1967 Chevrolet El Camino Valve Cover and Cylinder Heads

Essential 1967 Chevrolet El Camino Valve Cover and Cylinder Heads

Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)

Engine Valve Cover Load Spreader Set

from

$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Sealed Power – Engine Valve Lifter (Part No.HT-817R)

Engine Valve Lifter

from

$8.49
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:
  • Retro-fit performance
  • High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
  • Eliminates frequent lash adjustments
  • Significant friction reduction substantially increases horsepower and fuel economy
  • Delivers quieter engine operation
  • Application-specific design for perfect fit and correct operation
See More

Mr. Gasket – Head Gasket (Part No.1131G)

Head Gasket

from

$32.99
Mr. Gasket Steel Shim Cylinder Head Gaskets are for high performance street machines, drag racing and oval track racing. With today’s extreme compression ratios you need stronger more durable gaskets. Mr. Gasket steel shim gaskets are made from .020 inch steel shim stock which is thinner than most composite gaskets increasing engine compression. Stress formed embossments will seal the extreme cylinder pressure.

Product Features:
  • Manufactured from .020″ steel shim stock.
  • Thinner than composition head gaskets – increases engine compression.
  • Stress formed embossments seal extreme cylinder pressures.
  • For high performance street, drag race and oval track use.
See More

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16

from

$78.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 PSI
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Set of 16
  • .800″ Adjuster Thread Length
  • 3/8-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application
See More

Spectre – Engine Dress Steel Up Kit (Part No.54083)

Engine Dress Steel Up Kit

from

$119.99
Spectre’s Engine Dress-Up Kit was designed for the ’58-’86 Chevrolet small block 265-400. This kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stainless steel braided PCV hose with red/blue Magna-Clamps. Designed for use with OE specifications for fit and function, Spectre products are engineered to perform as good as they look.

Product Features:
  • For Chevrolet small block 265 and 400
  • Kit includes: stock height baffled covers, chrome T-bar hold downs, chrome PCV breather, chrome breather, chrome oil filler cap, grommets, and a stain
  • Designed for use with OE specifications for fit and function
  • Made from high quality material
See More

Felpro – CYLINDER HEAD GASKET SPACER SHIM (Part No.8180 SP-1)

CYLINDER HEAD GASKET SPACER SHIM

from

$23.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Premium quality parts
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Contains all the parts needed to complete the repair unless otherwise noted
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-138)

Engine Valve Spring Retainer Keeper

from

$0.30
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Mr. Gasket – Chrome Valve Cover Wing Bolts (Part No.9824)

Chrome Valve Cover Wing Bolts

from

$15.99
Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:
  • Fits Chevy V8
  • Standard Y Top 1/4 In-20 X 5/8 in L
  • Chrome Plated Steel
  • Overall Length: 4.64″
  • Installed Length: 4.00″
  • Pack of 4
See More

Sealed Power – Engine Exhaust Valve (Part No.V-1904)

Engine Exhaust Valve

from

$6.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)

Engine Rocker Arm Nut

from

$0.95
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Edelbrock – E-Street Big-Block ChevyHead Cylinder Head Oval COMPLETE Single (Part No.50459)

E-Street Big-Block ChevyHead Cylinder Head Oval COMPLETE Single

from

$1279.99
The Edelbrock #50459 E-Street cylinder 290 Oval Port head is designed for Big-Block applications. The Edelbrock E-Street cylinder head offers American made quality and affordable performance. E-Street cylinder head features as-cast ports and are designed

Product Features:
  • Oval Port Complete Single For Hydraulic Flat Tappet
  • 110cc Combustion Chamber Volume
  • 220cc Intake/110cc Exhaust Runner Volume
  • 2.19 in. Intake/1.88 in. Exhaust Valve Diameter
  • 0.562 in. Deck Thickness
See More

Sealed Power – Engine Rocker Arm Kit (Part No.R-973)

Engine Rocker Arm Kit

from

$6.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Complete rocker arm assembly
  • 1 Arm
  • 1 Ball
  • 1 Nut
  • Utilizes ISO & QS certified manufacturing
See More

Edelbrock – Valve Seat for B/B Chevy heads with 2.19" Valves (Part No.9716)

Valve Seat for B/B Chevy heads with 2.19" Valves

from

$22.99
Product Features:
  • 2.19 in.
  • Ductile Iron Material
  • Intake
  • Sold Individually
  • Made In The USA
See More

Sealed Power – Engine Push Rod (Part No.RP-3164)

Engine Push Rod

from

$2.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Sealed Power – Engine Rocker Arm Ball (Part No.MR-1783)

Engine Rocker Arm Ball

from

$0.65
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Holley – Chrome Valve Cover (Part No.241-80)

Chrome Valve Cover

from

$76.99
Dress up your engine with a new set of Holley custom valve covers.

Product Features:
  • Holley Embossed Logo
See More

Edelbrock – Classic Series Valve Covers: Big Block Chevy 396-502 1965 & Up, Black Aluminum (Part No.41853)

Classic Series Valve Covers: Big Block Chevy 396-502 1965 & Up, Black Aluminum

from

$391.99
The Edelbrock part #41853 Classic Series Valve Covers are designed for Chevy Big-Block V8 1965 & Later applications and have a Black finish. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:
  • Big Block Chevy 396-502 1965 & Up
  • Tall
  • Black Aluminum
  • Set Of Two
See More

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

ARP Cylinder Head Stud Kit

from

$298.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. 

Product Features:
  • 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Small Block Chevy
  • Sold As A Kit
See More

Edelbrock – Sure Seat Valve Springs for Cylinder Heads (Part No.5823)

Sure Seat Valve Springs for Cylinder Heads

from

$152.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Edelbrock – Sure Seat Valve Springs for Cylinder Heads (Part No.5745)

Sure Seat Valve Springs for Cylinder Heads

from

$181.99
Product Features:
  • Non-Rotator Type
  • 1.550 in. Outer Diameter
  • 0.805 in. Inner Diameter
  • Dual Coil Spring Type
  • Set of 16
See More

Dorman – Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In. (sold by each) (Part No.090-046)

Pipe Plug C.S. Hex 1/8-27 Npt X 5/16 In. (sold by each)

from

$1.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-1/8 In., SC, Height 0.470 (Part No.362639.1)

Steel Cup Expansion Plug 1-1/8 In., SC, Height 0.470

from

$1.29
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 7619 B-1)

Cylinder Head Gasket Set

from

$35.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Engineered and manufactured specifically for the repair environment
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 8007 PT-3)

Cylinder Head Gasket Set

from

$89.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 7733 SH-2)

Cylinder Head Gasket Set

from

$35.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
  • Application specific design to ensure a perfect fit and premium seal
  • Premium quality parts you can trust
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 74034)

CYLINDER HEAD BOLT SET

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)

For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers

from

$106.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:
  • High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
  • Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
  • Rated At 180,000 PSI Tensile Strength
  • High Performance Head Bolts Are Stronger
See More

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile

from

$164.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:
  • Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
  • Nominally Rated At 200,000 Psi Tensile Strength
  • These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
  • Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
See More

1967 Chevrolet El Camino Valve Cover and Cylinder Heads

Maybe you’re in the middle of a full rebuild of that 1967 Chevrolet El Camino. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 69 different Valve Cover and Cylinder Heads in our inventory ranging from $0.43 to $1,575.99. That means you can find the exact parts or products you need to keep that 1967 Chevrolet El Camino running smoothly.

Valve Cover and Cylinder Heads are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1967 Chevrolet El Camino. Sealed Power, FELPRO, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1967 Chevrolet El Camino, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 269 reviews in this category, some of the top rated parts include Chrome Valve Cover Wing Bolts with 4.4 stars and Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel with 4.4 stars.

So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1967 Chevrolet El Camino rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Valve Cover and Cylinder Heads Brands To Make Your 1967 Chevrolet El Camino Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1967 Chevrolet El Camino demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your El Camino the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.

Popular Edelbrock Valve Cover and Cylinder Heads

We carry Edelbrock parts in our stock across Engine Valve Springs and Cylinder Heads categories, plus more. For a 1967 Chevrolet El Camino, our most popular Edelbrock Valve Cover and Cylinder Heads include:
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
from $60.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
Engine Valve Springs

FAQs for 1967 Chevrolet El Camino Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the 1967 Chevrolet El Camino?

Out of 69 Valve Cover and Cylinder Heads for the 1967 Chevrolet El Camino, the most popular in our inventory are:
Engine Valve Lifter
from $13.99
(15)
Engine Valve Lifter
Engine Valve Lifters
Engine Push Rod
from $2.99
(5)
Engine Push Rod
Push Rods
Engine Rocker Arm Nut
from $0.95
(4)
Engine Rocker Arm Nut
Rocker Arm Nuts

What are the top-rated 1967 Chevrolet El Camino Valve Cover and Cylinder Heads?

Top-rated Valve Cover and Cylinder Heads for your 1967 Chevrolet El Camino based on customer reviews/ratings are:
Chrome Valve Cover Wing Bolts
from $15.99
(9)
Chrome Valve Cover Wing Bolts
“good”
Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel
from $56.99
(7)
Signature Series Valve Covers: Small Block Chevy 262-400 1959-86, Chrome Steel
“Used to replace my bent up covers easy install bolted right up”
Engine Rocker Arm Kit
from $3.49
(6)
Engine Rocker Arm Kit
“The rocker was what i needed and was hard to find. You guys helped out well and were right in the neighborhood thanks”