1966 Mercury Capri Air Intakes
Find Your Specific 1966 Mercury Capri Air Intakes
Below you will find various in-demand Mercury Air Intakes, components and accessories for your 1966 Capri. Advance Auto Parts has popular Capri parts like Carburetor Kits, Air Cleaner Parts, Carburetor Parts and more. You’ll also find aftermarket and OEM Air Intakes for other Capri model years including
1982,
1983,
1984,
1985,
1986,
1991,
1992,
1993,
1994 and more. Select a category of 1966 Mercury Capri Air Intakes below and start saving instantly.
Popular 1966 Mercury Capri Air Intakes Categories
Essential Air Intakes for 1966 Mercury Capris
Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)
from
$359.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-86670BL)
from
$921.99
The Ultra Street Avenger carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Street Avenger carburetors have the same great features as their aluminum counterparts such as a tumble polished aluminum finish; quick change vacuum secondaries for easy tuning to optimize performance or fuel economy; four vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy startups; built-in fuel filters; and an included fuel line kit so there are no unnecessary trips back to the parts store. Ultra Street Avengers feature the same optimized street calibration as the zinc versions so you know they will run great on your vehicle. In addition, the Ultra Street Avenger now comes with anodized metering blocks and a base plate made from 6061-T6 billet aluminum and a built in, clear fuel level sight glass for easy, no mess fuel level adjustments. Don’t trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
Product Features:
See More
Product Features:
- Ultra Street Avenger Has Optimized Calibration Works Out Of Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- 4 Corner Idle Allows You To Precisely Control Your Idle System
- Built In Clear Fuel Level Sight Glass For Fuel Level Adjustment
- Aluminum Construction For A 43% Weight Savings
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Standard Flow Carburetor Power Valve No. 12685 Single Stage 8.5in Hg (Part No.12685)
from
$17.99
The Edelbrock No. 12685 Single Stage 8.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More
Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)
from
$33.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Product Features:
See More
Product Features:
- Rubber Material
- For Holley®, Barry Grant, And Demon Gasoline Carburetors
- No Hardware Included
- 50cc Volume
- Made iIn The USA
Edelbrock – Transfer Tube O-Rings No. 12416 For Holley No. 4150, No. 4160, No. 4165, And No. 4175 Carbs (Part No.12416)
from
$14.99
Edelbrock Transfer Tube O-Rings Pair No. 12416 Will Fit Holley 4150, 4160, 4165 &4175 Series Carb
See More
Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)
from
$14.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45
Product Features:
See More
Product Features:
- Fits Holley® Carburetors With Center Hung Fuel Bowl
- Includes Adjusting Nut
- Includes Locking Screw
- Includes O-Ring
- Includes Washers
Victor Reinz – Air Cleaner Mounting Gasket (Part No.71-13854-00)
from
$3.49
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Dana engineering-approved for fit, form and function
- Meets or exceeds OE specifications
Felpro – Air Cleaner Mounting Gasket (Part No.60038)
from
$4.29
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Edelbrock – Intake Manifold replacement base and upper plenum gasket for #7126 (Part No.7231)
from
$26.99Product Features:
- Performer RPM 5.0L Gasket Set
- Includes Base To-Upper And Plenum Cover Gaskets
Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.72208)
from
$174.99
Available in different sizes for many different vehicle models/years. Clean positive seal. Embossed silicone bead surrounding the port. Matched to manifolds and cylinder heads. In the early days of the automotive performance industry, you either ran what
Product Features:
See More
Product Features:
- Clean positive seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
- Fits 1963-96 289/302/351W Engines
- 10-Pack Of Gaskets
Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$22.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23
Product Features:
See More
Product Features:
- Center Hung Floats
- 0.11 in. Needle Diameter
- Viton® Needle Material
- Sold Individually
- Non-Adjustable Type
Mr. Gasket – Intake Manifold Bolts (Part No.958G)
from
$23.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers
Product Features:
See More
Product Features:
- Hex Head
- Zinc Plated
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Edelbrock – Performer Series Carburetor Calibration Kit, Helps get the best performance (Part No.1487)
from
$66.99
Product Features:
See More
- Customize Carburetor Calibration and Performance
- Owners Manual has Assembly Help
- Includes Metering Rod Retaining Spring
- Includes Metering Rods
- Includes Metering Jets
- Includes Step-Up Springs
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G2110)
from
$105.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1755)
from
$66.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Dorman – Steel Cup Expansion Plug 1-53/64 In., Height 0.380 (sold by each) (Part No.555-083)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Rubber Expansion Plug 1-5/8 In. – Size Range 1-5/8 In. – 1-3/4 In. (Part No.10232)
from
$5.99
Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.
Product Features:
See More
Product Features:
- Manufactured from high quality materials for a long service life
- Torque values listed on parts (where applicable)
- Easy to install
- Constructed to strict engineering quality standards
Dorman – Brass Cup Expansion Plug 25.73mm SC, Height 0.270 (sold by each) (Part No.565-018)
from
$1.99
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – Standard Main Jet Carburetor Metering Jet Size .079 (Pair) (Part No.12479)
from
$14.99
The Edelbrock 94 No. 12479 Carburetor Jets .079″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.
See More
Edelbrock – Standard Main Jet Carburetor Metering Jet Size .080 (Pair) (Part No.12480)
from
$14.99
The Edelbrock 94 No. 12480 Carburetor Jets .080″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.
See More
Edelbrock – Standard Main Jet Carburetor Metering Jet Size .082 (Pair) (Part No.12482)
from
$14.99
The Edelbrock 94 No. 12482 Carburetor Jets .082″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.
See More
Victor Reinz – Carburetor Mounting Gasket (Part No.71-13716-00)
from
$6.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Dana engineering-approved for fit, form and function
- Meets or exceeds OE specifications
Victor Reinz – Carburetor Mounting Gasket (Part No.71-13696-00)
from
$15.29
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Dana engineering-approved for fit, form and function
- Meets or exceeds OE specifications
Felpro – Carburetor Mounting Gasket (Part No.60094-1)
from
$3.79
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Holley – REPLACEMENT MAIN BODY KIT FOR 0-80457S (Part No.134-342)
from
$217.99
REPLACEMENT MAIN BODY KIT FOR 0-80457S
Upgrade your 1966 Mercury Capri with Top-Quality Air Intakes
When it comes to maintaining or upgrading your 1966 Mercury Capri, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Air Intakes are key to keeping your Capri functioning at its best. At Advance Auto Parts, we offer a wide selection of 134 Air Intakes for the 1966 Mercury Capri, designed to meet your needs without breaking the bank.
From
Carburetor Kit
replacements to
Air Cleaner Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1966 Mercury Capri at great prices.
Our Air Intakes inventory for this model
ranges from just $2.29 to $1,950.99, with
an average price of $562.56.
Our 134 Air Intakes in stock come from 8 trusted brands, so you’re sure to find the right part for your 1966 Mercury Capri without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Mercury Capri, we stock popular OEM and aftermarket Air Intakes from top names
like Felpro, Edelbrock, Holley, and more.
Felpro Air Intakes
start at just $3.49 and boast an impressive 4.6 stars average rating from customers.
Edelbrock and Holley also bring quality to the table, with Air Intakes available starting at $13.99, and at an average 4.4 stars rating.
With 170 customer reviews and counting, our 1966 Mercury Capri Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1966 Mercury Capri is always ready to roll. We’re committed to providing you with everything you need to keep your Capri in top shape, all in one place.
Start shopping confidently below for your 1966 Mercury Capri!
Best-Selling Carburetor Kits for 1966 Mercury Capris
Enhance the driving experience in your Mercury with 5 quality Carburetor Kit components, starting at $33.99.
Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)
from
$47.99
Product Features:
See More
- The Edelbrock #12750 4160 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
- The kit comes with the necessary components to rebuild a 4160 style Carburetor.
Edelbrock – Carburetor Repair Kit #12760 Fits Most Holley 4150 Carburetors (Part No.12760)
from
$60.99
Product Features:
See More
- The Edelbrock #12760 4150 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
- The kit comes with the necessary components to rebuild a 4150 style Carburetor.
Edelbrock – Performer Series Carburetor Calibration Kit, Helps get the best performance (Part No.1487)
from
$66.99
Product Features:
See More
- Customize Carburetor Calibration and Performance
- Owners Manual has Assembly Help
- Includes Metering Rod Retaining Spring
- Includes Metering Rods
- Includes Metering Jets
- Includes Step-Up Springs
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1822)
from
$37.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1767)
from
$33.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Most Popular 1966 Mercury Capri Air Cleaner Parts
Customize your Mercury with 1 Air Cleaner Parts products
like Air Cleaner Mount Gaskets, all
priced under $3.49.
