1967 Chevrolet G10 Van Differentials

More 1967 Chevrolet G10 Van Differentials

Find your specific 1967 Chevrolet G10 Van original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1967 Chevrolet G10 Van Differentials

Powertrax – Grip LOK Traction System (Part No.LK436035)

Grip LOK Traction System

from

$684.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
View Product

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More
View Product

Yukon Gear – Replacement Trail Repair Kit For Dana 30 And 44 With 1350 Size U/Joint And Straps (Part No.32280)

Replacement Trail Repair Kit For Dana 30 And 44 With 1350 Size U/Joint And Straps

from

$481.99
Yukon replacement trail repair kit for Dana 30 and 44 with 1350 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:
  • Fits Dana Spicer 30 and 44
  • 1350 u-joint size
  • Kit includes yoke, U-joint, pinion seal, pinion nut and washer, straps, bolts and threadlocker
See More
View Product

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Dana 30 / 44 Roll Pin Replacement

from

$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:
  • Roll pin for Dana Spicer 30 and Dana Spicer 44
  • 0.235″ diameter
See More
View Product

USA Standard Gear – Axle Shaft For 2WD 12 Bolt Truck & 8.5" Van Rear (Part No.35055)

Axle Shaft For 2WD 12 Bolt Truck & 8.5" Van Rear

from

$188.99
USA Standard axle shaft for 2WD 12 bolt truck & 8.5″ van rear. 33 3/8″ long, 30 spline, 5 lug.

Product Features:
  • Fits GM 12 bolt truck with 2 wheel drive and van
  • 30 spline
  • 33 3/8″ long
  • 5 lug
See More
View Product

Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc

from

$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 60
  • Fits standard open and Trac Loc applications
See More
View Product

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More

from

$4.99
3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:
  • Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
See More
View Product

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

(17 reviews)
View Product

Dorman – Premium Ring And Pinion Master Bearing And Installation Kit (Part No.797-105)

Premium Ring And Pinion Master Bearing And Installation Kit

from

$249.99
If you’re repairing or rebuilding a front or rear differential and want the best performance and longevity from the bearings being replaced, choose this premium differential kit. It includes high-precision bearings manufactured to tighter tolerances and engineered to last longer than common lower-grade bearings that have more backlash when subjected to the torque generated within the differential. This convenient kit also saves the time needed to source individual components. Check the product attributes and fitment details to select the correct premium differential kit for your application.

Product Features:
  • Ideal solution – this premium differential bearing kit features high-precision bearings to help ensure longer bearing life, prevent backlash, and restore proper differential operation
  • Direct replacement – the components in this all-in-one kit are engineered to precisely match the fit and function of the original equipment bearings for a seamless installation
  • Increased reliability – the premium bearings in this kit are manufactured to exacting tolerances and specifications from high quality materials to help ensure optimal performance
  • Application-specific – check the product attributes and fitment details to choose the correct kit for your application
See More
View Product

Yukon Gear – Set Up Bearing (Part No.56039)

Set Up Bearing

from

$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 60
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More
View Product

FAG US – SHAFT SEAL (Part No.SS2776)

SHAFT SEAL

from

$19.79
SHAFT SEAL
View Product

Motive Gear – Differential Gear Install Kit (Part No.GM8.2IK)

Differential Gear Install Kit

from

$65.99


Product Features:
  • MINI INSTALL KIT GM 10BLT 8.2
See More
View Product

National – Bearings (Part No.HM89410)

Bearings

from

$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Yukon Gear – Pinion Nut Washer (Part No.33166)

Pinion Nut Washer

from

$23.99
Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2″ & 63-79 Corvette.

Product Features:
  • Pinion nut washer for GM 12 bolt car and truck, 1955-1964 GM car and truck, GM 8.2″ and 1963-1979 Corvette.
See More
View Product

Yukon Gear – Replacement Crush Sleeve For Dana 60 (Part No.33089)

Replacement Crush Sleeve For Dana 60

from

$8.99
Replacement crush sleeve for Dana 60, APROX 0.660″ long.

