1966 Porsche 911 Steering and Chassis Parts
More 1966 Porsche 911 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1966 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1966 Porsche 911 Steering and Chassis Parts
Driveworks – Steering Tie Rod End (Part No.DW-ES2096R)
from
$15.29
When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts ensure improved steering response and durability.
See More
Original Equipment – Tie Rod Washer (Part No.M3011412048OEA)
from
$6.89
Tie Rod Washer
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.LM67010)
from
$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Lemfoerder – Lemfoerder Tie Rod Assembly (Part No.M300023265LEM)
from
$81.35
Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.
Product Features:
See More
Product Features:
- Original Equipment Manufacturer
- High grade synthetic socket materials
- Outstanding slide properties
- High ball stud articulation angles.
Original Equipment – Steering Rack Bushin (Part No.M10632241765OEA)
from
$68.82
Steering Rack Bushin
Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010525909LEM)
from
$114.85
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
MOOG – Tie Rod End (Part No.EV801069)
from
$76.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Polished Stud ball provides low socket torque.
- Stud design is optimized to provide ideal stud swing and strength for each application.
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Original Equipment – Sway Bar Bushing (Part No.L105080237OEA)
from
$29.97
The Original Equipment Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration. The Original Equipment Sway Bar Bushing is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
APA/URO Parts – Sway Bar Bushing (Part No.L1050157106APA)
from
$20.70
The APA/URO Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Sebro – Ball Joint Nut / Was (Part No.L2036653398SEB)
from
$28.00
Ball Joint Nut / Was
Sebro – Ball Joint (Part No.L20201155814SEB)
from
$272.08
Every Sebro ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Rein – Power Steering Rack Boot (Part No.BKP0012R)
from
$3.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.
See More
Lemfoerder – Lemfoerder Steering Rack Boot (Part No.M1010184624LEM)
from
$25.09
The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Beck/Arnley – Steering Rack Boot Kit (Part No.103-2734)
from
$31.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot (this is not a split boot)
- Includes boot and two clamps for complete installation.
- Quality construction for durability
- Application specific for this vehicle
Original Equipment – Washer Hose Clamp (Part No.P7142159044OEA)
from
$4.89
Washer Hose Clamp
APA/URO Parts – Torsion Bar Mount (Part No.L2083655790APA)
from
$60.10
Torsion Bar Mount
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1966 Porsche 911 Steering and Chassis Parts Categories
1966 Porsche 911 Steering and Chassis Parts
You count on your 1966 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 14 Steering and Chassis Parts ranging in price from $4.78 to $272.08, you’re sure to find everything you need for your 1966 Porsche 911.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 6 different brands like Driveworks, National, and Sebro. 1966 Porsche 911 Steering and Chassis Parts start as low as $4.78!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 85 extensive product reviews on 1966 Porsche 911 Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1966 Porsche 911 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1966 Porsche 911
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Porsche 911 running right for years to come. In our inventory you’ll find brands like Driveworks, National, Sebro, and even more.
Popular Driveworks Steering and Chassis Parts
You’ll find popular Driveworks brand products across Steering Shafts. All are waiting to get your 1966 Porsche 911 back on the road. Some of the top-rated Driveworks products in these categories are:
FAQs for 1966 Porsche 911 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1966 Porsche 911?
Out of 14 Steering and Chassis Parts for the 1966 Porsche 911, the most popular in our inventory are:
