1966 Oldsmobile Toronado Ignition and Tune-Up Products
More 1966 Oldsmobile Toronado Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 1966 Oldsmobile Toronado, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 1966 Oldsmobile Toronado Ignition and Tune-Up Products
MSD Ignition – Wire Set; Super Conductor; 8-cyl. 90f Plug/90f Plug (Part No.31229)
from
$129.99
Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It’s a little more work, but in the end it will be worth it.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap – Boots and Terminals Included
- Incl. Mini-Stripper-Crimper
Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)
from
$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
Carquest – Distributor Cap (Part No.24E1023)
from
$9.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Carquest – Distributor Cap (Part No.24E1027)
from
$15.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
PerTronix – High-Performance Electronic Ignition for Delco 8-Cylinder Engines (Part No.1181)
from
$117.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign
Product Features:
See More
Product Features:
- PerTronix 1181 Ignitor Delco 8 cyl
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
Carquest Premium – Ignition Conversion Kit (Part No.CBA1048)
from
$242.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8126)
from
$39.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8102)
from
$35.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
MSD Ignition – Wire Set; Super Conductor; 8-cyl. Multi-Angle Plug; Socket/HEI (Part No.31199)
from
$129.99
Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Incl. both socket-style and spark plug-style boots and terminals
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; HEI Cap (Part No.31189)
from
$129.99
For engines with late-model type (HEI spark plug top) distributor caps. Multi-angle boots and terminals installed on one end. 90 degree distributor boots and terminals included.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap – Boots and Terminals Included
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [8] 90 Degree Boots/Terminal Ends
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
NGK – OE Series V-Power Nickel Spark Plug: V-Groove Tip Design, TR55 (Part No.3951)
from
$4.99
NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
Product Features:
See More
Product Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
- OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
- V-Groove Tip Design: The unique V-Groove tip design of the TR55 model enhances ignitability and overall engine performance.
- Lower Emissions: The NGK Laser Platinum Spark Plug contributes to lower emissions, supporting a cleaner and more environmentally friendly driving experience.
Motorcraft – Spark Plug (AGSF32FECF4) (Part No.SP-439-A)
from
$7.79
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spa
Product Features:
See More
Product Features:
- Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
- Backed by Motorcraft’s Service Parts Warranty
- Exact fit for Ford, Lincoln and Mercury vehicles
- Resistant to oxidation and arc erosion.
- Multi-rib insulator protects against misfire.
- Service intervals of up to 100,000 miles.
- Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
- Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
- Motorcraft ignition components help prevent false check engine lights.
Carquest – Distributor Rotor (Part No.23A1006)
from
$7.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Carquest Premium – Distributor Rotor (Part No.DAA1004)
from
$6.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
PerTronix – D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister (Part No.D9006)
from
$30.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.
Product Features:
See More
Product Features:
- PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
- These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
Accel – Adj:Vac Adv GM V8 Point Dist (Part No.31034)
from
$54.39
This unit permits a seamless wide range of adjustment to both amount and rate of ignition advance. This unit helps increase horsepower and throttle response. It provides maximum spark advance while preventing detonation or “pinging”. This kit includes an allen wrench for easy adjustment along with instructions.
Product Features:
See More
Product Features:
- Adjustable Vacuum Advance
- Increases Horsepower And Throttle Response
- Includes Allen Wrench For Adjustments
- Instantly Increase Horsepower
- Maximum Possible Spark Advance
- Not Legal For Sale/Use In CA
Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)
from
$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed to meet or exceed OE specifications in form, fit and function
PerTronix – D1101 Flame-Thrower Distributor HEI Oldsmobile V8 Red Cap (Part No.D1101)
from
$328.99
STREET / STRIP HEI distributorsOur HEI distributors are built from the ground up with all new components. We have engineered a special high energy module and coil combination that operates without misfires beyond 7500 RPM. That’s nearly 3000 RPM higher t
Product Features:
See More
Product Features:
- PerTronix D1101 Flame-Thrower Distributor HEI Oldsmobile V8 Red Cap
- New lightweight aluminum alloy housing.
MSD Ignition – Distributor; Oldsmobile V8; Ready-to-Run (Part No.8529)
from
$647.99
Die hard Oldsmobile enthusiasts have been asking about a Ready-to-Run distributor and here it is! Ready-to-Run means just that, drop it in the engine, connect three wires and fire up your olds. Inside the billet aluminum housing there is a high-output inductive ignition module that lights the spark. This module now has a built-in rev limiter to protect your olds from overrev protection damage. A polished steel shaft spins in the center of this module and is guided by a sealed ball bearing for great stability. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engine’s specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The distributor is supplied with the MSD cap, race rotor, wire retainer and gear.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- CARB E.O. Approved
- Does not require an MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
MSD Ignition – Wire Set; Black Super Conductor; 8-cyl. Multi-Angle/HEI; Universal (Part No.31183)
from
$143.99
For engines with late-model type (HEI spark plug top) distributor caps. Multi-angle boots and terminals installed on one end. 90 degree distributor boots and terminals included.
Product Features:
See More
Product Features:
- Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
- Distributor Cap – Boots and Terminals Included
- Includes Mini-Stripper-Crimper For Factory Style Crimps
- Size Includes [8] 90 Degree Boots/Terminal Ends
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Accel – Universal Fit 300+ Race Spark Plug Wire Set (Part No.7040)
from
$176.99
The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.
Product Features:
See More
Product Features:
- 150 Ohms/ft Of Resistance
- 600 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- Custom-fit Universal And Import Coverage
- Pre And Post HEI Vehicles
- Spiral-Wound Copper/Nickel Alloy
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1493)
from
$67.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48780)
from
$56.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
ACDelco – Ignition Capacitor (Part No.D204)
from
$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Carquest – Contact Set (Points) (Part No.A120V)
from
$24.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
- External core made from oriented silicon steel ensures durability and longevity
- Stainless steel spring resists corrosion
Carquest Premium – Ignition Contact Set (Part No.AKA1002)
from
$21.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Ignition Condenser, Capacitance Rating: 0.18-0.23 (Part No.G120A)
from
$20.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- Offering hundreds of high-quality pigtails & sockets for nearly every electrical job
- Utilizing high grade materials to ensure peak conductivity and perfect connections
Carquest – Ignition Contact Set and Condenser Kit, Capacitance Rating: 0.18-0.23 (Part No.A2120)
from
$27.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.
Product Features:
See More
Product Features:
- 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
- Thermoplastic housing withstands heat stress for enhanced durability
- Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
- External core made from oriented silicon steel ensures durability and longevity
- Stainless steel spring resists corrosion
Popular 1966 Oldsmobile Toronado Ignition and Tune-Up Products Categories
1966 Oldsmobile Toronado Ignition and Tune-Up Products
You count on your 1966 Oldsmobile Toronado to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 81 Ignition and Tune-Up Products ranging in price from $3.49 to $647.99, you’re sure to find everything you need for your 1966 Oldsmobile Toronado.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like ACDelco, Autolite, and E3. 1966 Oldsmobile Toronado Ignition and Tune-Up Products start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 202 extensive product reviews on 1966 Oldsmobile Toronado Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and Ignition Coil with 4.5 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 1966 Oldsmobile Toronado below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 1966 Oldsmobile Toronado
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Oldsmobile Toronado running right for years to come. In our inventory you’ll find brands like ACDelco, Autolite, E3, and even more.
Popular Dorman – Help Ignition and Tune-Up Products
You’ll find popular Dorman – Help brand products across Spark Plugs. All are waiting to get your 1966 Oldsmobile Toronado back on the road. Some of the top-rated Dorman – Help products in these categories are:
Top-Rated Accel Ignition and Tune-Up Products
If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Ignition and Tune-Up Products for your 1966 Oldsmobile Toronado, and some of our most reviewed Accel parts include:
from
$63.99
(25)
Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set
Optional Spark Plug Wires
FAQs for 1966 Oldsmobile Toronado Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 1966 Oldsmobile Toronado?
Out of 81 Ignition and Tune-Up Products for the 1966 Oldsmobile Toronado, the most popular in our inventory are:
from
$3.49
(17)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
Spark Plugs
What are the top-rated 1966 Oldsmobile Toronado Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 1966 Oldsmobile Toronado based on customer reviews/ratings are:
from
$49.99
(20)
Blaster 2 Coil: High Performance Ignition Upgrade
“Had one before and blew it up, good easy replacement. MSD makes a good product.”
from
$4.29
(10)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
“I used these plugs on a 400 bb mopar with 64/426 wedge heads .made tho engine run so much better the your standard copper plugs.yes I will buys these ”
