1967 Chevrolet P20 Series Drive Shafts and Axles
More 1967 Chevrolet P20 Series Drive Shafts and Axles
Find your specific 1967 Chevrolet P20 Series original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1967 Chevrolet P20 Series Drive Shafts and Axles
Spicer – Universal Joint (Part No.5-1310X)
from
$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Driveworks – Universal Joint (Part No.DW-331BL)
from
$31.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
National – Multi Purpose Seal (Part No.8835S)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99162)
from
$25.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.481181N)
from
$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99112)
from
$36.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)
from
$13.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2002
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 3.50 INCH / 89 MM
- MOUNT WIDTH: 1.50 INCH / 38 MM
- COMPLETE MOUNT
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
Driveworks – Ball Bearing (Part No.S-206-FF)
National – Bearings (Part No.206-FF)
from
$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.HB-206-FF)
from
$46.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.HB-88508-A)
from
$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)
Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)
from
$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Popular 1967 Chevrolet P20 Series Drive Shafts and Axles Categories
1967 Chevrolet P20 Series Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1967 Chevrolet P20 Series. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 17 different Drive Shafts and Axles in our inventory ranging from $4.79 to $73.99. That means you can find the exact parts or products you need to keep that 1967 Chevrolet P20 Series running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Chevrolet P20 Series. National, Spicer, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1967 Chevrolet P20 Series, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 351 reviews in this category, some of the top rated parts include Bearings with 4.8 stars and Bearings with 2.3 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1967 Chevrolet P20 Series rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1967 Chevrolet P20 Series Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Chevrolet P20 Series demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your P20 Series the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Spicer Drive Shafts and Axles
We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1967 Chevrolet P20 Series, our most popular Spicer Drive Shafts and Axles include:
Top 1967 Chevrolet P20 Series Drive Shafts and Axles from National
National products are another trusted brand when it comes to Drive Shafts and Axles for your 1967 Chevrolet P20 Series. Popular National parts include:
FAQs for 1967 Chevrolet P20 Series Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1967 Chevrolet P20 Series?
Out of 17 Drive Shafts and Axles for the 1967 Chevrolet P20 Series, the most popular in our inventory are:
What are the top-rated 1967 Chevrolet P20 Series Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 1967 Chevrolet P20 Series based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
from
$17.49
(3)
Bearings
“This bearing was a perfect fit for use with the intermediate drive shaft on a 2009 Chev. Malibu with 2.4L engine and 6-spd. auto trans. (LE5 with MH8)”