Felpro – Air Cleaner Mounting Gasket (Part No.60032)
from
$3.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Top Picks for 1966 Mercury Capri Carburetor Parts
Upgrade Mercury Capris with top-quality Carburetor Parts parts, including 119 OEM and aftermarket selections for your 1966 model.
Felpro – Carburetor Mounting Gasket (Part No.60094-1)
from
$3.79
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – Carburetor Accelerator Pump Diaphragm 30cc Gasoline (Part No.12400)
from
$13.99
The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline No: 12400 for 4150 Carburetors Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
Product Features:
See More
Product Features:
- The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline No: 12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
- Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)
from
$518.99
The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Performance and Race Carburetor: 600 CFM, Manual Choke, 4 Barrel, Square Bore, Dual Inlet (Part No.0-4776C)
from
$819.99
The Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (Red, Blue, or Black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with Red, Blue, or Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. Dont trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Optimized Street/Strip Calibration That Works Out Of The Box
- Man. Choke Cable Hand Controlled For Cold Start Control
- Mechanical Secondaries For Awesome Tire Turning Performance
- Dual Accelerator Pumps For Add Fuel Under Initial Acceleration
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
- 100% Wet Flow Tested By Holley Technicians
Edelbrock – Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1406)
from
$450.99
The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$414.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
United Carb – Carburetor-Remanufactured (Part No.7-7154)
from
$303.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Holley – Prem Street Carbs (Avengers) (Part No.0-81570)
from
$687.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Manual Choke For Precise Cold Start Control
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carbs (Part No.0-3310C)
from
$649.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Performance Upgrade For Stock To Mildly Modified Vehicles
- Universal calibration for easy bolt-on performance
- Man. Choke Cable Hand Controlled For Cold Start Control
- Vacuum Secondaries For Use On Wide Variety Of Vehicles
- Dual feed fuel inlets for constant high volume fuel delivery
- Power Valve Blow Out Protection
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carbs (Part No.0-1850S)
from
$491.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a
Product Features:
See More
Product Features:
- Vibratory Polished Alum Good Looks/Weight Savings/Lasting Shine
- Performance Upgrade For Stock To Mildly Modified Vehicles
- Universal Calibration For Easy Bolt-On Performance
- Man. Choke Cable Hand Controlled For Cold Start Control
- Vacuum Secondaries For Use On Wide Variety Of Vehicles
- Single Feed Fuel Inlet For Easy Installation
Edelbrock – Fuel Bowl Gaskets for Holley Carburetors, Direct replacement for proper fit (Part No.12382)
from
$16.99
The Edelbrock No. 12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 carburetors. Kit includes two black nitrile fuel bowl gaskets.
Product Features:
See More
Product Features:
- The Edelbrock No: 12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
- Kit includes two black nitrile fuel bowl gaskets.
Edelbrock – AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1901)
from
$519.99
The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
Felpro – Carburetor Mounting Gasket (Part No.60059)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Carburetor Mounting Gasket (Part No.13130)
from
$2.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1902)
from
$458.99
The Edelbrock #1902 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
United Carb – New Carburetor (Part No.7-7154N)
from
$372.99
New Carburetor
Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$22.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23
Product Features:
See More
Product Features:
- Center Hung Floats
- 0.11 in. Needle Diameter
- Viton® Needle Material
- Sold Individually
- Non-Adjustable Type
Holley – Street Carburetor: 500 CFM, Manual Choke, 2 Barrel, 2300 Bore, Single Inlet, Shiny (Part No.0-4412S)
from
$549.99
The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to push you to the finish line on Saturday night, the Holley 0-4412 Performance 2BBL is the perfect choice.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Man. Choke Cable Hand Controlled For Cold Start Control
- 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
- Power Valve Blow-Out Protection
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
Holley – Street/Strip Carbs (Part No.0-4779C)
from
$869.99
