1966 Pontiac GTO Body Parts
Find Your Specific 1966 Pontiac GTO Body Parts
Below you will find various in-demand Pontiac Body Parts, components and accessories for your 1966 GTO. Advance Auto Parts has popular GTO parts like Vehicle Doors, Bumpers, Bodies and Fender Parts and more. You’ll also find aftermarket and OEM Body Parts for other GTO model years including
1968,
1969,
1970,
1971,
1972,
1973,
2004,
2005,
2006 and more. Select a category of 1966 Pontiac GTO Body Parts below and start saving instantly.
Popular 1966 Pontiac GTO Body Parts Categories
Essential Body Parts for 1966 Pontiac GTOs
Metro Mould – Door Window Seal (Part No.ALP 5500)
from
$75.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Seal for Convertibles. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Quarter Glass Seal (Part No.VS 3-MX)
from
$37.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Roll-Up Quarter Window Seals, for 2-Door Hardtops and Convertibles. Made without steel core. 16-1/2 In. long. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Floor Pan (Part No.GMK403051164R)
from
$113.99
New Goodmark Cab Floor Rear Passenger Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated
Product Features:
See More
Product Features:
- Under Rear Seat 30 Inch X 26 Inch EDP Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Locksmart – Door Lock Kit (Part No.DL15800)
from
$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- All door locks are perfectly matched to the original for precision installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
KAI – Windshield Frame (Part No.GMK4031407661L)
from
$88.99
New Goodmark Driver Side Windshield Side Frame, For 2 Door Sport Coupes And Convertibles
Product Features:
See More
Product Features:
- For 2 Door Sport Coupes And Convertibles
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Flap Set (Part No.SI 8100-100)
from
$41.49
Flap Set
Metro Mould – Cowl Seal (Part No.CS 5)
from
$21.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood to Cowl Seal, with clips. 59-1/8 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Convertible Top Seal (Part No.HD 730)
from
$59.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Header Seal for Convertibles. Made with molded ends and steel core. High-quality molded sponge. 53-3/4 In. Long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Moulding Clip (Part No.WF 205)
from
$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8 In. X 11/16 In. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Stop (Part No.HF 28)
from
$13.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door, Hood and Cowl Bumper. Made with steel core. Held by screw. 15/16 In. high. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Deck Lid Striker (Part No.GMK4030721642)
from
$27.99
New Goodmark Deck Lid Striker, For All Models Except Wagon, Bolts To Striker Support
Product Features:
See More
Product Features:
- For All Models Except Wagon Bolts To Striker Support
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Exterior Door Handle Gasket (Part No.MP 989-D)
from
$48.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Handle Pads. 2-5/8 In. long & 1-1/8 In. long. Set R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Stop (Part No.DB 43)
from
$18.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Snap-in style. Two used per car. 1-1/8 In. high X 15/16 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)
from
$8.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hardtop Moulding (Part No.RR 5001)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Window Seal (Part No.ALP 5000)
from
$26.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Used on lower leading edge of quarter window. Highly detailed, made with steel cores. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Fender Emblem (Part No.GMK4330130642)
from
$106.99
New Goodmark Fender Emblem, GTO 6.5 Liter, 2 Required
Product Features:
See More
Product Features:
- GTO 6.5 Liter 2 Required
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Floor Plug (Part No.SB 48-A)
from
$10.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Floor Plug. For under rear seat. Fits a 1 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Deck Lid Stop Buffer (Part No.SB 34)
from
$28.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Fits lower corner on deck lid. 15/16 In. O.D. 11/16 In. high. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Trunk Crossmember (Part No.GMK403179066)
from
$157.99
New Goodmark Rear Body Cross Bar
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Handle Set (Part No.GMK403244068S)
from
$64.99
New Goodmark Driver And Passenger Side Front Outer Door Handle Kit, Includes Handles, Gaskets, Pushbuttons And Hardware
Product Features:
See More
Product Features:
- Includes Handles Gaskets Pushbuttons And Hardware
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
AmeriSeal – Flexible Flocked Lining All-Rubber Window Glass Run Channel 72" Length (Part No.10868)
from
$16.99
This Ameriseal 72″ Flexible Flocked Lining All-Rubber Window Glass Run Channel 72″ Length For Application- 1965-1975 GM Mid size car is the ideal solution for all your car leakage problems. This window glass run channel is perfectly compatible with the 1979-1993 Ford Mustang Coupe model. It features a strong adhesive to keep your car completely protected from dust and water. It is an ideal solution for your old or worn-out counterpart.
