Name: Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Brand: Schrader
SKU: 33700
Price: 51.99 USD

from

$51.99

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$41.99

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
100% ID clone-able with no relearn required
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$109.99

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

Product Features:

OE Replacement Direct-Fit TPMS Sensor 433MHz with Metal valve (clamp-in)
Match OE Sensors in function, design and quality.
No programming required. Quick installation with only a relearn process needed.
Just install sensor and relearn the vehicle.
Have WAL technology for locating tire positon.
Flexible valve angle 0 to 36 degrees.
For specific models from Alfa Romeo, Audi, Bentley, BMW, Ferrari, Maserati, Maybach, Mercedes-Benz, Porsche, VW

from

$64.99

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
The bolt stem has a dacromet coating to meet O.E.M. standards.
For use with steel or aluminum wheels with a ball-shaped seat.

from

$74.99

Protecting the world’s finest wheels and tires from theft since 1964. McGard manufactures wheel locks in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal.

Product Features:

For use on “Tuner” wheels or wheels with very small lug nut holes.
User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
For aluminum wheels only.

from

$110.31

Wheel Lock Set

from

$8.31

Wheel Stud

from

$12.43

Wheel Stud

from

$9.86

Wheel Stud

from

$18.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$13.65

FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.

Product Features:

Original Equipment Quality
Maintenance free
Premium modified bearing steel

from

$17.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$22.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$137.85

Application-Specific Engineering Design to ensure the correct fit, function and high performance of the wheel bearing. BCA supplies premium replacement bearings that meet or exceed the OE specifications. Premium Quality Materials are used for forged steel rings, seals, precision cages, rolling elements and premium grease, to ensure that our customers receive a robust, durable product. Seals are customized for each BCA hub based on application-specific materials and design requirements to minimize the chance of contamination and maximize bearing life. Precision Cage on BCA bearings are designed to keep the rolling elements of the bearing spaced correctly. The cages undergo design verification and production validation testing to ensure high quality. Pre-Lubrication of all BCA wheel bearings with premium grease for your convenience. This is a major advantage so you do not have to worry about grease or seal application.

Product Features:

For wheel bearings, BCA utilizes Forged Steel in the inner and outer rings that meets our stringent steel quality specifications to optimize bearing life.
For taper bearings, BCA utilizes Case Carburized Steel for heavy duty shock loads and longer life.

from

$47.99

WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:

Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
Engineered, manufactured, and tested to meet or exceed OE specifications
Integrated seal design improves contamination resistance for a longer bearing life
High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
Manufactured from high quality steel to maximize durability under even the harshest driving conditions
Brand may vary by location

from

$7321.99

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$11.49

Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:

Four Metal Valve Stems
Press-in interchangeable metal valve stem
Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
Press release valve design allows easy installation without a tool for sensor head fitting
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$462.99

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$6.99

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$8.29

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$8.99

Our Wheel Lug Nuts are designed and constructed to strict engineering quality standards. All of or Wheel Lug Nuts are manufactured with high corrosion resistance to combat rust in any environment.

Product Features:

Wheel Nut Chrome Standard M14-1.50, Hex 21mm, Length 16.36mm
Wheel Nut Chrome Standard M14-1.50
Our Wheel Lug Nuts are designed and constructed to strict engineering quality standards. All of or Wheel Lug Nuts are manufactured with high corrosion resistance to combat rust in any environment.
Direct replacement for a proper fit every time
Available in different quantities and packaging options

from

$10.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$9.32

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$5.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: springless; single-lip
Temperature range: -100°F to 450°F; -73°C to 232°C
Resistant to hydrocarbon/oxygenate blends and provides superior performance
Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
Delivers quality and reliable performance for every type of repair