1966 Oldsmobile Dynamic Performance and Racing Products

Below you will find various in-demand Oldsmobile Performance and Racing Products, components and accessories for your 1966 Dynamic. Advance Auto Parts has popular Dynamic parts like Performance Exhaust Products, Performance Engines, Performance Oil Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Dynamic model years including 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965 and more. Select a category of 1966 Oldsmobile Dynamic Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1966 Oldsmobile Dynamic Performance and Racing Products Categories

Performance Oil Filters

Performance Carburetors

Performance Engine Coolant Thermostats

Performance Air Filters

Performance Coils

Performance Distributor Cap and Rotor Kits

Performance Shifters

Performance Distributors

Performance Transmission Dipstick Tubes

Performance Water Outlets

Performance Radiator Caps

Performance Engine Cylinder Head Gaskets

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Engine Timing Sets and Components

Performance Exhaust Manifold Gaskets

Performance Oil Pans

Performance Ignition Kits

Performance Upper Performance Control Arm Bushings

Performance Ignition Parts

Performance Points and Condensers

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Torque Converters

Performance Transmission Rebuild Kits

Essential Performance and Racing Products for 1966 Oldsmobile Dynamics

from

$19.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

from

$306.99

Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.

Product Features:

Base Trims To Custom Fit Floor
NHRA/IHRA Reverse Lockout Meets Requirements
Includes Neutral Safety Switch
Includes Backup Light Switch
Includes Black T-Handle and Cable

from

$20.79

The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:

Ideal For Tight Spaces
Serrations Prevent Loosening
Flange Distributes Pressure
Zinc Plated Bolts
Grade 5 Material
Easy Installation

from

$29.99

Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:

Made from HYPER-Flex Polyurethane
Allows Vehicle to Work At Maximum Efficiency
Easy to Install
Superior Performance and Greater Longevity
Lasts Much Longer Than OEM Rubber End Links

from

$30.99

Product Features:

1.44″x2.44″
Features Embossed Silicone Bead Around The Intake Ports & Water Openings
.060″ Thick
Two Piece Configuration
End Seals Not Included

from

$26.99

Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$55.99

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:

Improved output coil for electronic ignitions
Works w/Blaster Ignition Or MSD 5/6/7 Series
Ballast Resistor Required If Used w/Stock Points Ignition
Alkyd tower w/high dielectric properties lessens carbon tracking

from

$179.99

Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:

Easy Installation
Improved Fuel Economy
Reduced Maintenance
Accurate Timing
Improved Performance
Provides A Simple Conversion
No Moving Parts To Wear Out

from

$95.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$562.99

Torque Converter – Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost performance torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available, Tork Master converters come with a new precision pump drive tube and all are pressure tested and fully balanced. The Tork Master torque converter is not recommended for big block or supercharged applications. New allow steel pump drive tube. Needle thrust bearing when factory equipped. New thrust washer between turbine and cover when required.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer
Washer Between Turbine and Cover

from

$511.99

A B&M transmission in a box! Transform your automatic transmission into a full-tilt B&M performer! This is our ultimate transmission kit – it comes complete with full instructions on how to assemble your transmission to B&M specifications.

Product Features:

High Perf. Friction Materials
Complete Overhaul Gasket Set
Modification Components
Replacement Valves
Replacement Springs
Drain Plug Kit Included

from

$166.99

The B&M Transpak has all the features in the Shift Improver Kit, plus it provides additional driver manual control. Retain full automatic features and standard shift points with selector in Drive.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$523.99

The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore
Electric Choke Installed from Factory
Smooth Secondary Transition
Includes Only Timed Vacuum Port
Includes EGR ; Fuel Vapor Outlet

from

$19.29

Distributor Condenser

from

$716.99

Die hard Oldsmobile enthusiasts have been asking about a Ready-to-Run distributor and here it is! Ready-to-Run means just that, drop it in the engine, connect three wires and fire up your olds. Inside the billet aluminum housing there is a high-output inductive ignition module that lights the spark. This module now has a built-in rev limiter to protect your olds from overrev protection damage. A polished steel shaft spins in the center of this module and is guided by a sealed ball bearing for great stability. Another great benefit of the MSD Ready-to-Run distributor is the mechanical advance. The weights and assembly are fine-blanked from chromoly for absolute precision resulting in smooth timing changes. You can set up a timing curve to match your engine’s specifications easily with the supplied advance springs and bushings plus there is a vacuum advance for economy. The distributor is supplied with the MSD cap, race rotor, wire retainer and gear.

Product Features:

Simple and clean three wire installation
CARB E.O. Approved
Does not require an MSD Ignition Control
Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Mech. advance assem. can be locked out for crank trigger systems
Advance plate and weights are fine blanked from chrome moly steel

from

$32.49

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$167.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$130.99

Product Features:

Head: 4.250″ Bore/0.042″ Thick/9.8cc Vol.
Intake: 1.44″x2.44″ Port/.060″ Thick
Exhaust: 1.95″x1.56″ Port
3/16″ Valve Cover
Multi Piece Configuration

from

$5.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$127.99

What better way to check you oil level by using one of B&M’s transmission fluid dipsticks? The cap screws into the tube and is O-ring sealed, while the base of the tube has a sealing grommet where it goes into the transmission.

Product Features:

Automatic Transmission Dip Stick

from

$31.99

This Spectre OEM replacement air filter is an easy to install performance option for multiple Buick, Cadillac, Chevy, GM, Mercedes, Oldsmobile and Pontiac applications that use a 14 inch by 3 inch round air filter. With its performance synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. This air filter’s sealing edge was engineered to insure a proper air cleaner housing seal for great engine protection.

Product Features:

Replacement for 14 inch by 3 inch round air filter
Fits perfectly in your vehicle’s air box as a replacement for your factory air filter
Engineered for increased flow and greater performance
Fits select Buick, Cadillac, Chevy, GM, Mercedes, Oldsmobile and Pontiac models
Factory pre-oiled and ready to use
Simple installation

from

$53.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:

Indicates Coolant Temperature
Helps to Prevent Injuries from coolant or steam burns
Integrated Coolant Reclamation Valve
Improves Underhood Appearance
Fahrenheit and centigrade readings
Various valve pressures available

from

$54.99

Product Features:

Heavy Duty Cap and Rotor Kit
With Brass Inserts

from

$167.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$42.99

Mr. Gasket Performance Exhaust Gaskets are manufactured from high-temperature composite material. They provides maximum torque retention to eliminate gasket failure. Precision die cut for an excellent fit, but can be trimmed if necessary for modified port applications. For OE replacement, high-performance street, drag race and oval track. Rectangular Ports, 1.55 inch x 1.92 inch.

Product Features:

Manufactured from high-temperature acrylic blend exhaust material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Precision Die Cut For Excellent Fit

from

$17.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

Upgrade your 1966 Oldsmobile Dynamic with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1966 Oldsmobile Dynamic, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Performance and Racing Products are key to keeping your Dynamic functioning at its best. At Advance Auto Parts, we offer a wide selection of 66 Performance and Racing Products for the 1966 Oldsmobile Dynamic, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Engines upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1966 Oldsmobile Dynamic at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $972.99, with an average price of $281.88. Our 66 Performance and Racing Products in stock come from 14 trusted brands, so you’re sure to find the right part for your 1966 Oldsmobile Dynamic without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Oldsmobile Dynamic, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Holley, B & M, and more. K&N Performance and Racing Products start at just $19.99 and boast an impressive 4.8 stars average rating from customers. Holley and B & M also bring quality to the table, with Performance and Racing Products available starting at $371.99, and at an average 4.2 stars rating. With 303 customer reviews and counting, our 1966 Oldsmobile Dynamic Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1966 Oldsmobile Dynamic is always ready to roll. We’re committed to providing you with everything you need to keep your Dynamic in top shape, all in one place. Start shopping confidently below for your 1966 Oldsmobile Dynamic!

Best-Selling Performance Exhaust Products for 1966 Oldsmobile Dynamics

Enhance the driving experience in your Oldsmobile with 2 quality Performance Exhaust Product components, starting at $32.99.

show more show less

from

$42.99

Manufactured from high-temperature acrylic blend exhaust material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Precision Die Cut For Excellent Fit

from

$32.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

Most Popular 1966 Oldsmobile Dynamic Performance Engines

Customize your Oldsmobile with 12 Performance Engines products like Performance Engine Intake Manifold Gaskets, Performance Engine Cylinder Head Gaskets, and Performance Water Outlets, all priced under $972.99.

show more show less

from

$562.99

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer
Washer Between Turbine and Cover

from

$32.49

Opens At 195 Degrees
Designed to Resist Large Variations of Coolant Pressure at High RPM
Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
For High Performance Street, Drag Race, and Oval Track
Copper & Brass Construction – Resists Corrosion
High Flow

from

$26.99

Fits Oldsmobile 330, 350, 425 and 455 engines
Chrome plated
Bolts included
Designed for OEM fit
Easy to install
O-ring/gasket not included

from

$30.99

Product Features:

1.44″x2.44″
Features Embossed Silicone Bead Around The Intake Ports & Water Openings
.060″ Thick
Two Piece Configuration
End Seals Not Included

from

$89.99

Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.230 inch, Compressed thickness 0.038 inch

