1966 Oldsmobile Cutlass Bodies and Fender Parts
More 1966 Oldsmobile Cutlass Bodies and Fender Parts
Find your specific 1966 Oldsmobile Cutlass original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1966 Oldsmobile Cutlass Bodies and Fender Parts
KAI – Floor Pan (Part No.GMK4032515681R)
from
$99.99
New Goodmark Passenger Side T Board Patch Panel
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403051164R)
from
$121.99
New Goodmark Cab Floor Rear Passenger Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated
Product Features:
See More
Product Features:
- Under Rear Seat 30 Inch X 26 Inch EDP Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403250068L)
from
$394.99
New Goodmark Cab Floor, Driver Side, Full Length, 30 Inch X 62 Inch, EDP-Coated
Product Features:
See More
Product Features:
- Driver Side Full Length 30 Inch X 62 Inch EDP-Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Dash Panel Patch (Part No.GMK403052164)
from
$79.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield
Product Features:
See More
Product Features:
- 57 Inch X 2 Inch Between Dash And Windshield
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan Toe Board (Part No.GMK403037064R)
from
$99.99
New Goodmark Passenger Side T Board Patch
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan Toe Board (Part No.GMK403237068R)
from
$119.99
New Goodmark Floor Pan T Board, Passenger Side, 30 X 16, With Floor To Firewall Extension, Includes Part Of Transmission Hump
Product Features:
See More
Product Features:
- Passenger Side 30 X 16 With Floor To Firewall Extension Includes Part Of Transmission Hump
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Floor Plug (Part No.SB 48-A)
from
$10.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Floor Plug. For under rear seat. Fits a 1 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Pillar Post Seal (Part No.CZ 8104)
from
$73.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Finely crafted and detailed. All of Metro’s Door Lock Pillar Seals are the best available anywhere. They are the best, with molded-in steel cores and superbly detailed outer rubber. Windshield Pillar Post Seals for Convertibles. Sponge reproduction with a jet black, smooth skin. Each. piece is 23-3/16 In. long. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hardtop Moulding (Part No.RR 5000)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Convertible Top Seal (Part No.RR 1609)
from
$356.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Convertible Top Rail Kit. 7-Piece set includes all right and left side top rail seals and windshield top header seal (HD 729).
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hardtop Moulding (Part No.RR 5001)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hardtop Moulding (Part No.RR 5019-T)
from
$131.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Rear Roof Rail Seals. Fits 4-door station wagon. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hardtop Moulding (Part No.RR 5002)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Floor Reinforcement (Part No.GMK4030517642)
from
$129.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Liftgate Seal (Part No.GMK403071464S)
from
$79.99
New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece, Except Wagon/El Camino
Product Features:
See More
Product Features:
- 2 Piece Except Wagon/El Camino
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Deck Lid Seal (Part No.GMK403070364)
from
$27.99
New Goodmark Trunk Weatherstrip, Fits All A-Body Models And X Body Models Except Hatchback Or Wagon
Product Features:
See More
Product Features:
- Fits All A-Body Models And X Body Models Except Hatchback Or Wagon
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Liftgate Seal (Part No.GMK403171466S)
from
$79.99
New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece Driver And Passenger Side
Product Features:
See More
Product Features:
- 2 Piece Driver And Passenger Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Deck Lid Seal (Part No.GMK403570378)
from
$84.99
New Goodmark Trunk Weatherstrip
Product Features:
See More
Product Features:
- Made Of Rubber
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Moulding Clip (Part No.WF 205)
from
$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Quarter Window Reveal Molding Clip. Made of Steel. 1-3/8 In. X 11/16 In. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Dorman – Rivet-Push In-Hole Diameter .250 In. (sold by each) (Part No.700-576)
from
$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Windshield Garnish Clip – Exterior (Part No.963-211)
from
$4.99
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
Metro Mould – Moulding Clip (Part No.WF 211)
from
$3.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rear Windshield Reveal Molding Clip. Made of steel. 15/16 In. X 3/4 In. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Popular 1966 Oldsmobile Cutlass Bodies and Fender Parts Categories
1966 Oldsmobile Cutlass Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 1966 Oldsmobile Cutlass. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 9 different Bodies and Fender Parts in our inventory ranging from $3.49 to $356.99. That means you can find the exact parts or products you need to keep that 1966 Oldsmobile Cutlass running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1966 Oldsmobile Cutlass. Metro Mould and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 1966 Oldsmobile Cutlass, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 1966 Oldsmobile Cutlass rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 1966 Oldsmobile Cutlass Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1966 Oldsmobile Cutlass demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Cutlass the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
FAQs for 1966 Oldsmobile Cutlass Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 1966 Oldsmobile Cutlass?
Out of 9 Bodies and Fender Parts for the 1966 Oldsmobile Cutlass, the most popular in our inventory are:
