1966 Pontiac Grand Prix Wheels and Tires
More 1966 Pontiac Grand Prix Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 1966 Pontiac Grand Prix, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 1966 Pontiac Grand Prix Wheels and Tires
Dorman – Wheel Stud: Serrated, 1/2-20 Thread Size, Right Hand Thread (Sold by each) (Part No.610-134)
from
$4.79
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – M12-1.50 Serrated Wheel Stud – 12.70mm Knurl, 34.5mm Length (Part No.610-324)
from
$2.29
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)
from
$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)
from
$7321.99
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – Wheel Lug Nut: 1/2-20 Thread, Conical 60, Duplex Mag, 1.808" Length, Chrome, 1 Pack (Part No.611-156.1)
from
$3.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Nut Chrome Short Shank Mag 1/2 Inch-20, Hex 13/16 Inch Length 1.455 Inch (Quantity 4) (Part No.711-207)
from
$12.09
Our Wheel Nuts are designed and constructed to strict engineering quality standards. All of our Wheel Nuts are manufactured with high corrosion resistance to combat rust in any environment.
Product Features:
See More
Product Features:
- Wheel nut covers also available
- Easy to install
- Available in different quantities and packaging options
- Chrome wheel nut & lock kits available (where applicable)
Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-34)
from
$6.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Taper Bearing Set (Part No.S-A-6)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.710479)
from
$10.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.8940S)
from
$22.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Gold Chrome Acorn M12-1.50, Hex 3/4 In., Length 1.380 In. (Part No.711-344)
from
$41.89
Our Wheel Nuts and Locks are easy to use and engineered to last . Durably designed with a chrome finish, they blend in with the overall design of your car, offering optimal security and appearance.
Product Features:
See More
Product Features:
- Constructed of high-quality steel
- Resistant to rust, warping, and stripping
- Multiple lock designs available
- Quality-tested to ensure performance and durability
McGard – Chrome Cone Seat Wheel Installation Kit for 5 Lug Vehicles (7/16"-20 Thread Size) (Part No.84532)
from
$124.99
The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
- Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch
National – Multi Purpose Seal (Part No.8705S)
from
$5.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
SKF – Wheel Seal (Part No.K8010333922SKF)
from
$4.95
Wheel Seal
Dorman – Wheel Lug Nut & Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" L, Gunmetal, 16 Nuts/4 Locks/1 Key (Part No.711-335H)
from
$42.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.39" Length, Matte Black, 20 Locks/1 Key (Part No.711-255C)
from
$61.99
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.
Product Features:
See More
Product Features:
- Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
- Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
- Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)
from
$41.99
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- 100% ID clone-able with no relearn required
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
ACDelco – Tire Pressure Monitoring System (TPMS) Sensor (Part No.20925924)
from
$114.99
ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Battery is made to last up to 10 years of normal use
- Designed to communicate perfectly with your GM vehicle’s TPMS Module
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
VDO REDI-Sensor – VDO Rubber Snap-in Stem REDI-Sensor (Part No.SE10001HPR)
from
$49.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.
Product Features:
See More
Product Features:
- Installs right out of the box
- No sensor programing required
- Works with all major TPMS scan tools
- No training required – designed to follow existing OE vehicle relearn procedures
- Faster TPMS scan tool hunt mode
- Reduces SKUs
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Acorn, 1.4" Length, Chrome, 4 Pack (Part No.711-309)
from
$13.29
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.38" Length, Black Chrome, 4 Pack (Part No.711-305A)
from
$8.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: M12-1.50 Thread, Flanged, Cragar SST Mag, 2.25" Length, Chrome (Sold by each) (Part No.611-184)
from
$3.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
National – Cylindrical Bearing (Part No.6408)
from
$21.99
Manufactured with premium-grade steel, National® cylindrical bearings are designed and engineered to meet OE specifications.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Professional – Hub Assembly with Wheel Bearing 91-326724 (Part No.91-326724)
from
$146.99
Carquest Professional hub assemblies are designed by a leading original equipment manufacturer (O.E.M.) and built to meet or exceed OE specifications for a perfect fit and proven performance. Carquest Professional hub assemblies feature bearings and seals that are designed for each specific vehicle application for a more durable repair solution. These hub assemblies are rigorously tested to ensure long-lasting performance that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Manufactured on a semi-automated production line that helps ensure superior quality
- Multiple tests completed to ensure long-lasting performance
- All ABS sensors are tested for proper signal functionality
- Enhanced corrosion resistant wheel studs to reduce rust build-up
- Precision-machined to stringent tolerances provided high quality and longer endurance
- Bearings and seals are constructed and engineered to the requirements of vehicle application
- Roll-form bearing design applies exact preload for increased durability (where applicable)
Dorman – Wheel Bearing and Hub Assembly: Rear, 5 Studs (Part No.951-900)
from
$106.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.
Product Features:
See More
Product Features:
- Complete repair – this assembly includes the wheel hub and application-specific bearing components
- Saves time – eliminates work required to remove individual corroded components
- Reliable fit – precision-engineered to match the dimensions of original equipment
- Trustworthy quality – engineered and tested in the United States
Dorman – Help – Wheel Hub Dust Caps (Part No.13977)
from
$5.99
This wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this dust cap is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
KAI – Wheel Bring Dust Cap (Part No.GMK4043595611P)
from
$34.99
New Goodmark Pair Of Front Wheel Bearing Caps
Product Features:
See More
Product Features:
- Pair
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Spindle Dust Cap 2-3/32 In. Diameter (sold by each) (Part No.618-102)
from
$2.49
This wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing dust cap is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this dust cap is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1966 Pontiac Grand Prix Wheels and Tires Categories
1966 Pontiac Grand Prix Wheels and Tires
You count on your 1966 Pontiac Grand Prix to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 77 Wheels and Tires ranging in price from $2.29 to $361.99, you’re sure to find everything you need for your 1966 Pontiac Grand Prix.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 6 different brands like Dorman, DriveWorks, and Schrader. 1966 Pontiac Grand Prix Wheels and Tires start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 644 extensive product reviews on 1966 Pontiac Grand Prix Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Multi Purpose Seal with 4.4 stars and Wheel Lug Nut: 1/2-20 Thread, Conical 60, Bulge Acorn, 1.375" Length, Chrome, 4 Pack with 4.6 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 1966 Pontiac Grand Prix below to get started!
Top-Rated Wheels and Tires Brands For Your 1966 Pontiac Grand Prix
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Pontiac Grand Prix running right for years to come. In our inventory you’ll find brands like Dorman, DriveWorks, Schrader, and even more.
Popular Driveworks Wheels and Tires
You’ll find popular Driveworks brand products across Wheel Bearings. All are waiting to get your 1966 Pontiac Grand Prix back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Dorman Wheels and Tires
If Dorman are what you’re looking for, our inventory holds plenty. We stock Dorman brand Wheels and Tires for your 1966 Pontiac Grand Prix, and some of our most reviewed Dorman parts include:
from
$38.49
(29)
Wheel Lug Nut & Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.407" L, Chrome, 16 Nuts/4 Locks/1 Key
Custom Wheel Lug Nut and Lock Sets
from
$40.49
(23)
Wheel Lug Nut Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.39" Length, Chrome, 20 Locks/1 Key
Custom Wheel Lug nuts
from
$16.29
(17)
Wheel Lug Nut Lock Set: 1/2-20 Thread, Conical 60, Acorn, 1.425" Length, Chrome, 4 Locks/1 Key
Locking Wheel Lug Nuts
FAQs for 1966 Pontiac Grand Prix Wheels and Tires
What are the most purchased Wheels and Tires for the 1966 Pontiac Grand Prix?
Out of 77 Wheels and Tires for the 1966 Pontiac Grand Prix, the most popular in our inventory are:
from
$2.49
This product is not rated
Wheel Lug Nut: 1/2-20 Thread, Conical 60, Bulge Acorn, 1.38" Length, Chrome (Sold by each)
Custom Wheel Lug nuts
from
$2.49
This product is not rated
Wheel Lug Nut: 1/2-20 Thread, Conical 60, Bulge Open End, 0.83" Length, Chrome (Sold by each)
Custom Wheel Lug nuts
from
$41.99
(69)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Tire Pressure Sensors
What are the top-rated 1966 Pontiac Grand Prix Wheels and Tires?
Top-rated Wheels and Tires for your 1966 Pontiac Grand Prix based on customer reviews/ratings are:
from
$14.29
(20)
Multi Purpose Seal
“Perfect replacement for my vintage Pontiacs. I recommend this particular seal to al of my customers.”
from
$7.99
(16)
Wheel Lug Nut: 1/2-20 Thread, Conical 60, Bulge Acorn, 1.375" Length, Chrome, 4 Pack
“Great robust wheel nuts for my Ford Crown Victoria 2004 sport wheels”
from
$3.99
(16)
Wheel Lug Nut: 1/2-20 Thread, Conical 60, Acorn, 1.382" Length, Chrome, 1 Pack
“1 piece acorn lug nut. Hasn’t messed up; hasn’t had much opportunity to yet. Doubtful there will be any issues.”