Product Features:

Five layer (graphite core/perforated steel outer layers) composite construction
Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
Provides excellent stability, compressibility and high temperature endurance
Coated with high temperature silicone to ensure sealing of engine fluids
Will not brinell (indent) aluminum cylinder heads
For high performance street, drag race and oval track use
Compatible w/High Octane Fuel
Compatible With Exotic Fuel

from

$337.99

Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$972.99

HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine
Dual Pattern Drive Lugs
New Turbine Hub
New Springs/Rollers In Stator

from

$921.99

HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$562.99

HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2400 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$130.99

Product Features:

Head: 4.250″ Bore/0.042″ Thick/9.8cc Vol.
Intake: 1.44″x2.44″ Port/.060″ Thick
Exhaust: 1.95″x1.56″ Port
3/16″ Valve Cover
Multi Piece Configuration

Endure-X Solid Roller Lifter for Oldsmobile 350-455

from

$102.99

Endure-X Solid Roller Lifter for Oldsmobile 350-455

from

$85.99

ENGINE TIMING SET

Top Picks for 1966 Oldsmobile Dynamic Performance Oil Filters

Upgrade Oldsmobile Dynamics with top-quality Performance Oil Filters parts, including 1 OEM and aftermarket selections for your 1966 model.

show more show less

from

$19.99

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

In-Demand Performance Fuel Systems for 1966 Oldsmobile Dynamics

Select from 8 premium Performance Fuel Systems parts for your 1966 Oldsmobile Dynamic, with prices ranging from $394.99 to $819.99.

show more show less

from

$509.99

Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:

Vibratory Polished For Good Looks

from

$394.99

The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Manual Choke
4 Barrel Count
Square Bore
Smooth Secondary Transition
Both Timed and Full Vacuum Ports
Includes PCV Outlet

from

$716.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:

Vibratory Polished For Good Looks
Optimized Street Calibration That Works Out Of The Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
No Unnecessary Trips Back To The Parts Store
Limited Lifetime Warranty
100% Wet Flow Tested By Holley Technicians
Arrives Ready To Run

from

$437.99

The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

from

$819.99

The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.

Product Features:

Gold Dichromate Finish For Extreme Off Road Environments
Single Feed Fuel Inlet For Ease Of Installation
Optimized Off-Road Calibration That Works Out-Of-The-Box
Factory Preset Electric Choke For Easy Startups
Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
One Piece Off-Road Vent Tube Eliminates Fuel Spillover
Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
Limited Lifetime Warranty Defects In Material/Workmanship

from

$523.99

Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
Electric Choke
4 Barrel Count
Square Bore
Electric Choke Installed from Factory
Smooth Secondary Transition
Includes Only Timed Vacuum Port
Includes EGR ; Fuel Vapor Outlet

from

$407.99

Product Features:

Satin Finish
4 Barrel
Annular Booster Type
Manual Choke Type
750 cfm Maximum Flow Rating

Most Sold 1966 Oldsmobile Dynamic Performance Air Filters

Explore our best-selling Oldsmobile parts for the 1966 Dynamic among 2 OEM and aftermarket options starting from $31.99.

show more show less

from

$83.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply

from

$31.99

Replacement for 14 inch by 3 inch round air filter
Fits perfectly in your vehicle’s air box as a replacement for your factory air filter
Engineered for increased flow and greater performance
Fits select Buick, Cadillac, Chevy, GM, Mercedes, Oldsmobile and Pontiac models
Factory pre-oiled and ready to use
Simple installation

Top-Rated Performance and Racing Products Brands For Your 1966 Oldsmobile Dynamic

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1966 Oldsmobile Dynamics. Below you’ll find some of our best rated Performance and Racing Products from K&N, Holley, and B & M, and more. Performance and Racing Products from these brands that fit a 1966 Dynamic start at just $19.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1966 Oldsmobile Dynamic Performance and Racing Products

When it comes to maintaining or upgrading your 1966 Oldsmobile Dynamic, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1966 Oldsmobile Dynamic. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $19.99, with an average price of just $51.99. Plus, with over 23 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $19.99

(9)

Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine

“5 Star Review”

from $83.99

(14)

Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance

“Great product as usual from K&N!!”

Popular Holley 1966 Oldsmobile Dynamic Performance and Racing Products

Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1966 Oldsmobile Dynamic owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1966 Dynamic, Advance Auto Parts carries a full inventory of 3 Holley Performance and Racing Products. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Holley Performance and Racing Products range from $509.99 to $716.99, plus, with more than 53 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $509.99

(45)

Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny

“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”

from $716.99

(2)

Prem Street Carbs (Avengers)

“This was the carb that my engine builder suggested.”

from $699.99

(6)

Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny

“great carb”

FAQs for 1966 Oldsmobile Dynamic Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1966 Oldsmobile Dynamics?

Out of 66 Performance and Racing Products that fit 1966 Oldsmobile Dynamics, the following parts are the top sellers:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Oil Pan Bolt Kit (17360377) – $20.79

What’s the price range for 1966 Oldsmobile Dynamic Performance and Racing Products?

Performance and Racing Product prices for the 1966 Oldsmobile Dynamic start at $5.99 and go up to $972.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1966 Oldsmobile Dynamic?

The average price for Performance and Racing Products for the 1966 Oldsmobile Dynamic is $281.88. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Oldsmobile Dynamic model years?

Yes, we currently carry Performance and Racing Products for 7 model years of Oldsmobile Dynamics between 1958 and 1965. Performance and Racing Products are bought most frequently for the following model years: 1965, 1964, 1963, 1962, 1961, 1960, 1959, and 1958.

What are the cheapest Performance and Racing Products for my 1966 Oldsmobile Dynamic?

The cheapest 1966 Oldsmobile Dynamic Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
D4260 Flame-Thrower Distributor Rotor HEI/EST Black (10111551) – $11.99
D4061 Flame-Thrower HEI Distributor Rotor Red (10111583) – $17.99

What are the top-rated Performance and Racing Products that fit the 1966 Oldsmobile Dynamic?

Out of 303 reviews by customers, our 1966 Oldsmobile Dynamic Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1966 Oldsmobile Dynamic and their top-rated products:

Performance Oil Filters
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120011) – $19.99
Performance Radiators
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120011) – $19.99
Performance Air Filters
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120011) – $19.99

What types of Performance and Racing Products do you sell for my 1966 Oldsmobile Dynamic?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1966 Oldsmobile Dynamic:

Can I get help with 1966 Oldsmobile Dynamic Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Performance and Racing Products and more.

What is your return policy for Oldsmobile Dynamic Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Oldsmobile Dynamic Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1966 Oldsmobile Dynamic Performance and Racing Products

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2003)

B & M – Automatic Shifter, Z-Gate (Part No.80681)

Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

Energy Suspension – Sway Bar End Link Kit (Part No.9.8118R)

Edelbrock – Intake Manifold Gasket for 1965-76 400-425-455 Oldsmobile engines (Part No.7284)

Spectre – Water Neck; Olds (Part No.4733)

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

Mallory – Unilite Ignition Module (Part No.605)

B & M – Tork Master 3000 (Part No.20402)

B & M – Transkit For 65-87 TH400 Transmission (Part No.20229)

B & M – Transpak For 65-87 TH400 Transmission (Part No.20228)

Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)

Mallory – Distributor Condenser (Part No.401)

MSD Ignition – Distributor; Oldsmobile V8; Ready-to-Run (Part No.8529)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Energy Suspension – Control Arm Bushing Set (Part No.3.3132G)

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Oldsmobile (Part No.7373)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

B & M – Aluminum Braided Dip Stick, Fits TH-400 Transmission (Part No.22166)

Spectre – Spectre Replacement Air Filter (Part No.HPR0136)

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Accel – Distributor Cap And Rotor Kit (Part No.8120)

Energy Suspension – Control Arm Bushing Set (Part No.3.3132R)

Mr. Gasket – Exhaust Gasket Set (Part No.453)

PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)

Mr. Gasket – Exhaust Gasket Set (Part No.453)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1439)

B & M – Tork Master 3000 (Part No.20402)

Mr. Gasket – High Performance Thermostat (Part No.4365)

Spectre – Water Neck; Olds (Part No.4733)

Edelbrock – Intake Manifold Gasket for 1965-76 400-425-455 Oldsmobile engines (Part No.7284)

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5788G)

B & M – Performance Torque Converter for GM TH400, 350, & 375 Transmissions (Part No.20400)

B & M – Holeshot 3600 (Part No.20425)

B & M – Holeshot 3000 (Part No.20413)

B & M – Holeshot 2400 (Part No.20412)

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Oldsmobile (Part No.7373)

Competition Cams – Endure-X Solid Roller Lifter for Oldsmobile 350-455 (Part No.849-1)

Competition Cams – ENGINE TIMING SET (Part No.2113)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2003)

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

Holley – Prem Street Carbs (Avengers) (Part No.0-80770)

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)

Holley – Off Road Carbs (Part No.0-90670)

Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)

Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.E-1650)

Spectre – Spectre Replacement Air Filter (Part No.HPR0136)