1967 Chevrolet Corvette Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1967 Chevrolet Corvettes

KAI – Fuel Tank (Part No.FTK010354)

Fuel Tank

from

$231.99
New Platinum Pro Fuel Tank 24 Gallon

Product Features:
  • 24 Gallon, Includes Lock Ring, With EEC, 370HP
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Spectra Premium – Fuel Tank (Part No.GM45C)

Fuel Tank

from

$383.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

WSO – Air Pump (Part No.B6010190718WSO)

Air Pump

from

$243.44
Air Pump

GM Genuine Parts – Secondary Air Injection Pump (Part No.215-426)

Secondary Air Injection Pump

from

$280.99
GM Genuine Parts Secondary Air Injection Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The secondary air system injects air into your vehicle’s downstream exhaust system to assist in minimizing emissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps maintain controlled air flow to proper air injection components
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)

Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy

from

$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:
  • Black Anodized Finish
  • Billet Aluminum Material
  • Mounting Hardware Included
  • Includes 1.5 mm Gasket
  • For Small-Block Chevy
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)

Fuel Pump Block-Off Plate

from

$12.99
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
  • Easy Installation
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)

Mechanical Fuel Pump Mounting Pad Cover

from

$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Cover Hole In Block When Mech. Fuel Pump Is Removed
See More

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Dorman – Help – Air Check Valve (Part No.55050)

Air Check Valve

from

$8.49
The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.

Product Features:
  • Emissions, A.I.R Check Valves – 1994-64 AMC, GM, Chrysler, Fiat, Isuzu, Jaguar, Jeep, MG, Nissan,VW
  • Air Check Valve
  • The A.I.R. Check Valve is an emission control device that allows air into the exhaust system to help burn pollutants. Our A.I.R Check Valve is made to withstand the heat of the exhaust manifold.
  • Include gaskets and mounting hardware for a complete repair
  • Direct replacement for a proper fit every time
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)

Secondary Air Injection Pump Check Valve

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Edelbrock – EGR Valve Adapter #8035 For Chevy Small-Block Gen I (Part No.8035)

EGR Valve Adapter #8035 For Chevy Small-Block Gen I

from

$33.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Carquest Premium – Fuel Pump U2541854 (Part No.U2541854)

Fuel Pump U2541854

from

$80.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Pump Includes Includes Strainer (Part No.E219654)

Fuel Pump Includes Includes Strainer

from

$61.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Pump E3542556 (Part No.E3542556)

Fuel Pump E3542556

from

$207.99
Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Delphi – Electric Fuel Pump: With Grommet, Insulating Sleeve, Isolator, Pump Retainer, Seals, Isolator (Part No.FE0110)

Electric Fuel Pump: With Grommet, Insulating Sleeve, Isolator, Pump Retainer, Seals, Isolator

from

$112.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • Lower amperage draws less load on vehicle’s electrical system
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Carquest Premium – Fuel Pump (Part No.E219657)

Fuel Pump

from

$48.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)

Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block

from

$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:
  • Black AnodizedFinish
  • High Capacity Fuel Rails
  • For Use W/ Pro-Flo XT Manifold #7137
  • -6 AN Inlet / Outlet
  • Made In The USA
See More

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Fuel Pump Push Rod

from

$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:
  • Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles.
  • Ideal solution – this rod is a reliable replacement for an original part that has failed
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)

FUEL PUMP PUSH ROD, CHEVY 1 EA

from

$53.99
When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.

Product Features:
  • Lightweight tubing with bronze tip for steel cams
  • 5.75″ Length
  • Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod
See More

Upgrade your 1967 Chevrolet Corvette with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1967 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Fuel and Emissions Systems for the 1967 Chevrolet Corvette, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Smog Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1967 Chevrolet Corvette at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $8.49 to $316.99, with an average price of $102.83. Our 24 Fuel and Emissions Systems in stock come from 11 trusted brands, so you’re sure to find the right part for your 1967 Chevrolet Corvette without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1967 Chevrolet Corvette, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Mr. Gasket Dorman, and more. Mr. Gasket Fuel and Emissions Systems start at just $12.99 and boast an impressive 4 stars average rating from customers. With 84 customer reviews and counting, our 1967 Chevrolet Corvette Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1967 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place. Start shopping confidently below for your 1967 Chevrolet Corvette!

Best-Selling Fuel Pumps for 1967 Chevrolet Corvettes

Enhance the driving experience in your Chevrolet with 16 quality Fuel Pump components, starting at $10.99.

Dorman – Help – Fuel Pump Push Rod (Part No.03875)

Fuel Pump Push Rod

from

$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.

Product Features:
  • Direct replacement – this fuel pump push rod is designed to match the fit and function of the original rod on specified vehicles.
  • Ideal solution – this rod is a reliable replacement for an original part that has failed
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Mechanical Fuel Pump (Part No.1541134)

Mechanical Fuel Pump

from

$27.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function.
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance.
  • All fuel pumps are 100% performance tested.
  • Includes installation gaskets or seals where applicable.
See More

Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)

Performer RPM Series fuel pump for SBC and W Series Chevy

from

$168.99


Product Features:
  • Unique Valve Design
  • Improves Flow Quantity/Quality
  • Supports Engines Up To 550 HP
  • Hi-Vol 0.375 in. NPT Inlet/Outlet
  • Produces 6 psi
  • Gasoline Or Mixed Fuels Only
See More

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Electric Fuel Pump

from

$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • They Make An Excellent Fuel Transfer or Booster Pump
  • Not designed for use on aircraft of any type.
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1516)

Fuel Pump Block-Off Plate

from

$12.99
Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
  • Easy Installation
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Holley – Mechanical Fuel Pump (Part No.12-454-20)

Mechanical Fuel Pump

from

$212.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 170 gph Free Flow
  • Shutoff Pressure Pre-Set At 8 PSI
  • Fuel Pressure Regulator Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Redesigned High Flow Valves Ensure Adequate Fuel Delivery
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • 3/4in.-16 Inlet And Outlet Ports
  • Fittings Not Included
See More

Holley – Mechanical Fuel Pump (Part No.12-835)

Mechanical Fuel Pump

from

$124.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • Street Performance
  • Flows 80 gph Free Flow
  • Shutoff Pressure Pre-Set 7.5 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 1/4 in. NPT
See More

Edelbrock – Victor Series fuel pump is for Big-Block Chevrolet (Part No.1712)

Victor Series fuel pump is for Big-Block Chevrolet

from

$185.99
Edelbrock part #1712 Victor Series fuel pump is for Big-Block Chevrolet. The Edelbrock Victor Series fuel pump is a must for drag racing, circle track racing, street machines or any application that demands a high-volume fuel delivery, these fuel pumps fe

Product Features:
  • Hi-Vol 0.5 in. NPT Inlet/Outlet
  • Large Alcohol-Proof Diaphragm
  • Aircraft-Type Allen Bolts
  • Produces 10 psi
  • For Gasoline Only
  • Finest Quality Material
  • Beautifully Detailed
  • Use w/Fuel Pressure Regulator PN[8190]
See More

Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)

Victor Series fuel pump is for SBC and W Series Chevrolet

from

$174.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).

Product Features:
  • Hi-Vol 0.5 in. NPT Inlet/Outlet
  • Large Alcohol-Proof Diaphragm
  • Aircraft-Type Allen Bolts
  • Produces 10 psi
  • For Gasoline Only
  • Finest Quality Material
  • Beautifully Detailed
  • Use w/Fuel Pressure Regulator PN[8190]
See More

Carquest Premium – Mechanical Fuel Pump 2542671: Includes Gasket (Part No.2542671)

Mechanical Fuel Pump 2542671: Includes Gasket

from

$63.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

KAI – Fuel Pump Module Assembly (Part No.FMD010083)

Fuel Pump Module Assembly

from

$62.99
New Platinum Pro Fuel Pump Module

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)

FUEL PUMP PUSH ROD, CHEVY 1 EA

from

$53.99
When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.

Product Features:
  • Lightweight tubing with bronze tip for steel cams
  • 5.75″ Length
  • Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod
See More

Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)

Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy

from

$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.

Product Features:
  • Black Anodized Finish
  • Billet Aluminum Material
  • Mounting Hardware Included
  • Includes 1.5 mm Gasket
  • For Small-Block Chevy
See More

Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)

Mechanical Fuel Pump Mounting Pad Cover

from

$24.49
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

Product Features:
  • Cover Hole In Block When Mech. Fuel Pump Is Removed
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.99
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Most Popular 1967 Chevrolet Corvette Smog Parts

Customize your Chevrolet with 1 Smog Parts products like Smog Pumps, all priced under $254.99.

Cardone – Remanufactured Smog Air Pump (Part No.32-104)

Remanufactured Smog Air Pump

from

$254.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.

Product Features:
  • 100% testing of all units guarantees reliable performance every time.
  • High temperature grease extends bearing life, resulting in longer pump life.
  • New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards.
  • Guaranteed fit and function.
  • Meets or exceeds O.E.M performance.
See More

Top Picks for 1967 Chevrolet Corvette Fuel Tanks

Upgrade Chevrolet Corvettes with top-quality Fuel Tanks parts, including 3 OEM and aftermarket selections for your 1967 model.

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Spectra Premium – Fuel Tank (Part No.GM33A)

Fuel Tank

from

$316.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Lock ring included with each tank to reduce installation time and to ensure a complete repair
  • Made with corrosion resistant, OE approved, Ni Terne steel for durability
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation
See More

KAI – Fuel Tank (Part No.FTK010232)

Fuel Tank

from

$265.99
New Platinum Pro Fuel Tank 20.5 Gallon

Product Features:
  • 20.5 Gallon, With Lock Rings
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

In-Demand Fuel Rails for 1967 Chevrolet Corvettes

Select from 1 premium Fuel Rails parts for your 1967 Chevrolet Corvette.

Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)

Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block

from

$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:
  • Black AnodizedFinish
  • High Capacity Fuel Rails
  • For Use W/ Pro-Flo XT Manifold #7137
  • -6 AN Inlet / Outlet
  • Made In The USA
See More

Most Sold 1967 Chevrolet Corvette Exhaust Gas Recirculation (EGR) Parts

Explore our best-selling Chevrolet parts for the 1967 Corvette among 1 OEM and aftermarket options starting from $83.99.

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Top-Rated Fuel and Emissions Systems Brands For Your 1967 Chevrolet Corvette

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 1967 Chevrolet Corvettes. Below you’ll find some of our best rated Fuel and Emissions Systems from Mr. Gasket and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 1967 Corvette start at just $8.49 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Mr. Gasket 1967 Chevrolet Corvette Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1967 Chevrolet Corvette, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Mr. Gasket ticks all of those boxes. We offer a wide selection of Mr. Gasket Fuel and Emissions Systems, specifically designed for the 1967 Chevrolet Corvette. With over 2 Mr. Gasket brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.99, with an average price of just $38.99. Plus, with over 39 customer reviews and an average rating of 4 stars, you can trust that our Mr. Gasket Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Electric Fuel Pump
from
$64.99

(37)

Electric Fuel Pump

“It works as advertised.”

Fuel Pump Block-Off Plate
from
$12.99

(2)

Fuel Pump Block-Off Plate

“This is a block off plate for Ford motors. FE series, 385 series, my dad’s 390, my 351m and my 460 use this shape.”

Popular Dorman 1967 Chevrolet Corvette Fuel and Emissions Systems

Dorman auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 1967 Chevrolet Corvette owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1967 Corvette, Advance Auto Parts carries a full inventory of 2 Dorman Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dorman Fuel and Emissions Systems range from $8.49 to $15.29, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Air Check Valve
from
$8.49
This product is not rated

Air Check Valve

“”

Fuel Pump Push Rod
from
$15.29

(1)

Fuel Pump Push Rod

“great”

FAQs for 1967 Chevrolet Corvette Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1967 Chevrolet Corvettes?

Out of 24 Fuel and Emissions Systems that fit 1967 Chevrolet Corvettes, the following parts are the top sellers:

What’s the price range for 1967 Chevrolet Corvette Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1967 Chevrolet Corvette start at $8.49 and go up to $316.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1967 Chevrolet Corvette?

The average price for Fuel and Emissions Systems for the 1967 Chevrolet Corvette is $102.83. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Corvette model years?

Yes, we currently carry Fuel and Emissions Systems for 70 model years of Chevrolet Corvettes between 1953 and 2025. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Fuel and Emissions Systems for my 1967 Chevrolet Corvette?

The cheapest 1967 Chevrolet Corvette Fuel and Emissions Systems we carry in stock are:

What types of Fuel and Emissions Systems do you sell for my 1967 Chevrolet Corvette?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1967 Chevrolet Corvette:

Can I get help with 1967 Chevrolet Corvette Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet Corvette Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.