1966 Mercedes-Benz 250SE Brake Parts

Essential 1966 Mercedes-Benz 250SE Brake Parts

ATE Premium One – Brake M/C Reservoir (Part No.N301711738ATE)

Brake M/C Reservoir

from

$8.30
Brake M/C Reservoir

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

MTC – Brake Pad Shim (Part No.N102017259MTC)

Brake Pad Shim

from

$2.30
Platform specific rubber to metal composite material designed to solve noise and vibration problems. MTC rubber to metal composite materials for noise damping in disc brakes combine a number of valuable Features and Benefits: vibration insulation, compressibility and excellent adhesion. The rubber composite materials are excellent for applications with demanding insulation for vibration and noise. The materials retain their integrity even when subjected to high pressure and high temperature. MTC brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.

Product Features:
  • Platform Specific Design
  • Combats Brake Squeal
  • OE-Style Composite Core Shim
  • Effective Thermal Barrier
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.11-1919)

Remanufactured Brake Master Cylinder

from

$48.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
  • Plastic reservoirs are 100% vacuum-tested to ensure proper function
See More

Febi – Parking Brake Shoe Spring (Part No.N500272009FEB)

Parking Brake Shoe Spring

from

$1.61
Parking Brake Shoe Spring

FTE – Brake Caliper Repair Kit (Part No.N105052612FTE)

Brake Caliper Repair Kit

from

$38.96
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

FAG – Brake Caliper Repair Kit (Part No.N105011801FAG)

Brake Caliper Repair Kit

from

$38.85
FAG Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Wagner – ThermoQuiet Disc Brake Pad Set (Part No.PD31)

ThermoQuiet Disc Brake Pad Set

from

$15.00
Wagner TQ® brake pads feature a zero-copper friction formulation and a unique Integrally Molded Insulator (IMI) technology for quieter operation.

Product Features:
  • QUIETER OPERATION — Application-specific design and a unique laser-shaped friction spreads out heat, sound and vibration to reduce noise opportunities
  • COMPREHENSIVE COVERAGE — Brake pads available for most vehicles on the road
See More

ATE – Booster Check Valve (Part No.N4030459144ATE)

Booster Check Valve

from

$43.33
Booster Check Valve

ATE – Brake Reservoir (Part No.N301011992ATE)

Brake Reservoir

from

$198.02
ATE Continental Teves, Inc. of Germany is one of the largest Original Equipment brake system manufacturers in the world, supplying brake components that are installed as Original Equipment by many premier vehicle automakers. Some models require fluid level sensor modification when installed on early model vehicles still using prior versions of master cylinders.
See More

ATE – Brake Pad Pin Kit (Part No.N106225691ATE)

Brake Pad Pin Kit

from

$11.35
This is a brake hardware kit consisting of (4) 000 991 03 60 brake pins and (2) 000 421 02 91 anti-rattle spring. The ATE Brake Pad Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ATE Premium One – Original Brake Caliper, Friction Ready (Part No.N1040939960ATE)

Original Brake Caliper, Friction Ready

from

$484.70
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104011989ATE)

Original Brake Caliper, New - Friction Ready

from

$561.81
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.53-5937)

Vacuum Brake Booster: Without Master Cylinder

from

$140.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

PowerStop – Z17 Low-Dust Ceramic Brake Pads with Hardware (Part No.17-031)

Z17 Low-Dust Ceramic Brake Pads with Hardware

from

$39.99
The Power Stop Z17 Evolution Plus ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z17 pads maintain consistent wear and performance while ensuring a fast break-in. Stainless steel hardware is included with the Z17 brake pads making it easier to complete your brake job. The Power Stop Z17 Evolution Plus ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

Carquest Premium Gold – Brake Pads Without Hardware, Ceramic, Long Pad Life, Quiet Braking (Part No.GNAD31)

Brake Pads Without Hardware, Ceramic, Long Pad Life, Quiet Braking

from

$43.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications, provides better value and
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

1966 Mercedes-Benz 250SE Brake Parts

You count on your 1966 Mercedes-Benz 250SE to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 17 Brake Parts ranging in price from $1.61 to $561.81, you’re sure to find everything you need for your 1966 Mercedes-Benz 250SE.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 12 different brands like Cardone, Carquest Premium, and ATE. 1966 Mercedes-Benz 250SE Brake Parts start as low as $1.61!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 33 extensive product reviews on 1966 Mercedes-Benz 250SE Brake Parts. Some of the top-rated Brake Parts products we carry are Original Brake Caliper, New – Friction Ready with 1.0 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1966 Mercedes-Benz 250SE below to get started!

Top-Rated Brake Parts Brands For Your 1966 Mercedes-Benz 250SE

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Mercedes-Benz 250SE running right for years to come. In our inventory you’ll find brands like Cardone, Carquest Premium, ATE, and even more.

Popular Cardone Brake Parts

You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1966 Mercedes-Benz 250SE back on the road. Some of the top-rated Cardone products in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

FAQs for 1966 Mercedes-Benz 250SE Brake Parts

What are the most purchased Brake Parts for the 1966 Mercedes-Benz 250SE?

Out of 17 Brake Parts for the 1966 Mercedes-Benz 250SE, the most popular in our inventory are:
Booster Check Valve
from $43.33
This product is not rated
Booster Check Valve
Power Brake Booster Check Valves
Remanufactured Brake Master Cylinder
from $48.99
This product is not rated
Remanufactured Brake Master Cylinder
Brake Master Cylinders
ThermoQuiet Disc Brake Pad Set
from $15.00
(2)
ThermoQuiet Disc Brake Pad Set
Front Brake Pads and Shoes

What are the top-rated 1966 Mercedes-Benz 250SE Brake Parts?

Top-rated Brake Parts for your 1966 Mercedes-Benz 250SE based on customer reviews/ratings are:
Original Brake Caliper, New - Friction Ready
from $561.81
(1)
Original Brake Caliper, New – Friction Ready
“Might be great plugs, but not so much in a GM 3.4 V6 Rough idle and early fouling.”