1966 Oldsmobile Delta 88 Differentials

Essential 1966 Oldsmobile Delta 88 Differentials

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)

For Use With General Motors, 0.800"  Head L, 3/8" - 24 Thread Size, Chrome Moly

from

$37.99
The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

Product Features:
  • Forged From Premium Grade 8740 Chrome Moly Steel
  • Heat Treated
  • Nominally Rated At 200,000 Psi Tensile Strength
  • Specially Hardened, Precision Ground Washers
  • 3/8″-24 RH Thread Size
  • 0.8″ Underhead Length
  • 200,000 PSI
See More

Powertrax – Grip LS Traction System (Part No.LS201028)

Grip LS Traction System

from

$463.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Powertrax – Lock Right Locker (Part No.1930-LR)

Lock Right Locker

from

$445.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

    Differential Cover Gasket

    from

    $9.99
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM8.5IK)

    Differential Gear Install Kit

    from

    $65.99


    Product Features:
    • MINI INSTALL KIT GM 8.5 REAR
    See More

    Driveworks – Oil Seal (Part No.S-8460N)

    Oil Seal

    from

    $6.29
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Multi Purpose Seal (Part No.8460N)

    Multi Purpose Seal

    from

    $13.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Pro-King – Shim Kit (Part No.741A200)

    Shim Kit

    from

    $19.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1101)

    Differential Carrier Shim Kit

    from

    $8.49
    High-quality Differential Carrier Shim Kit

    Product Features:
    • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
    See More

    Dorman – Help – Pinion Crush Sleeves (Part No.81057)

    Pinion Crush Sleeves

    from

    $5.29
    This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

    Product Features:
    • Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
    • Required replacement – when servicing the differential
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Motive Gear – Crush Sleeve (Part No.9785792)

    Crush Sleeve

    from

    $2.69
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G875410)

    Performance Differential Ring and Pinion

    from

    $222.99


    Product Features:
    • GM 10BL 7.5 &7.625 R/P 4.10 MGP 10 3/8 X 18 LH THRED BLTS, PD=1.438
    See More

    Motive Gear – Differential Ring and Pinion (Part No.GM10-456)

    Differential Ring and Pinion

    from

    $212.99


    Product Features:
    • GM 10BL 8.5″ R/P 4.56 MG FRT/REAR
    See More

    National – Bearings (Part No.M86610)

    Bearings

    from

    $9.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.HM89210)

    Bearings

    from

    $14.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Pro-King – Differential Rebuild Kit (Part No.742G004)

    Differential Rebuild Kit

    from

    $82.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

    Product Features:
    • Contains the highest quality Japanese bearings
    See More

    Motive Gear – Differential Super Bearing Kit – Koyo (Part No.R10RSK)

    Differential Super Bearing Kit - Koyo

    from

    $152.99


    Product Features:
    • SUPER KIT-GM 8.5 CAR
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1104)

    Differential Pinion Shim Kit

    from

    $12.99


    Product Features:
    • KIT SHIM
    See More

    Pro-King – Differential Pinion Shim Kit (Part No.742G202)

    Differential Pinion Shim Kit

    from

    $5.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    GM Genuine Parts – Side Differential Bearing (Part No.S1380)

    Side Differential Bearing

    from

    $89.99
    GM Genuine Parts Differential Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings are low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

    Product Features:
    • Low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing
    • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
    • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
    • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
    • GM regularly updates production and service part designs to integrate new materials and technologies
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

    Tapered Roller Bearing

    from

    $6.79
    Product Features:
    • Brand may vary by location
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-HM-89249)

    Tapered Roller Bearing

    from

    $13.49
    Product Features:
    • Brand may vary by location
    See More

    Pro-King – Differential Bearing Cone (Part No.742G255)

    Differential Bearing Cone

    from

    $19.79
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Powertrax – No-Slip Traction System (Part No.9207822801)

    No-Slip Traction System

    from

    $544.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Powertrax – Lock Right Locker (Part No.1940-LR)

    Lock Right Locker

    from

    $441.99
    The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    National – Shaft Repair Sleeve (Part No.99152)

    Shaft Repair Sleeve

    from

    $38.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    National – Shaft Repair Sleeve (Part No.99193)

    Shaft Repair Sleeve

    from

    $43.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    1966 Oldsmobile Delta 88 Differentials

    Maybe you’re in the middle of a full rebuild of that 1966 Oldsmobile Delta 88. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 45 different Differentials in our inventory ranging from $4.99 to $566.99. That means you can find the exact parts or products you need to keep that 1966 Oldsmobile Delta 88 running smoothly.

    Differentials are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1966 Oldsmobile Delta 88. Valvoline, FELPRO, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1966 Oldsmobile Delta 88, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 404 reviews in this category, some of the top rated parts include Bearings with 4.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1966 Oldsmobile Delta 88 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1966 Oldsmobile Delta 88 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1966 Oldsmobile Delta 88 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Delta 88 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Top 1966 Oldsmobile Delta 88 Differentials from Felpro

    Felpro products are another trusted brand when it comes to Differentials for your 1966 Oldsmobile Delta 88. Popular Felpro parts include:
    Differential Cover Gasket
    from $9.99
    (195)
    Differential Cover Gasket
    Rear Differential Cover Gaskets

    FAQs for 1966 Oldsmobile Delta 88 Differentials

    What are the most purchased Differentials for the 1966 Oldsmobile Delta 88?

    Out of 45 Differentials for the 1966 Oldsmobile Delta 88, the most popular in our inventory are:
    Bearings
    from $9.49
    This product is not rated
    Bearings
    Rear Differential Pinion Bearings
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    Differential Carrier Shim Kits
    Differential Pinion Shim Kit
    from $7.49
    (1)
    Differential Pinion Shim Kit
    Differential Pinion Shims

    What are the top-rated 1966 Oldsmobile Delta 88 Differentials?

    Top-rated Differentials for your 1966 Oldsmobile Delta 88 based on customer reviews/ratings are:
    Bearings
    from $25.49
    (1)
    Bearings
    “This Is The One That Fit My 1971 CHEVY TRUCK 12 BOLT PINION REAR BACK BEARING”