The Ultra Double Pumper Carburetors feature all aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Three different anodized color options (Red, Blue, or Black) allow for a personalized look while maintaining the ultra high strength and durability you get from billet. They weigh in at approximately 5 lbs less than a comparable zinc carburetor. The new Ultra Double Pumper Carburetors have an enhanced fuel curve for optimum performance, with many more features such as aluminum construction; anodized billet aluminum metering blocks and base plate; 4 corner idle for precise idle control; mechanical secondaries for great performance; clear fuel level sight plugs for easy, no mess fuel level adjustments; Ford automatic transmission kickdown for use on popular Ford transmissions; four vacuum ports for all necessary vacuum accessories; and for the first time on a Double Pumper, factory pre-set electric choke for easy, fast cold start-ups. The clean, polished look coupled with Red, Blue, or Black metering blocks and throttle body will certainly set your ride apart whether you are at the show or track. Dont trust your performance to just anyone, Holley is the only Modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60s.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Corrosion Resistance w/Classic Look
- Optimized Street/Strip Calibration That Works Out Of The Box
- Manual Choke For Precise Cold Start Control
- Mechanical Secondaries For Awesome Tire Turning Performance
- 4 Corner Idle Allows You To Precisely Control Your Idle System
- Dual Accelerator Pumps For Add. Fuel Under Initial Acceleration
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Lightweight Vehicles w/Auto Trans w/High Stall/Low Gearing
Holley – Carburetor – 770 CFM Alum Street Avenger E/C (Part No.0-83770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Features A Tumble Polished Finish Can Also Be Hand Polished
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Glass Fuel Level Sight Windows For Easy Safe Float Adjustments
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- 4 Corner Idle Allows You To Precisely Control Your Idle System
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
Holley – Prem Street Carbs (Avengers) (Part No.0-81670)
from
$687.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Manual Choke For Precise Cold Start Control
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80458SA)
from
$528.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
Product Features:
See More
Product Features:
- Vibrant Polished Alum Good Looks/Weight Savings/Lasting Shine
- Performance Upgrade For Stock To Mildly Modified Vehicles
- Universal Calibration For Easy Bolt-On Performance
- Factory Preset Electric Choke For Easy Startups
- For All Weights/Gearing/Trans For Smooth Open Of Secondaries
- Dual Feed Fuel Inlets For Constant High Volume Fuel Delivery
- Power Valve Blow-Out Protection
- Clear Fuel Level Sight Glasses
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)
from
$33.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Product Features:
See More
Product Features:
- Rubber Material
- For Holley®, Barry Grant, And Demon Gasoline Carburetors
- No Hardware Included
- 50cc Volume
- Made iIn The USA
Holley – Street Carburetor: 750 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80459SA)
from
$549.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
Product Features:
See More
Product Features:
- Vibrant Polished Alum Good Looks/Weight Savings/Lasting Shine
- Performance Upgrade For Stock To Mildly Modified Vehicles
- Universal Calibration For Easy Bolt-On Performance
- Factory Preset Electric Choke For Easy Startups
- For All Weights/Gearing/Trans For Smooth Open Of Secondaries
- Single Feed Fuel Inlet For Easy Installation
- Power Valve Blow-Out Protection
- 100% Wet Flow Tested By Holley Technicians
In-Demand Intake Manifold Parts for 1966 Mercury Capris
Select from 9 premium Intake Manifold Parts parts for your 1966 Mercury Capri, with prices ranging from $2.29 to $736.99.
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90145)
from
$26.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90103-1)
from
$26.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Manifold Bolts (Part No.958G)
from
$23.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers
Product Features:
See More
Product Features:
- Hex Head
- Zinc Plated
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)
from
$359.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock – RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8 (Part No.7521)
from
$454.99
Edelbrock Part #7521 RPM Air-Gap intake manifold is designed for the small-block 302 CID Ford V8 or 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that?s been used on our Victor Series competition intakes and i
Product Features:
See More
Product Features:
- RPM Air-Gap for 302-331-347 Small-Block Ford V8
- Air-Gap design features an open air space under the plenum
- Separates fuel and air from engine heat
- Larger runners over standard 7121 manifold
- Includes nitrous bosses
Dorman – Steel Cup Expansion Plug 1-53/64 In., Height 0.380 (sold by each) (Part No.555-083)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – Performer RPM Ford FE 390 Intake Manifold, Dual Plane, Aluminum, Square Bore (Part No.7105)
from
$736.99
Edelbrock part No. 7105 Performer RPM FE intake manifold is designed for high-performance’s street 390-406-410-427-428 c.i.d. Ford FE V8’s with standard 390-428 c.i.d., 427 low/medium-rise or Edelbrock Performer RPM FE heads. The dual-plane constant cross-sectional area design builds low and mid- range acceleration while optimized runner paths make exceptional top-end horsepower. Has provision for adding the PCV or breather flange at rear. No exhaust crossover passage.
Product Features:
See More
Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
Holley – Single Plane 4150 Carbureted Intake Manifold (Part No.300-277)
from
$459.99
The intake manifolds are designed for use with 289-347 cubic inch Small Block Ford engines with a 8.2″ deck height.
Product Features:
See More
Product Features:
- Single plane design with isolated plenum for cooler charge air temperatures
- 4150 square bore mounting flange
- Power band: 2500-7500 RPM
- Height: front 5.58″, rear 6.40″
- Port size: 1.82″ height, 1.04″ width
- Extra material allows for porting to 2.00″ height, 1.20″ width
- Accessory ports under the carburetor in 1/8 NPT, 1/4 NPT and 3/8 NPT sizes
Victor Reinz – Engine Intake Manifold Gasket Set (Part No.11-10137-01)
from
$26.49
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets for severe applications.
- MaxDry STL gaskets are designed for longer service intervals and OAT coolants that have placed additional burdens on the lifespan of molded intake manifold gaskets. Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.
- It is critical that the molded rubber sealing areas of these gaskets resist all the possible fuels, coolants and oil formulations that may be used. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber.
Top-Rated Air Intakes Brands For Your 1966 Mercury Capri
Shop for the best-rated brands offering Air Intakes and other products for your 1966 Mercury Capris. Below you’ll find some of our best rated Air Intakes from Felpro, Edelbrock, and Holley, and more. Air Intakes from these brands that fit a 1966 Capri start at just $3.49 and are rated as high as 4.6 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 1966 Mercury Capri Air Intakes
When it comes to maintaining or upgrading your 1966 Mercury Capri, using quality Air Intakes is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Air Intakes, specifically designed for the 1966 Mercury Capri. With over 3 Felpro brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.49, with an average price of just $11.42. Plus, with over 7 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Edelbrock 1966 Mercury Capri Air Intakes
Edelbrock auto parts is one of the highest quality Air Intake brands in the market. Any 1966 Mercury Capri owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1966 Capri, Advance Auto Parts carries a full inventory of 3 Edelbrock Air Intakes. Plus you will be keeping your Mercury in peak condition while saving money because prices on these Edelbrock Air Intakes range from $13.99 to $518.99, plus, with more than 59 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.
from
$450.99
(55)
Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“Great company to deal with!”
from
$518.99
(3)
Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“only required idle mixture and idle speed adjustments.”
FAQs for 1966 Mercury Capri Air Intakes
Which Air Intakes are best-sellers for 1966 Mercury Capris?
Out of 134 Air Intakes that fit 1966 Mercury Capris, the following parts are the top sellers:
- Engine Intake Manifold Gasket Set (5184436) – $26.99
- Carburetor Mounting Gasket (5181771) – $3.99
- Intake Manifold Bolts (17360287) – $23.79
What’s the price range for 1966 Mercury Capri Air Intakes?
Air Intake prices for the 1966 Mercury Capri start at $2.29 and go up to $1,950.99 for the most premium parts.
What’s the average price of a Air Intake for a 1966 Mercury Capri?
The average price for Air Intakes for the 1966 Mercury Capri is $562.56. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Air Intakes for other Mercury Capri model years?
What are the cheapest Air Intakes for my 1966 Mercury Capri?
The cheapest 1966 Mercury Capri Air Intakes we carry in stock are:
- Steel Cup Expansion Plug 1-53/64 In., Height 0.380 (sold by each) (22140430) – $2.29
- Carburetor Mounting Gasket (3209881) – $2.99
- Air Cleaner Mounting Gasket (3203808) – $3.49
- Carburetor Mounting Gasket (5181852) – $3.79
- Carburetor Mounting Gasket (5181771) – $3.99
What are the top-rated Air Intakes that fit the 1966 Mercury Capri?
Out of 170 reviews by customers, our 1966 Mercury Capri Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1966 Mercury Capri and their top-rated products:
- Air Cleaner Parts
- Air Cleaner Mounting Gasket (3203808) – $3.49
- Intake Manifold Parts
- Air Cleaner Mounting Gasket (3203808) – $3.49
What types of Air Intakes do you sell for my 1966 Mercury Capri?
As of 6/2/26, these are some of the most in-demand types of Air Intakes for a 1966 Mercury Capri:
Can I get help with 1966 Mercury Capri Air Intake orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Air Intakes and more.
What is your return policy for Mercury Capri Air Intakes?
Advance Auto Parts keeps returns simple. For new Mercury Capri Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