Product Features:
See More
Product Features:
- Flexible model
- Easy installation allows for user-friendly operability
- Durably designed for longevity
- Allows you to keep dust and water away from your car
- Highly dense rubber body built
KAI – Rocker Panel (Part No.GMK403047064R)
from
$148.99
New Goodmark Rocker Panel Passenger Side Outer
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Trunk Floor (Part No.GMK403272568U)
from
$152.99
New Goodmark 1 Piece Trunk Floor, 47 Inches Wide X 34 Inches Long
Product Features:
See More
Product Features:
- 47 Inches Wide X 34 Inches Long
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Door Mirror Mounting Pad (Part No.MP 989-P)
from
$7.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Mirror Pad. 1-1/4 In. wide X 5 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Floor Pan Toe Board (Part No.GMK403037064R)
from
$92.99
New Goodmark Passenger Side T Board Patch
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest – Door Jamb Switch (Part No.S208)
from
$11.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Our parts are 100% tested to verify both mechanical and electrical switching performance.
- Decades of industry leading research and development focused on meeting the technician’s needs
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Metro Mould – Seat Frame Retainer (Part No.SB 62-A)
from
$16.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Seat Bumper. Made with steel core like original. 1-1/2 In. long, 7/16 In. thick. Two used per car. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Upgrade your 1966 Pontiac GTO with Top-Quality Body Parts
When it comes to maintaining or upgrading your 1966 Pontiac GTO, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Body Parts are key to keeping your GTO functioning at its best. At Advance Auto Parts, we offer a wide selection of 62 Body Parts for the 1966 Pontiac GTO, designed to meet your needs without breaking the bank.
From
Vehicle Door
replacements to
Bumpers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1966 Pontiac GTO at great prices.
Our Body Parts inventory for this model
ranges from just $3.49 to $157.99, with
an average price of $54.92.
Our 62 Body Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 1966 Pontiac GTO without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Pontiac GTO, we stock popular OEM and aftermarket Body Parts from top names
like Dorman Locksmart, and more.
Dorman Body Parts
start at just $11.99 and boast an impressive 4 stars average rating from customers.
With 9 customer reviews and counting, our 1966 Pontiac GTO Body Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1966 Pontiac GTO is always ready to roll. We’re committed to providing you with everything you need to keep your GTO in top shape, all in one place.
Start shopping confidently below for your 1966 Pontiac GTO!
Best-Selling Vehicle Doors for 1966 Pontiac GTOs
Enhance the driving experience in your Pontiac with 12 quality Vehicle Door components, starting at $4.49.
Dorman – Help – Door Striker Bolt Kit – 7/16 In.-14 (Part No.38428)
from
$11.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
- Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Locksmart – Door Lock Kit (Part No.DL15800)
from
$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- All door locks are perfectly matched to the original for precision installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
Carquest Premium – Door Jamb Switch (Part No.SAA3759)
from
$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Metro Mould – Door Pillar Post Seal (Part No.CZ 8107)
from
$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Finely crafted and detailed. All of Metro’s Door Lock Pillar Seals are the best available anywhere. They are the best, with molded-in steel cores and superbly detailed outer rubber. Windshield Pillar Post Seals for Convertibles. Two pieces, 25 In. long. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Door Hinge Bolt (Part No.GMK403040264S)
from
$75.99
New Goodmark 24 Piece Door Hinge Bolt Set
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Door Window Seal (Part No.ALP 5500)
from
$75.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Seal for Convertibles. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Exterior Door Handle Gasket (Part No.MP 989-D)
from
$48.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Handle Pads. 2-5/8 In. long & 1-1/8 In. long. Set R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Window Seal (Part No.ALP 5000)
from
$26.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Used on lower leading edge of quarter window. Highly detailed, made with steel cores. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Mirror Mounting Pad (Part No.MP 989-J)
from
$16.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Remote Mirror Pad. 1-1/8 In. wide X 4-1/4 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Mirror Mounting Pad (Part No.MP 989-I)
from
$11.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Left Hand Remote Mirror Pad. 1-1/4 In. wide X 4-1/4 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Mirror Mounting Pad (Part No.MP 989-N)
from
$7.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Standard Mirror Pad. 1-1/8 In. wide X 5-3/8 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Stop (Part No.SB 35)
from
$4.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Most Popular 1966 Pontiac GTO Bumpers
Customize your Pontiac with 9 Bumpers products
like Rear Bumpers,
Front Bumpers, and
Door Bumpers, all
priced under $28.49.
