1967 Chevrolet Impala Bodies and Fender Parts
More 1967 Chevrolet Impala Bodies and Fender Parts
Find your specific 1967 Chevrolet Impala original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1967 Chevrolet Impala Bodies and Fender Parts
KAI – Floor Plug (Part No.GMK4020512671)
from
$3.99
New Goodmark Rubber Floor Pan Plug, 1 Inch Diameter, Use As Required
Product Features:
See More
Product Features:
- 1 Inch Diameter Use As Required
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Plug (Part No.GMK403051264A)
from
$4.99
New Goodmark Galvanized Floor Drain Plug, Use As Required
Product Features:
See More
Product Features:
- Use As Required
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Plug (Part No.GMK4030512641A)
from
$4.99
New Goodmark Galvanized Floor Drain Plug With Notch
Product Features:
See More
Product Features:
- With Notch
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK404450065R)
from
$449.99
New Goodmark Passenger Side Floor Pan, From Firewall To Rear Footwell
Product Features:
See More
Product Features:
- From Firewall To Rear Footwell
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Moulding Clip (Part No.WF 205)
from
$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8 In. X 11/16 In. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Dorman – Windshield Garnish Clip – Exterior (Part No.963-211)
from
$4.99
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
Dorman – GM Blind Rivet Retainer – Diameter 3/16 In. (Part No.963-205D)
from
$4.49
Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.
Product Features:
See More
Product Features:
- Available in blind, push-in and screw-in styles
- Constructed of high-quality materials for long-lasting durability
- Also suitable for a broad variety of industrial and commercial uses
- Packaged in a variety of piece counts for use with both small and large projects
Metro Mould – Moulding Clip (Part No.WF 211)
from
$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Windshield Reveal Molding Clip. Made of steel. 15/16 In. X 3/4 In. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Pillar Post Seal (Part No.CZ 8104)
from
$73.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Finely crafted and detailed. All of Metro’s Door Lock Pillar Seals are the best available anywhere. They are the best, with molded-in steel cores and superbly detailed outer rubber. Windshield Pillar Post Seals for Convertibles. Sponge reproduction with a jet black, smooth skin. Each. piece is 23-3/16 In. long. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hardtop Moulding (Part No.RR 5014)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals, for 2-Door Hardtop. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Windshield Seal (Part No.BT 1)
from
$27.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16 In. wide X 15 Ft. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Energy Suspension – BodyMntBshKt (Part No.3.4167R)
from
$218.99
BodyMntBshKt
Energy Suspension – Body Mount Set (Part No.3.4136R)
from
$167.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – BodyMntBshKt (Part No.3.4166R)
from
$150.99
BodyMntBshKt
Energy Suspension – Body Mount Set (Part No.3.4138R)
from
$106.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Fender Emblem (Part No.GMK4010130653)
from
$21.99
New Goodmark Fender Emblem, 327, Made Of Steel
Product Features:
See More
Product Features:
- 327 Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Emblem (Part No.GMK4030130644)
from
$29.99
New Goodmark Fender Emblem, V-Flags, For Models With Small Block V8, 2 Required Made Of Steel
Product Features:
See More
Product Features:
- V-Flags For Models With Small Block V8 2 Required Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Hardtop Moulding (Part No.RR 8120)
from
$146.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals. Made of smooth, black, skin-covered sponge. 82 In. long. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Body Seal Kit (Part No.RKB 2007-112)
from
$192.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro Basic Weatherstrip Kits are designed with parts matched to meet and exceed the specifications of the original part. Basic Kit, for 2-Door Hardtop (Sport). Door (LM 18-I) Roof Rail (RR 5014-A) Trunk (TK 46-18), Seals. This basic kit from Metro includes the matched door seals and roof rails, along with the trunk seal to keep the elements out of your car. Additional important weather seals and detail rubber parts are also available from Metro for many classic and late model vehicles.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – ROOF RAIL SEAL (Part No.RR 5007-C)
from
$180.99
ROOF RAIL SEAL
Metro Mould – ROOF RAIL SEAL (Part No.RR 5007-E)
from
$197.99
ROOF RAIL SEAL
Metro Mould – Hardtop Moulding (Part No.RR 5007-A)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals, for 2-Door Hardtop (Sport). 82 In. long. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – A-Pillar Trim Plug (Part No.GMK4010453621S)
from
$16.99
New Goodmark 12 Piece Trim Panel Mounting Plug Set
Product Features:
See More
Product Features:
- 12 Piece
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Popular 1967 Chevrolet Impala Bodies and Fender Parts Categories
1967 Chevrolet Impala Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 1967 Chevrolet Impala. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 11 different Bodies and Fender Parts in our inventory ranging from $3.49 to $449.99. That means you can find the exact parts or products you need to keep that 1967 Chevrolet Impala running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Chevrolet Impala. KAI, Energy Suspension, and Metro Mould are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 1967 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1967 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 1967 Chevrolet Impala Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
Popular Metro Mould Bodies and Fender Parts
We carry Metro Mould parts in our stock across Weatherstripping categories, plus more. For a 1967 Chevrolet Impala, our most popular Metro Mould Bodies and Fender Parts include:
FAQs for 1967 Chevrolet Impala Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 1967 Chevrolet Impala?
Out of 11 Bodies and Fender Parts for the 1967 Chevrolet Impala, the most popular in our inventory are:
