1967 GMC C15/C1500 Pickup Intake Manifold Parts

Essential 1967 GMC C15/C1500 Pickup Intake Manifold Parts

Weiand – Action +Plus; Intake Manifold (Part No.8120P)

Action +Plus; Intake Manifold

from

$349.99
New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.

Product Features:
  • Low Rise/Dual Plane Design For Maximum Torque
  • Permanent Mold Casting Process
  • Lighter/Smoother/Better Looking/Consistent Casting
  • Dyno Proven To Make 25hp Over Competition
  • Fully CNC Machined For A Perfect Fit
  • Square Bore Carburetor Flange
  • Exhaust Crossover For Improved Street Drivability
See More

Weiand – Stealth; Intake Manifold (Part No.8019)

Stealth; Intake Manifold

from

$398.99


Product Features:
  • High Rise/Dual Plane Design For Maximum Torque
  • Fully CNC Machined For A Perfect Fit
  • Square Bore Carburetor Flange
  • Exhaust Crossover For Improved Street Drivability
  • Permanent Mold Casting Process
  • Lighter/Smoother/Better Looking
  • More Consistent Castings
See More

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish (Part No.27013)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish

from

$360.99
Edelbrock part #27013 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish (Part No.2101)

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

from

$257.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes
See More

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold (Part No.75011)

Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold

from

$713.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

Product Features:
  • Polished Version Of Edelbrock PN[7501]
  • Polish is Hand-Buffed for Brilliant Shine
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Holley – Intake Manifold (Part No.300-4)

Intake Manifold

from

$355.99
Holley Intake Manifolds feature a cast aluminum construction and have a long tradition of being one of the best products on the market. Review the information below for Holley intake specifications.

Product Features:
  • Single Plane/Open Plenum Design
  • Deep Plenum Design With Isolated Runners
  • 4150 Square Bore Carburetor Mounting Flange
  • Power Band 4500-8500 rpm
  • Height Front 4.75 in. Rear 6.25 in.
  • Port Size 1.85 in. Height 1.60 in. Width
See More

Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.26011)

Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

from

$674.99


Product Features:
  • Based on Performer Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Polished Finish Produces Brilliant Shine
  • Ideal for Street Rods and Street Machines
See More

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Bolt Kit Intake Hex Head

from

$9.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:
  • Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
  • 3/8 inch-16 by 1 inch bolts
  • Kit includes 12 bolts and washers
  • Manufactured from high quality steel
  • Bolts feature hex heads
See More

ARP Auto Racing – For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers (Part No.435-2001)

For Use With Chevy 396/ 454 Cubic Inch, Hex Head, Polished, Ss, With Washers

from

$63.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 Psi Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)

For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss

from

$44.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
  • 1″ Long
See More

ARP Auto Racing – For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers (Part No.435-2101)

For Use With Chevy 396/ 454 Cubic", 12 Point Head Type, Polished, With Washers

from

$65.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Wont Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers

from

$47.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Intake Manifold Bolts

from

$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:
  • Features 12-point Smaller-than-standard Bolt Head
  • Thick Flat Washers Distribute Optimum Clamp Load
  • Ideal Use Where Space Is Minimal On Race Manifolds
  • Bolts And Washers Zinc Plated For Protection
  • Zinc Plated For Protection
See More

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Intake Manifold Bolts

from

$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:
  • Grade 5 socket head bolts are zinc plated for protection and appearance
  • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
  • Washers Included
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5827)

Ultra Seal: Intake Gasket

from

$38.59
Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
See More

Edelbrock – Intake Manifold Gasket for 1958-1986 Small-Block Chevy (Part No.7201)

Intake Manifold Gasket for 1958-1986 Small-Block Chevy

from

$26.99


Product Features:
  • Clean Positive Seal
  • Embossed Silicone Bead Surrounding The Port
  • Matched To Manifolds And Cylinder Heads
See More

Edelbrock – Intake Manifold replacement runner to base gaskets (Part No.6950)

Intake Manifold replacement runner to base gaskets

from

$33.99
Product Features:
  • For Chevy 1957-86 302-327-350-400 S/B Tunnel Ram
  • For #7110
  • Includes Hardware
  • Multi Piece Configuration
  • Set of 5
See More

Mr. Gasket – Intake Gasket (Part No.121)

Intake Gasket

from

$27.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:
  • Made From Cellulose/nitrile Composition Material
  • Provides Excellent Sealing And Durability
  • Can Be Trimmed If Necessary For Modified Port App
See More

Mr. Gasket – Gskt Intake (Part No.5812)

Gskt Intake

from

$51.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5819)

Ultra Seal: Intake Gasket

from

$49.49
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90240-2)

Engine Intake Manifold Gasket Set

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
  • Includes all parts needed to complete the repair
See More

Edelbrock – Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs (Part No.2040)

Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs

from

$284.99
Edelbrock part #2040 Manifold Installation kit will simplify the process of adding more power and efficiency to your street rod or muscle car. It combines all the necessary components to replace your stock iron intake manifold with an Edelbrock aluminum i
See More

1967 GMC C15/C1500 Pickup Intake Manifold Parts

Maybe you’re in the middle of a full rebuild of that 1967 GMC C15/C1500 Pickup. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 28 different Intake Manifold Parts in our inventory ranging from $9.99 to $900.99. That means you can find the exact parts or products you need to keep that 1967 GMC C15/C1500 Pickup running smoothly.

Intake Manifold Parts are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1967 GMC C15/C1500 Pickup. Mr. Gasket, Edelbrock, and Spectre are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Intake Manifold Parts for your 1967 GMC C15/C1500 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1967 GMC C15/C1500 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Intake Manifold Parts Brands To Make Your 1967 GMC C15/C1500 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 GMC C15/C1500 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your C15/C1500 Pickup the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.

Popular Edelbrock Intake Manifold Parts

We carry Edelbrock parts in our stock across Intake Manifold Gasket Sets and Intake Manifolds categories, plus more. For a 1967 GMC C15/C1500 Pickup, our most popular Edelbrock Intake Manifold Parts include:
Intake Manifold Gasket for 1958-1986 E-Tec 200 Small-Block Chevy
from $47.99
(1)
Intake Manifold Gasket for 1958-1986 E-Tec 200 Small-Block Chevy
Intake Manifold Gasket Sets

FAQs for 1967 GMC C15/C1500 Pickup Intake Manifold Parts

What are the most purchased Intake Manifold Parts for the 1967 GMC C15/C1500 Pickup?

Out of 28 Intake Manifold Parts for the 1967 GMC C15/C1500 Pickup, the most popular in our inventory are:
Intake Manifold Gasket for 1958-1986 Small-Block Chevy
from $26.99
(12)
Intake Manifold Gasket for 1958-1986 Small-Block Chevy
Intake Manifold Gasket Sets
Bolt Kit Intake Hex Head
from $9.99
This product is not rated
Bolt Kit Intake Hex Head
Intake Manifold Bolt Sets
Engine Intake Manifold Gasket Set
from $19.99
(1)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets