1967 Chevrolet Chevelle Engine Parts

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 1967 Chevelle. Advance Auto Parts has popular Chevelle parts like Engine Timing Parts, Engine Gaskets and Seals, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other Chevelle model years including 1966, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975 and more. Select a category of 1967 Chevrolet Chevelle Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1967 Chevrolet Chevelle Engine Parts Categories

Valve Covers

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Cylinder Head Gaskets

Engine Camshaft Bolts

Engine Oil Pump Pickup Tube and Screens

Rubber Freeze Plugs

Engine Dress Up Kits

Crankshaft Pulleys

Timing Cover Repair Sleeves

Valve Cover Load Spreaders

Main Bearing Repair Sleeves

Engine Valve Stem Seals

Piston and Liners

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Camshaft and Lifter Kits

Oil Pump Kits

Standard Piston Rings

Lower Gasket Sets

Timing Chains

Engine Valve Springs

Freeze Plug – Block Kits

Heat Riser Gaskets

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Camshaft Plugs

Rocker Arm Nuts

Engine Timing Tapes

Standard Single Pistons

Oil Pump Screens

Timing Crank Gears

Expansion Plugs

Camshaft Thrust Plate and Bearings

Camshaft Followers

Rocker Arm Bolts

Engine Oil Pump Cover Gaskets

Fuel Pump Gaskets

Engine Cylinder Head Plugs

Engine Oil Pump Bushing

Engine Valve Locks

Camshaft Thrust Buttons

Engine Rocker Arm Balls

Engine Valve Seats

Remanufactured Engines

Cylinder Heads

Engine Valve Spring Seat

Engine Timing Cover Bolt Sets

Engine Oil Deep Sump Kits

Engine Oil Pump Primers

Engine Assembly Lube

Camshaft Lubes

Engine Camshaft Bushings

Engine Bolt Kits

Engine Oil Pump Guide Bushings

Engine Oil Pump Screen Mounting Kit

Valve Train Set Up Spring Set

Essential Engine Parts for 1967 Chevrolet Chevelles

from

$246.99

Quick Button Aluminum Two-Piece Timing Cover for Most Timing Chain Systems (Excluding Quick Adjust). Includes Fully Rollerized Endplay Adjustable Cam Button. A Pefect Compliment to Your Hex-A-Just Timing Set for Easy Access Camshaft Timing Adjustments.

Product Features:

QUICK BUTTON Aluminum Two-Piece Timing Cover for Most Timing Chain Systems (Excluding QUICK ADJUST)
Includes Fully Rollerized Endplay Adjustable Cam Button
A Perfect Complement to Your HEX-A-JUST Timing Set for Easy Access Camshaft Timing Adjustments.

from

$17.99

The plugs in this engine expansion plug kit are designed to match the original parts on specified vehicles. Made of quality materials, this kit components are engineered for reliable performance and durability.

Product Features:

Direct replacement – the components in this engine expansion plug kit are designed to match the original plugs on specified years, makes and models
Ideal solution – this kit is a reliable replacement for original plugs that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Retro-fit performance
High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
Eliminates frequent lash adjustments
Significant friction reduction substantially increases horsepower and fuel economy
Delivers quieter engine operation
Application-specific design for perfect fit and correct operation

from

$6.99

Melling always suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Melling offers an oil pump screen mounting kit for the 10552ST and 10555ST series high performance pumps. The oil pump screen mounting kit contains everything needed for a fast, easy and quality screen installation including the tool and hardware needed to complete the installation.

from

$29.99

Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Cast with FM132 Eutectic proprietary alloy
Performance & dependability of original equipment pistons
High quality aluminum
Controlled casting & machining provides reliability, durability & long life
Up-tilt ring grooves improve piston to ring sealing
Provides great blow-by control

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$39.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

from

$479.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Product Features:

For simplicity, any Super Lock fits any COMP Cams 10° retainer – just choose the correct lock for you valve size and application
Super Locks are recommended in all race applications

from

$14.99

Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.

Product Features:

Heat Treated Steel Bearing Race Material
Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
Prevents Wear On Engine Block
Can be Used to Repair a Damaged Engine Block Thrust Surface.

from

$6.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 3
180,000 PSI
.75″ Underhead Length

from

$127.99

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids. A typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:

Gasket bore – 4.035 inch: Compressed thickness – .040 inch
Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
Optimized sealing embossments seals extreme cylinder pressure
Provides excellent stability and reduces cylinder bore distortion.
Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
For high-performance street, drag race and oval track use

from

$37.99

Lightweight Aluminum Construction. Features Helical Tooth Form For Quiet Operation, And Precision Machined Bore For True Fit.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
Helical tooth form for quiet operation and precision machined bore for true fit
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$6.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$42.99

Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.

Product Features:

Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
Components are manufactured from high quality materials for durable wear
Components are precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$12.99

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

from

$8.49

Installs using stock timing cover bolts. Chrome plated steel is a much better compliment to a chromed timing cover. Has markings from 14 degrees before top dead center (BTDC) to 8 degrees after top dead center (ATDC).

Product Features:

Bolts on with existing timing cover bolts
Chrome plated steel is a much better compliment for chrome timing covers
Markings for 14 degrees BTDC to 8 degrees ATDC

from

$191.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling
Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling

from

$24.99

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$2.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$13.99

Spectre’s Chevrolet dipstick is designed to fit 1955 – 1979 265 – 400 short block engines. The housing and handle are triple chrome-plated steel, and the dipstick features a gold iridite finish for clear accurate oil level readings. This dipstick is made to meet OEM specifications for form, fit and function and feature an adjustable bracket for easy installation.

Product Features:

Fits 1955 – 1979 Chevy short block engine
Designed to meet OEM specifications
Gold iridite dipstick
Chrome plated housing and handle
Dipstick is easy to read for accurate oil level readings

from

$57.99

This Mr. Gasket Rear Main Seal is made from Viton&reg: Rubber. This style of rubber can handle high temperature like silicone rubber, but with superior abrasion resistance. It’s durability and design make it recommended for applications that have high engine vacuum, like racing engines that utilize external vacuum pumps for crankcase evacuation.

Product Features:

Repairs That Leaky Rear Main Sail
Viton&reg: Rubber Offers Both Abrasion Resistance & High Temperature Tolerance
Upgrade for Rope Seal Equipped Cars or Silicone Rubber Main Seals

from

$270.99

These High Energy Die Cast Aluminum Roller Rocker Arms for Chevy V8 396-454 applications are perfect for street and moderate race use. With a 7/16″ stud diameter and 1.7 ratio, the die cast, larger-than-stock body of the rocker arms is made of aluminum for superior strength with light overall weight. High Energy Die Cast Aluminum Roller Rocker Arms from COMP Cams are an affordable option that feature a die cast, aluminum body with a needle bearing fulcrum and roller tip. Designed to be stiffer and more durable, these cost effective rocker arms are capable of providing added valve lift while withstanding the rigors of a performance application. Their specially engineered fulcrum and roller tip create far less friction than sliding factory models to lower oil temperatures, thus improving both response and horsepower. Snap rings are used to hold the trunion and bearings locked in place.

Product Features:

Cost effective aluminum construction provides superior strength to weight ratio
Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
Durable design increases valve lift while withstanding the rigors of moderate race use
Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.

from

$182.99

Billet Crank Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Sprockets Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$24.99

Product Features:

2.19 in.
Ductile Iron Material
Intake
Sold Individually
Made In The USA

from

$42.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
Application specific design to ensure a perfect fit and premium seal
Premium quality parts you can trust
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted

from

$60.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$92.99

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Upgrade your 1967 Chevrolet Chevelle with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1967 Chevrolet Chevelle, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Chevelle functioning at its best. At Advance Auto Parts, we offer a wide selection of 712 Engine Parts for the 1967 Chevrolet Chevelle, designed to meet your needs without breaking the bank. From Engine Timing Part replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1967 Chevrolet Chevelle at great prices. Our Engine Parts inventory for this model ranges from just $0.30 to $9,081.99, with an average price of $349.41. Our 712 Engine Parts in stock come from 29 trusted brands, so you’re sure to find the right part for your 1967 Chevrolet Chevelle without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1967 Chevrolet Chevelle, we stock popular OEM and aftermarket Engine Parts from top names like Edelbrock, Melling, Dorman, and more. Edelbrock Engine Parts start at just $39.99 and boast an impressive 4.4 stars average rating from customers. Melling and Dorman also bring quality to the table, with Engine Parts available starting at $2.99, and at an average 4.3 stars rating. With 2,836 customer reviews and counting, our 1967 Chevrolet Chevelle Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1967 Chevrolet Chevelle is always ready to roll. We’re committed to providing you with everything you need to keep your Chevelle in top shape, all in one place. Start shopping confidently below for your 1967 Chevrolet Chevelle!

Best-Selling Engine Timing Parts for 1967 Chevrolet Chevelles

Enhance the driving experience in your Chevrolet with 66 quality Engine Timing Part components, starting at $5.99.

show more show less

from

$18.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$15.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$39.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
50 State Street Legal
Not for OEM Hydraulic Roller-Lifter Camshaft Eng.

from

$45.49

Mr. Gasket Timing Cover Kit is the finishing touch to dressing up your engine. This kit is for use with original equipment style timing chains only. Double roller type chains or gear drives require checking for adequate clearance. This kit includes everything you need, including the timing cover, bolts, front oil pan seal, front seal and water pump gaskets.

Product Features:

Fits Chevy Small Block 1955-1995
For Use With OEM Style Timing Chain Only
Chrome Plated Steel

from

$66.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets
Not for OEM Hydraulic Roller-Lifter Camshaft Eng.

from

$5.99

Spectre’s Timing Tab Adjustable Small Block Chevy is a universal timing tab that has an adjustable pointer for accurate readings and works with any size harmonic balancer. Featuring triple chrome plated steel construction, the timing tab fits small block Chevrolet 265-400.

Product Features:

Chrome plated
Steel construction
For any size harmonic balancer
Designed to fit Chevy small block engines

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$78.99

Product Features:

Solid Bushing Chain Resists Stretching
For Use with Stock or Edelbrock Camshafts
Stressproof Steel Crank Gears
3 Keyway Setting Points To Ensure Accurate Timing
True Bearing Surface Rolls with the Sprockets

from

$25.99

Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:

6 3¿4″ diameter
6 3┐4″ diameter
305, 350 cu. in. 1969-93
Increased Performance
Set Valve Lash At Proper Time

from

$24.99

Street Performance 3/8″ Pitch Double Roller Replacement True Roller Chain. Seamless 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life. USA Made.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$8.49

Bolts on with existing timing cover bolts
Chrome plated steel is a much better compliment for chrome timing covers
Markings for 14 degrees BTDC to 8 degrees ATDC

from

$34.99

Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for

Product Features:

Stamped Steel Material
Comes W/ Front Crankshaft Seal Installed
W/ Welded Reinforcement Plate
Chrome Finish
Ideal For Preventing Camshaft Walk When Used W/ Thrust Button

from

$31.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S392T Engine Timing Camshaft Sprocket (1 EA), S393 Engine Timing Crankshaft Sprocket (1 EA), C501 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly

from

$19.99

ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant.

Product Features:

Made From Black Oxide Finished 8740 Chrome Moly
Nominally Rated At 170,000 Psi Tensile Strength
Super Tough Bolts
Compact 12 Point Fasteners

from

$16.49

If you are changing your camshaft or replacing the timing set, make sure to replace this seal at the same time! Metal with Nitrile rubber seal.

Product Features:

Nitrile Rubber And High Density Cork
Will Not Shrink Or Stick

from

$20.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$72.99

High Performance 3/8″ Pitch Double Roller Replacement TRUE Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

High Energy 192/200 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$635.99

High Energy 192/200 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

Magnum/Oval Track 244/244 Hydraulic Flat Cam SK-Kit Chevrolet Big Block 396-454

from

$632.99

Magnum/Oval Track 244/244 Hydraulic Flat Cam SK-Kit Chevrolet Big Block 396-454

High Energy 218/218 Hydraulic Flat Cam SK-Kit for Chevrolet Big Block 396-454

from

$614.99

High Energy 218/218 Hydraulic Flat Cam SK-Kit for Chevrolet Big Block 396-454

Magnum/Drag Race 244/244 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$589.99

Magnum/Drag Race 244/244 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

Xtreme Energy 230/236 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$589.99

Xtreme Energy 230/236 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

Magnum 224/224 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$537.99

Magnum 224/224 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

Xtreme Energy 206/212 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

from

$537.99

Xtreme Energy 206/212 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block

Most Popular 1967 Chevrolet Chevelle Engine Gaskets and Seals

Customize your Chevrolet with 46 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Timing Cover Gasket Sets, all priced under $445.99.

show more show less

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$2.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$47.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier for durability, precise alignment and fit
SUPERIOR SEAL – Proprietary molded rubber design helps to eliminate leak paths, especially in problem corner areas
EASIER TO INSTALL – One-piece construction is easier to install than multi-piece assemblies and helps reduce potential for installation errors
INSTALLATION AID – SnapUps aid in holding the gasket in place for easy installation and allow for quick bolt tightening
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$3.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$19.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$22.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$15.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to help ensure a consistent and long-life seal
PRECISE DESIGN – Engineered to work with the embossed cover and pan flanges
PREVENTS OVERTIGHTENING – Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$22.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$44.99

Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are an extra thick .312 inch which can help with valvetrain clearance.

Product Features:

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
An extra thick .312″ which can help with valvetrain clearance

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$47.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE – Features molded rubber over a rigid carrier which resists high heat
SUPERIOR SEAL – Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL – Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$43.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$78.99

Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$62.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$16.99

Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$37.99

Product Features:

Valve Cover Gasket

from

$43.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.brbrThese gaskets are .312 inch thick. That’s substantially thicker than stock which can allow for additional valve train clearance. brbrFits Chevrolet 262,265,267,283,307,327,350,400 Gen I Small Block with Perimeter Bolt Valve Covers.

Product Features:

Provides Excellent Flange Sealing And Durability
For High-Performance Street, Drag Race & Oval Track Use

from

$32.49

Manufactured from high-density cork /rubber blend gasket material
A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
For OE replacement, high performance street, drag race and oval track
.187″ thick

from

$2.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$90.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

Top Picks for 1967 Chevrolet Chevelle Valve Cover and Cylinder Heads

Upgrade Chevrolet Chevelles with top-quality Valve Cover and Cylinder Heads parts, including 181 OEM and aftermarket selections for your 1967 model.

show more show less

from

$50.99

Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
Application specific design to ensure a perfect fit and premium seal
Premium quality parts you can trust
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$42.99

Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
Application specific design to ensure a perfect fit and premium seal
Premium quality parts you can trust
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Contains all the parts needed to complete the repair unless otherwise noted

from

$47.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$30.99

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$64.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$1285.00

The Edelbrock #60455 Performer RPM O-Port cylinder head is designed for Big-Block Chevy applications. The Edelbrock #60455 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance

Product Features:

Complete Single For Hydraulic Roller
110cc Combustion Chamber Volume
290cc Intake/110cc Exhaust Runner Volume
2.19 in. Intake/1.88 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$1041.00

Product Features:

Out-of-the-Box Bolt-On Performance
With Straight Plugs
70cc Combustion Chambers Improve Performance
Retain Stock Compression Ratio

from

$936.99

Product Features:

64cc combustion chamber with 200cc intake runner
2.02 in. intake and 1.60 in. exhaust valves
Flat Tappet Camshaft Type
Exhaust And Intake 45 Degree Seat Angle
Sold as one complete head

from

$2.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$3.29

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$18.99

Chrome-plated for beauty and durability, wing bolts make valve cover removal fast & easy. They are precision-engineered and feature extra-long threads to accommodate Mr. Gasket re-usable valve cover gasket & custom valve covers.

Product Features:

Fits Chevy V8
Standard Y Top 1/4 In-20 X 5/8 in L
Chrome Plated Steel
Overall Length: 4.64″
Installed Length: 4.00″
Pack of 4

from

$56.99

The Edelbrock #4449 Signature Series Valve Covers are designed for Chevrolet 262-400 ’59-86 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

Small Block Chevy 262-400 1959-86
Short
Chrome Steel
Set Of Two
Rubber Grommets For Breather

from

$35.99

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Requires no retorquing of the head bolts
Manufactured for the repair environment
Validated for fit, form, and function
Unsurpassed quality you can trust

from

$3.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Complete rocker arm assembly
1 Arm
1 Ball
1 Nut
Utilizes ISO & QS certified manufacturing

from

$31.49

Product Features:

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$117.99

Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$2.49

from

$42.99

Product Features:

DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$2.49

State-of-the-art manufacturing
Exceptional material quality
Exacting tolerances
Heat treated tips
Stock or mild modified replacement
Made in USA

from

$9.99

Spectre’s Valve Cover Spreader Bar Kits are designed to improve the seal between your valve cover and cylinder head. Constructed from high quality heavy gauge steel, the spreader bars help to evenly distribute clamping pressure, preventing leaks. Featuring a triple chrome-plated finish, this kit is designed to fit Chevrolet 265-400 Small Block engines.

Product Features:

Designed for Chevrolet 265-400 Small Block engines
Features a triple chrome-plated finish
Constructed from heavy gauge steel
Engineered to improve valve cover seal

from

$0.65

from

$60.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

In-Demand Engine Mounts for 1967 Chevrolet Chevelles

Select from 11 premium Engine Mounts parts for your 1967 Chevrolet Chevelle, with prices ranging from $13.99 to $321.99.

show more show less

from

$59.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. the popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$13.99

Anchor 2285 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1961-1982
Weight approx: 3 Lbs
Product: Made In The Usa
Height: 1 1/2 Inch / 38 Mm Plate To Bolt Hole
Cradle Width: 2 5/8 Inch / 66.67 Mm
Top Mount Bolt Not Included
Interlock
Part Group: 2285, 2285

from

$154.99

Product Features:

Re-Engineered to Handle High Horsepower
Outlasts Rubber
Virtually Indestructible

from

$281.99

Product Features:

Re-Engineered to Handle High Horsepower
Outlasts Rubber
Virtually Indestructible

from

$321.99

MotorMt

from

$321.99

MotorMt

from

$244.99

Product Features:

Fabricated steel construction- provides a strong and rigid engine mounting foundation
Designed for use with the Holley 302-2 oil pan to provide optimized inner tie rod clearances and U-joint working angles
Brackets maintain the engine/transmission mating plane in the stock SB Chevy location to ease installation when using a GM legacy automatic transmission (TH350, TH400)
Compatible with stock Saginaw or Delphi 600 series power steering boxes (depending on particular accessory drive system used)
Provides ability to use low-mount A/C compressors in most instances
Zinc plated finish- provides corrosion protection
Brackets are bolt-in compatible with Hooker exhaust manifolds, headers, transmission crossmember and exhaust systems for this vehicle application
LS Oil Pan 302-2 can be used with these mounts

from

$97.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$97.99

A true performance application component for cars, trucks, hot rods and racing/competition vehicles – yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.

Product Features:

Gains Both Performance and Longevity
Will Handle Any and All Torque
Out Lasts Rubber

from

$66.99

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management
Early style ‘Short and Wide’ mount – measures 2 5/8″ between ears, 1 3/4″ tall to the center of the pass-through bolt.
Nolathane formulation boasts resistance to oil, grease, ozone and weathering
Designed to work with the original bushing rather than replace it

from

$22.99

Product Features:

Can be used for aftermarket poly mounts or OEM rubber (Rubber Mounts are for GM 4th Gen F-Body)
Class 10.9 for strength
Zinc plated for corrosion resistance
Includes 2 flange head bolts and 2 flange nuts

Most Sold 1967 Chevrolet Chevelle Camshafts

Explore our best-selling Chevrolet parts for the 1967 Chevelle among 183 OEM and aftermarket options starting from $2.99.

show more show less

from

$13.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.49

Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.

Product Features:

Black oxide finished steel
Includes (3) grade 5 bolts & locking plate
Fits Chevrolet Small and Big Block without OE roller cam
Tabs bend up around bolt head to secure

from

$49.99

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$549.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$410.99

Product Features:

Designed for 1500 to 6500 Performance
Maximum Power in High-RPM with Good Low-End Torque
Matched to Edelbrock Performer RPM Intakes
10 to 12 in. of Manifold Vacuum at Idle
More Lift and Duration than Most Street Camshafts
Includes Hydraulic Lifters and Assembly Lube
Dyno Matched/Street Proven Performance
Take The Guesswork Out Of Camshaft Selection

from

$291.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$3.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$72.99

Steel backed micro Babbitt lining material
Used in automotive and high-performance, Babbitt is designed to deform under extreme loads with o damaging other engine parts.
Fatigue life of cam bearings are nearly doubled
Ensures dependable performance and superior service life
Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
Application-specific design for perfect fit and correct operation

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$226.99

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.

Product Features:

HYDRAULIC – Xtreme Energy: Excellent response, good mid-range, noticeable idle.
262/270 Advertised Duration, 218/224 Duration @ .050″, .462″/.469″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$49.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$254.99

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.

Product Features:

HYDRAULIC – Magnum: High performance. Biggest cam with stock converter but better with 2000+ stall. Use lower gears. Mild rough idle.
270/270 Advertised Duration, 224/224 Duration @ .050″, .470″/.470″ Lift, 110 Lobe Separation
Valve spring upgrade required
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$549.99

HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.

Product Features:

HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
288/294 Advertised Duration, 236/242 Duration @ .050″, .520″/.540″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$259.99

HYDRAULIC – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.

Product Features:

HYDRAULIC – Xtreme Energy: Strong torque. Excellent response, heavy towing in 454 with 4.10 gear.
262/270 Advertised Duration, 218/224 Duration @ .050″, .504″/.510″ Lift, 110 Lobe Separation
Valve spring upgrade required
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$30.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$14.99

Heat Treated Steel Bearing Race Material
Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
Prevents Wear On Engine Block
Can be Used to Repair a Damaged Engine Block Thrust Surface.

from

$2.99

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$60.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$1745.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

Xtreme 4x4 210/214 Hydraulic Roller Cam and Lifter Kit for Chevrolet Small Block

from

$1712.00

Xtreme 4×4 210/214 Hydraulic Roller Cam and Lifter Kit for Chevrolet Small Block

Xtreme Energy 230/236 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block

from

$1712.00

Xtreme Energy 230/236 Hydraulic Roller Cam and Lifter Kit Chevrolet Small Block

Top-Rated Engine Parts Brands For Your 1967 Chevrolet Chevelle

Shop for the best-rated brands offering Engine Parts and other products for your 1967 Chevrolet Chevelles. Below you’ll find some of our best rated Engine Parts from Edelbrock, Melling, and Dorman, and more. Engine Parts from these brands that fit a 1967 Chevelle start at just $2.99 and are rated as high as 4.4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Edelbrock 1967 Chevrolet Chevelle Engine Parts

When it comes to maintaining or upgrading your 1967 Chevrolet Chevelle, using quality Engine Parts is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Engine Parts, specifically designed for the 1967 Chevrolet Chevelle. With over 3 Edelbrock brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $39.99, with an average price of just $463.33. Plus, with over 5 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $1285

(2)

RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Roller Cam

“Replaced all 3 of the U joints in the front driveshaft.”

from $39.99

(1)

Performer-Link Adjustable True-Roller Timing Chain Set

“When you search for ls timing chain advance pays to be top ad that pops up. Says in the headline true-roller. Yet the first question is why isn’t it s”

from $64.99

(2)

Sure Seat Valve Springs for Chevy 262-400 V8 1957-95

“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”

Popular Melling 1967 Chevrolet Chevelle Engine Parts

Melling auto parts is one of the highest quality Engine Part brands in the market. Any 1967 Chevrolet Chevelle owner should feel confident when installing genuine Melling parts in their vehicle. To ensure the best fit and performance for your 1967 Chevelle, Advance Auto Parts carries a full inventory of 3 Melling Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Melling Engine Parts range from $21.99 to $43.99, plus, with more than 31 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $23.99

(11)

Stock Replacement Oil Pump Screen

“Fit ad it should”

from $43.99

(13)

Stock Replacement OE Type Oil Pump

“Easy to install”

from $21.99

(7)

Stock Replacement Type Oil Pump Intermediate Shaft

“After checking several sources Advance Auto hadthe best value.”

FAQs for 1967 Chevrolet Chevelle Engine Parts

Which Engine Parts are best-sellers for 1967 Chevrolet Chevelles?

Out of 712 Engine Parts that fit 1967 Chevrolet Chevelles, the following parts are the top sellers:

Engine Valve Lifter (5688698) – $13.99
Engine Push Rod (5687063) – $3.29
Fuel Pump Mounting Gasket (5183812) – $2.49

What’s the price range for 1967 Chevrolet Chevelle Engine Parts?

Engine Part prices for the 1967 Chevrolet Chevelle start at $0.30 and go up to $9,081.99 for the most premium parts.

What’s the average price of a Engine Part for a 1967 Chevrolet Chevelle?

The average price for Engine Parts for the 1967 Chevrolet Chevelle is $349.41. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Chevelle model years?

Yes, we currently carry Engine Parts for 10 model years of Chevrolet Chevelles between 1964 and 1975. Engine Parts are bought most frequently for the following model years: 1975, 1974, 1973, 1972, 1971, 1970, 1969, 1968, and 1966.

What are the cheapest Engine Parts for my 1967 Chevrolet Chevelle?

The cheapest 1967 Chevrolet Chevelle Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694177) – $0.30
Engine Valve Spring Retainer Keeper (19694179) – $0.43
Engine Rocker Arm Ball (19694261) – $0.65
Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each) (22146590) – $1.79
Steel Cup Expansion Plug 1-3/4 In., Height 0.430 (3492281) – $1.99

What are the top-rated Engine Parts that fit the 1967 Chevrolet Chevelle?

Out of 2,836 reviews by customers, our 1967 Chevrolet Chevelle Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1967 Chevrolet Chevelle and their top-rated products:

Engine Gaskets and Seals
- Engine Valve Cover Gasket Set (5184703) – $26.99
- Engine Valve Stem Oil Seal Set (5785375) – $22.99
- Engine Timing Cover Gasket Set (5783445) – $26.99
Valve Cover and Cylinder Heads
- Engine Valve Cover Gasket Set (5184703) – $26.99
- Engine Valve Stem Oil Seal Set (5785375) – $22.99
- Engine Timing Cover Gasket Set (5783445) – $26.99
Engine Kits
- Engine Valve Cover Gasket Set (5184703) – $26.99
- Engine Valve Stem Oil Seal Set (5785375) – $22.99
- Engine Timing Cover Gasket Set (5783445) – $26.99

What types of Engine Parts do you sell for my 1967 Chevrolet Chevelle?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 1967 Chevrolet Chevelle:

Can I get help with 1967 Chevrolet Chevelle Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Chevelle Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Chevelle Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1967 Chevrolet Chevelle Engine Parts

Cloyes Performance – Engine Timing Cover (Part No.9-231)

Dorman – Gm Brass Expansion Plug Kit, 15 Expansion Plugs, 5 Pipe Plugs (Part No.567-001)

Sealed Power – Engine Valve Lifter (Part No.AT-992)

Melling Select Performance – Oil Pump Screen Mounting Kit (Part No.M-55085)

Sealed Power – Engine Piston Set (Part No.1107NP 60)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Dayco – TIMING CHAIN KIT (Part No.KTC1425)

Competition Cams – Super Valve Locks, 11/32" 1 St (Part No.611-16)

Cloyes Performance – Engine Camshaft Thrust Washer (Part No.9-203)

ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)

Mr. Gasket – Mls Head Gasket (Part No.3128G)

Cloyes Gear – Engine Timing Camshaft Gear (Part No.2524)

Carquest Premium – Engine Oil Filler Cap: Push Fit, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10072)

Melling – Stock Replacement Type Oil Pump Repair Kit (Part No.K-77)

Melling Select Performance – Valve Train Set Up Spring (Part No.VTSS100)

Mr. Gasket – Timing Tab (Part No.4592)

Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)

Melling – Stock Replacement Oil Pump Screen (Part No.305S)

Sealed Power – Engine Push Rod (Part No.RP-3254)

Spectre – Dipstick; Oil Pan (Part No.4255)

Mr. Gasket – Rear Main Seal Gasket (Part No.1971)

Competition Cams – Rocker Arms, Die Cast Alum Big Block Chevy 1.7 1 St (Part No.17021-16)

Cloyes Performance – High Performance Timing Set (Part No.9-3110-5)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

Edelbrock – Valve Seat for B/B Chevy heads with 2.19" Valves (Part No.9716)

Felpro – Engine Cylinder Head Gasket Set (Part No.HS 7733 SH-2)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 8006 PT-1)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 8180 PT-5)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

National – Multi-Purpose Seal (Part No.3945)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7802)

Mr. Gasket – Timing Cover (Part No.4590)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7800)

Spectre – Timing Tab Adjustable Bb Chevy (Part No.4237)

National – Engine Harmonic Balancer Kit (Part No.5000)

Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7810)

Mr. Gasket – Precision Timing Tape (Part No.1588)

Cloyes Performance – High Performance Timing Chain (Part No.9-147)

Mr. Gasket – Timing Tab (Part No.4592)

Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)

Cloyes Gear – Engine Timing Set (Part No.C-3011K)

ARP Auto Racing – For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly (Part No.200-1501)

Mr. Gasket – Timing Cover Seal (Part No.18)

Cloyes Performance – High Performance Timing Chain (Part No.9-146)

Cloyes Performance – High Performance Timing Chain (Part No.9-135)

Competition Cams – High Energy 192/200 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block (Part No.SK12-300-4)

Competition Cams – Magnum/Oval Track 244/244 Hydraulic Flat Cam SK-Kit Chevrolet Big Block 396-454 (Part No.SK11-213-3)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam SK-Kit for Chevrolet Big Block 396-454 (Part No.SK11-205-3)

Competition Cams – Magnum/Drag Race 244/244 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block (Part No.SK12-213-3)

Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block (Part No.SK12-246-3)

Competition Cams – Magnum 224/224 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block (Part No.SK12-211-2)

Competition Cams – Xtreme Energy 206/212 Hydraulic Flat Cam SK-Kit for Chevrolet Small Block (Part No.SK12-230-2)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 12869 R)

Felpro – Fuel Pump Mounting Gasket (Part No.5182)

Felpro – Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included (Part No.OS 34509 T)

Felpro – Exhaust Pipe Flange Gasket (Part No.60117)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 30055 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50265 C)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 5124-1)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45060)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 10058)

Felpro – VALVE COVER GASKET SET (Part No.VS 13173-1)

Felpro – TIMING COVER GASKET SET WITH REPAIR SLEEVE (Part No.TCS 45165)

Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 30061 C-1)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5861)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 12869 AC)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 12869 T)

Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 5197 C-2)

Felpro – PermaTorque Engine Gasket Set (Part No.FS 7733 PT-2)

Felpro – Engine Oil Pan Gasket Set – PermaDryPlus rigid carrier, Oil Pan SnapUps Included (Part No.OS 30061 T)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)

Mr. Gasket – Valve Cover Gasket Set (Part No.179)

Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5860)

Felpro – Exhaust Pipe Flange Gasket (Part No.9097)

Felpro – PermaTorque Engine Gasket Set (Part No.FS 8180 PT-9)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 7733 PT-2)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Felpro – Engine Cylinder Head Gasket Set (Part No.HS 7733 SH-2)