1967 Chevrolet K20 Panel Clutch Systems
Find Your Specific 1967 Chevrolet K20 Panel Clutch Systems
Below you will find various in-demand Chevrolet Clutch Systems, components and accessories for your 1967 K20 Panel. Advance Auto Parts has popular K20 Panel parts like Clutch Pressure Plates, Clutch Pivot Balls, Clutch Kits and more. You’ll also find aftermarket and OEM Clutch Systems for other K20 Panel model years. Select a category of 1967 Chevrolet K20 Panel Clutch Systems below and start saving instantly.
Popular 1967 Chevrolet K20 Panel Clutch Systems Categories
Essential Clutch Systems for 1967 Chevrolet K20 Panels
KAI – Clutch Pivot Ball (Part No.GMK4010951651)
from
$30.99
New Goodmark Clutch Bellcrank Pivot Ball Stud, Mounted On Frame
Product Features:
See More
Product Features:
- Mounted On Frame
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
KAI – Clutch Bellcrank Felt (Part No.GMK4041951589P)
from
$7.99
New Goodmark Pair Of Clutch Bellcrank Felt Seals
Product Features:
See More
Product Features:
- Pair
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Hays – Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp (Part No.92-1004)
from
$1049.99
Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp
Hays – Hays450 Cltch 55-85 GM 6-8Cyl:11In:10Sp (Part No.91-1004)
from
$499.99
Hays450 Cltch 55-85 GM 6-8Cyl:11In:10Sp
Hays – Hays450 Cltch 55-85 GM:10.5In:10Spl (Part No.91-1002)
from
$475.99
Hays450 Cltch 55-85 GM:10.5In:10Spl
ATP – Manual Transmission Flywheel (Part No.Z-296)
from
$219.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- No resurfacing required
- Improves performance
Hays – Power Train (Part No.10-130)
from
$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Hays – Flywhl:55-85 V6:Sbc:Bbc:348-409:14Lb:168 (Part No.20-130HYS)
from
$667.99
Flywhl:55-85 V6:Sbc:Bbc:348-409:14Lb:168
ATP – FLYWHEEL SHIM (Part No.GS-10)
from
$26.99
FLYWHEEL SHIM
ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.200-2802)
from
$31.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.
Product Features:
See More
Product Features:
- 3/4″ 12-Point Socket Size(s)
- 8740 Chromoly
- Black Oxide
- 7/16″-20 RH Thread Size
- Set of 6
- Chevy 90° V6 & 265-454 With 2-pc Rear Seal, Ford 289-460
- 1″ Underhead Length
ARP Auto Racing – 1"L Under Head, 7/16 Inch -20 Thread, 200000Psi Tensile, 12Point Head, Pack Of 6 (Part No.200-2807)
from
$25.99
Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating.
Product Features:
See More
Product Features:
- Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
- Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter For Increased Strength And Improved Flywheel Register
- High Performance Series Is Rated
- Increased Strength
- Chevy 90░ V6 & 305-502 With 1-pc Rear Seal
- 1″ Underhead Length
ARP Auto Racing – 3/8" – 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type (Part No.130-2201)
from
$26.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- Sold As A Kit
- 180,000 PSI
ARP Auto Racing – For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head (Part No.230-2202)
from
$44.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 200,000 PSI
- 1″ Underhead Length
- 3/8″-16 Thread Size
ATP – CLUTCH FORK (Part No.ZA-104)
from
$52.99
CLUTCH FORK
Upgrade your 1967 Chevrolet K20 Panel with Top-Quality Clutch Systems
When it comes to maintaining or upgrading your 1967 Chevrolet K20 Panel, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Clutch Systems are key to keeping your K20 Panel functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Clutch Systems for the 1967 Chevrolet K20 Panel, designed to meet your needs without breaking the bank.
From
Clutch Pressure Plate
replacements to
Clutch Pivot Balls
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 1967 Chevrolet K20 Panel at great prices.
Our Clutch Systems inventory for this model
ranges from just $7.99 to $1,049.99, with
an average price of $237.75.
Our 15 Clutch Systems in stock come from 4 trusted brands, so you’re sure to find the right part for your 1967 Chevrolet K20 Panel without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1967 Chevrolet K20 Panel is always ready to roll. We’re committed to providing you with everything you need to keep your K20 Panel in top shape, all in one place.
Start shopping confidently below for your 1967 Chevrolet K20 Panel!
Best-Selling Clutch Pressure Plates for 1967 Chevrolet K20 Panels
Enhance the driving experience in your Chevrolet with 2 quality Clutch Pressure Plate components, starting at $26.99.
ARP Auto Racing – For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head (Part No.230-2202)
from
$44.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 Psi
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 200,000 PSI
- 1″ Underhead Length
- 3/8″-16 Thread Size
ARP Auto Racing – 3/8" – 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type (Part No.130-2201)
from
$26.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- Sold As A Kit
- 180,000 PSI
Most Popular 1967 Chevrolet K20 Panel Clutch Pivot Balls
Customize your Chevrolet with 1 Clutch Pivot Balls products
like Clutch Pivot Balls, all
priced under $30.99.
KAI – Clutch Pivot Ball (Part No.GMK4010951651)
from
$30.99
New Goodmark Clutch Bellcrank Pivot Ball Stud, Mounted On Frame
Product Features:
See More
Product Features:
- Mounted On Frame
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Top Picks for 1967 Chevrolet K20 Panel Clutch Kits
Upgrade Chevrolet K20 Panels with top-quality Clutch Kits parts, including 3 OEM and aftermarket selections for your 1967 model.
Hays – Hays450 Cltch 55-85 GM 6-8Cyl:11In:10Sp (Part No.91-1004)
from
$499.99
Hays450 Cltch 55-85 GM 6-8Cyl:11In:10Sp
Hays – Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp (Part No.92-1004)
from
$1049.99
Hays650 Cltch 55-85 GM 6-8Cyl:11In:10Sp
Hays – Hays450 Cltch 55-85 GM:10.5In:10Spl (Part No.91-1002)
from
$475.99
Hays450 Cltch 55-85 GM:10.5In:10Spl
In-Demand Clutch Forks for 1967 Chevrolet K20 Panels
Select from 1 premium Clutch Forks parts for your 1967 Chevrolet K20 Panel.
ATP – CLUTCH FORK (Part No.ZA-104)
from
$52.99
CLUTCH FORK
Most Sold 1967 Chevrolet K20 Panel Flywheels
Explore our best-selling Chevrolet parts for the 1967 K20 Panel among 7 OEM and aftermarket options starting from $25.99.
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel (Part No.Z-296)
from
$219.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- No resurfacing required
- Improves performance
ARP Auto Racing – 1"L Under Head, 7/16 Inch -20 Thread, 200000Psi Tensile, 12Point Head, Pack Of 6 (Part No.200-2807)
from
$25.99
Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating.
Product Features:
See More
Product Features:
- Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
- Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter For Increased Strength And Improved Flywheel Register
- High Performance Series Is Rated
- Increased Strength
- Chevy 90░ V6 & 305-502 With 1-pc Rear Seal
- 1″ Underhead Length
ATP – FLYWHEEL SHIM (Part No.GS-10)
from
$26.99
FLYWHEEL SHIM
Hays – Flywhl:55-85 V6:Sbc:Bbc:348-409:14Lb:168 (Part No.20-130HYS)
from
$667.99
Flywhl:55-85 V6:Sbc:Bbc:348-409:14Lb:168
Hays – Power Train (Part No.10-130)
from
$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.200-2802)
from
$31.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.
Product Features:
See More
Product Features:
- 3/4″ 12-Point Socket Size(s)
- 8740 Chromoly
- Black Oxide
- 7/16″-20 RH Thread Size
- Set of 6
- Chevy 90° V6 & 265-454 With 2-pc Rear Seal, Ford 289-460
- 1″ Underhead Length
FAQs for 1967 Chevrolet K20 Panel Clutch Systems
Which Clutch Systems are best-sellers for 1967 Chevrolet K20 Panels?
Out of 15 Clutch Systems that fit 1967 Chevrolet K20 Panels, the following parts are the top sellers:
- Flywheel Ring Gear (3923452) – $29.99
- Manual Transmission Flywheel (3922901) – $219.99
- For Use With 265/ 502 Chevy V8, 3/8"-16 Thread, 200000Psi Tensile, Hex Head (11529974) – $44.99
What’s the price range for 1967 Chevrolet K20 Panel Clutch Systems?
Clutch System prices for the 1967 Chevrolet K20 Panel start at $7.99 and go up to $1,049.99 for the most premium parts.
What’s the average price of a Clutch System for a 1967 Chevrolet K20 Panel?
The average price for Clutch Systems for the 1967 Chevrolet K20 Panel is $237.75. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Clutch Systems for my 1967 Chevrolet K20 Panel?
The cheapest 1967 Chevrolet K20 Panel Clutch Systems we carry in stock are:
- Clutch Bellcrank Felt (11749279) – $7.99
- 1"L Under Head, 7/16 Inch -20 Thread, 200000Psi Tensile, 12Point Head, Pack Of 6 (11530151) – $25.99
- FLYWHEEL SHIM (10860941) – $26.99
- 3/8" – 16 Thread Size, 180000 Psi Tensile Strength, Hex Style Head Type (11530092) – $26.99
- Flywheel Ring Gear (3923452) – $29.99
What types of Clutch Systems do you sell for my 1967 Chevrolet K20 Panel?
As of 11/2/25, these are some of the most in-demand types of Clutch Systems for a 1967 Chevrolet K20 Panel:
Can I get help with 1967 Chevrolet K20 Panel Clutch System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Clutch Systems and more.
What is your return policy for Chevrolet K20 Panel Clutch Systems?
Advance Auto Parts keeps returns simple. For new Chevrolet K20 Panel Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