Metro Mould – Deck Lid Stop Buffer (Part No.SB 34)
from
$28.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Fits lower corner on deck lid. 15/16 In. O.D. 11/16 In. high. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Plug (Part No.HF 73)
from
$22.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rocker Panel Plug. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Stop (Part No.DB 43)
from
$18.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Snap-in style. Two used per car. 1-1/8 In. high X 15/16 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Deck Lid Stop Buffer (Part No.HA 2)
from
$17.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Adjustment Bolt and Bumper. 1 In. diameter rubber head. 5/16 In. thick X 18 threads/inch X 1-3/4 In. long bolt. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Seat Frame Retainer (Part No.SB 62-A)
from
$16.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Seat Bumper. Made with steel core like original. 1-1/2 In. long, 7/16 In. thick. Two used per car. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Bumper (Part No.SM 66)
from
$15.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rocker Arm Cover. Neoprene plug. Fits 1 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Stop (Part No.DB 33)
from
$14.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. 1-1/8 In. high X 15/16 In. wide X 7/8 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Deck Lid Stop Buffer (Part No.HA 3)
from
$7.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Adjustment Bolt and Bumper. 1-1/8 In. diameter rubber head. 5/16 In. thick X 18 threads/inch X 2-1/8 In. long bolt. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – License Plate Bracket (Part No.SB 82)
from
$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Fits a 1/4 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Top Picks for 1966 Pontiac GTO Bodies and Fender Parts
Upgrade Pontiac GTOs with top-quality Bodies and Fender Parts parts, including 18 OEM and aftermarket selections for your 1966 model.
Energy Suspension – Body Mount Set (Part No.3.4111R)
from
$148.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Floor Reinforcement (Part No.GMK4030517643)
from
$155.99
New Goodmark Floor Reinforcement Rear Brace Floor Pan Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Mount Set (Part No.3.4111G)
from
$148.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Rocker Panel (Part No.GMK403047064R)
from
$148.99
New Goodmark Rocker Panel Passenger Side Outer
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Rocker Panel (Part No.GMK403047064L)
from
$143.99
New Goodmark Rocker Panel Driver Side Outer
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Reinforcement (Part No.GMK4030517641)
from
$122.99
New Goodmark Floor Reinforcement Front Brace Floor Pan Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Reinforcement (Part No.GMK4030517642)
from
$118.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403051164R)
from
$113.99
New Goodmark Cab Floor Rear Passenger Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated
Product Features:
See More
Product Features:
- Under Rear Seat 30 Inch X 26 Inch EDP Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403051164L)
from
$112.99
New Goodmark Cab Floor Rear Driver Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated
Product Features:
See More
Product Features:
- Under Rear Seat 30 Inch X 26 Inch EDP Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Emblem (Part No.GMK4330130642)
from
$106.99
New Goodmark Fender Emblem, GTO 6.5 Liter, 2 Required
Product Features:
See More
Product Features:
- GTO 6.5 Liter 2 Required
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Hardtop Moulding (Part No.RR 5001)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Floor Pan Toe Board (Part No.GMK403037064R)
from
$92.99
New Goodmark Passenger Side T Board Patch
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan Toe Board (Part No.GMK403037064L)
from
$92.99
New Goodmark Driver Side T Board Patch
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Dash Panel Patch (Part No.GMK403052164)
from
$80.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield
Product Features:
See More
Product Features:
- 57 Inch X 2 Inch Between Dash And Windshield
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Liftgate Seal (Part No.GMK403171466S)
from
$73.99
New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece Driver And Passenger Side
Product Features:
See More
Product Features:
- 2 Piece Driver And Passenger Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Flap Set (Part No.SI 8100-100)
from
$41.49
Flap Set
Metro Mould – Floor Plug (Part No.SB 48-A)
from
$10.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Floor Plug. For under rear seat. Fits a 1 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Moulding Clip (Part No.WF 205)
from
$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8 In. X 11/16 In. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
In-Demand Vehicle Latches and Handles for 1966 Pontiac GTOs
Select from 3 premium Vehicle Latches and Handles parts for your 1966 Pontiac GTO, with prices ranging from $11.29 to $60.99.
KAI – Door Handle Set (Part No.GMK403144066S)
from
$60.99
New Goodmark Driver And Passenger Side Front Outer Door Handle Kit, Includes Handles, Gaskets, Pushbuttons And Hardware
Product Features:
See More
Product Features:
- Includes Handles Gaskets Pushbuttons And Hardware
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Deck Lid Latch (Part No.GMK404270559)
from
$32.99
New Goodmark Trunk Latch
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Exterior Door Handle Gasket (Part No.UM 2005-100)
from
$11.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door Handle Mounting Pads. 4-Piece Set
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Flat Gasket
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Most Sold 1966 Pontiac GTO Vehicle Hoods
Explore our best-selling Pontiac parts for the 1966 GTO among 2 OEM and aftermarket options starting from $11.79.
Metro Mould – Cowl Seal (Part No.CS 4)
from
$18.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Cowl and Hood Seal. 43-1/2 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hood Stop Buffer (Part No.HF 5)
from
$11.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Bumper. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Top-Rated Body Parts Brands For Your 1966 Pontiac GTO
Shop for the best-rated brands offering Body Parts and other products for your 1966 Pontiac GTOs. Below you’ll find some of our best rated Body Parts from Dorman and Locksmart, and more. Body Parts from these brands that fit a 1966 GTO start at just $11.99 and are rated as high as 4 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Dorman 1966 Pontiac GTO Body Parts
When it comes to maintaining or upgrading your 1966 Pontiac GTO, using quality Body Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Body Parts, specifically designed for the 1966 Pontiac GTO. With over 1 Dorman brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99. Plus, with over 5 customer reviews and an average rating of 4 stars, you can trust that our Dorman Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Locksmart 1966 Pontiac GTO Body Parts
Locksmart auto parts is one of the highest quality Body Part brands in the market. Any 1966 Pontiac GTO owner should feel confident when installing genuine Locksmart parts in their vehicle. To ensure the best fit and performance for your 1966 GTO, Advance Auto Parts carries a full inventory of 1 Locksmart Body Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Locksmart Body Parts range up to $24.29, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.
FAQs for 1966 Pontiac GTO Body Parts
Which Body Parts are best-sellers for 1966 Pontiac GTOs?
Out of 62 Body Parts that fit 1966 Pontiac GTOs, the following parts are the top sellers:
- Door Lock Kit (5472962) – $24.29
- Trunk Lock with Key (11871233) – $13.99
- Body Mount Set (22907918) – $148.99
What’s the price range for 1966 Pontiac GTO Body Parts?
Body Part prices for the 1966 Pontiac GTO start at $3.49 and go up to $157.99 for the most premium parts.
What’s the average price of a Body Part for a 1966 Pontiac GTO?
The average price for Body Parts for the 1966 Pontiac GTO is $54.92. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Body Parts for other Pontiac GTO model years?
What are the cheapest Body Parts for my 1966 Pontiac GTO?
The cheapest 1966 Pontiac GTO Body Parts we carry in stock are:
- Moulding Clip (10443071) – $3.49
- Door Stop (10443208) – $4.49
- License Plate Bracket (10442951) – $6.99
- Deck Lid Stop Buffer (10442981) – $7.79
- Door Mirror Mounting Pad (10078642) – $7.99
What types of Body Parts do you sell for my 1966 Pontiac GTO?
As of 2/5/25, these are some of the most in-demand types of Body Parts for a 1966 Pontiac GTO:
Can I get help with 1966 Pontiac GTO Body Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Body Parts and more.
What is your return policy for Pontiac GTO Body Parts?
Advance Auto Parts keeps returns simple. For new Pontiac GTO Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