Product Features:
  • Crush sleeve for Dana Spicer 60
  • 0.660″ tall
See More
View Product

Yukon Gear – Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.32041)

Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up

from

$338.99
Yukon Performance steel spool for Dana 44 with 30 spline axles. fits 3.92 and up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 44 with 30 spline axles
  • 3.92 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More
View Product

Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)

Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75"

from

$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
  • 3/4″ x 16 thread
See More
View Product

Yukon Gear – Standard Open Spider Gear Replacement Kit For Dana 60 And 61 With 35 Spline Axles (Part No.16085)

Standard Open Spider Gear Replacement Kit For Dana 60 And 61 With 35 Spline Axles

from

$301.99
Yukon standard open spider gear replacement kit for Dana 60 and 61 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Dana Spicer 60 open differential with 35 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More
View Product

Yukon Gear – Bearing Race Driver (Part No.56017)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89410 race
  • All steel construction
See More
View Product

Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)

Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement

from

$6.99
Product Features:
  • Inner oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More
View Product

Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)

Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U

from

$19.99
Product Features:
  • Pinion preload shims for Dana Spicer 60 and 70U
See More
View Product

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

O-Ring For Dana 60 Zip Locker Seal Housing

from

$11.29
Product Features:
  • O-ring for seal housing
  • Fits Dana Spicer 60
See More
View Product

Yukon Gear – Replacement Cross Pin Shaft For Dana 60, Fits Standard Open And Trac Loc Posi (Part No.33314)

Replacement Cross Pin Shaft For Dana 60, Fits Standard Open And Trac Loc Posi

from

$26.99
Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 60
See More
View Product

Yukon Gear – Zip Locker Rear Switch Cover (Part No.34010)

Zip Locker Rear Switch Cover

from

$7.99
ZIP locker rear switch cover.

Product Features:
  • Cover for switch
  • Rear
See More
View Product

Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)

Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles

from

$15.99
Product Features:
  • Carrier shim kit for Dana Spicer 30 with 30 spline axles
See More
View Product

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More
View Product

Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Aggressive (Part No.16151)

Replacement Clutch Set For Dana 44 Powr Lok, Aggressive

from

$232.99
Product Features:
  • Clutch kit
  • Fits Dana Spicer 44 and Chrysler 8.75″ Powr Lok
  • Aggressive design
See More
View Product

Yukon Gear – 18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16110)

18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$483.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 18 piece kit
  • Steel clutches
See More
View Product

Popular 1967 Chevrolet G10 Van Differentials Categories

Differential Oil
Differential Oil
Rear Differential Cover Gaskets
Rear Differential Cover Gaskets
Differential Open Unit and Components
Differential Open Unit and Components
Differential Covers
Differential Covers
Differential Pinion Shaft Lock Bolts
Differential Pinion Shaft Lock Bolts
Differential Bearings
Differential Bearings
Differential Axle Shafts
Differential Axle Shafts
Differential Pinion Pilot Bearings
Differential Pinion Pilot Bearings
Differential Cover Bolts
Differential Cover Bolts
Differential Carriers
Differential Carriers
Differential Bearing Kits
Differential Bearing Kits
Front Differential Pinion Bearings
Front Differential Pinion Bearings

1967 Chevrolet G10 Van Differentials

Maybe you’re in the middle of a full rebuild of that 1967 Chevrolet G10 Van. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 265 different Differentials in our inventory ranging from $0.91 to $1,969.99. That means you can find the exact parts or products you need to keep that 1967 Chevrolet G10 Van running smoothly.

Differentials are only as good as their brand. We stock 15 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Chevrolet G10 Van. Valvoline, Yukon Gear, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1967 Chevrolet G10 Van, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 84 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 5.0 stars and Differential Carrier Shim Kit with 2.7 stars.

So if you’re in the market for aftermarket Differentials to keep your 1967 Chevrolet G10 Van rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1967 Chevrolet G10 Van Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Chevrolet G10 Van demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G10 Van the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1967 Chevrolet G10 Van, our most popular Driveworks Differentials include:
Oil Seal
from $6.29
(1)
Oil Seal
Differential Pinion Seals

FAQs for 1967 Chevrolet G10 Van Differentials

What are the most purchased Differentials for the 1967 Chevrolet G10 Van?

Out of 265 Differentials for the 1967 Chevrolet G10 Van, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24
from $11.99
This product is not rated
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24
Differential Ring Gear Bolts
DIFFERENTIAL GASKET
from $7.99
(3)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets

What are the top-rated 1967 Chevrolet G10 Van Differentials?

Top-rated Differentials for your 1967 Chevrolet G10 Van based on customer reviews/ratings are:
Differential Ring And Pinion
from $350.99
(7)
Differential Ring And Pinion
“Great spark plugs.”
Differential Carrier Shim Kit
from $8.49
(3)
Differential Carrier Shim Kit
“worked great”
Differential Ring And Pinion
from $350.99
(2)
Differential Ring And Pinion
“I have a Chevy Impala 07 that runs on 3 cylinders when not needing the power of 6, and the new plugs have significantly provided an inexpensive tuneup”

More Popular Parts for All Makes