1966 Jeep CJ3 Steering and Chassis Parts
More 1966 Jeep CJ3 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1966 Jeep CJ3, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1966 Jeep CJ3 Steering and Chassis Parts
Omix – Steering Gear Box Sector Shaft (Part No.18027.01)
from
$265.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme
Product Features:
See More
Product Features:
- Direct OE Replacement
- Built To Original Specifications
- 5 Year Limited Warranty
Skyjacker – Single Stab Kt: Silver W/Bk Bo (Part No.9100)
from
$85.99
Skyjacker(R) steering stabilizer, A steering stabilizer is a dampening shock for your steering system. It dampens out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the driver hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive but worthy investment
Product Features:
See More
Product Features:
- Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
- Stabilizer Dampens Out The Harshness Of The Highway, The Shimmy From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
- Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
- Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
- Reduce Physical Strength Handling Larger Tires
Skyjacker – Single Stab Kt: White W/Red Bo (Part No.7100)
from
$91.99
Skyjacker(R) steering stabilizer, A steering stabilizer is a dampening shock for your steering system. It dampens out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the driver hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive but worthy investment
Product Features:
See More
Product Features:
- Skyjacker(R) Steering Stabilizer Is A Dampening Shock For Your Steering System
- Stabilizer Dampens Out The Harshness Of The Highway, The Shimmy From Running The Additional Weight Of Larger Tires And Wheels And Places Control Back Into The Driver Hands
- Stabilizers Also Reduce The Fatigue Of The Driver On A Personal Level By Reducing The Amount Of Physical Strength It Takes To Guide Those Larger Tires On And Off The Road
- Changing The Weak Stock Unit For A Better Performing Replacement Or Adding Dual Steering Stabilizers Is An Inexpensive But Worthy Investment
- Reduce Physical Strength Handling Larger Tires
Omix – Sector Shaft Oil Seal (Part No.18029.04)
from
$4.79
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme
Product Features:
See More
Product Features:
- High Quality Construction
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Knuckle (Part No.18026.02)
from
$102.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Cast Iron
- Red Powdercoated
- Right
- Direct Fit
- Limited 5 Year Warranty
Omix – Knuckle (Part No.18026.01)
from
$102.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Cast Iron
- Red Powdercoated
- Left
- Direct Fit
- Limited 5 Year Warranty
Driveworks – Tapered Roller Bearing (Part No.S-11590)
National – Bearings (Part No.11590)
from
$26.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
MOOG – Tie Rod End (Part No.ES140R)
from
$67.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Cardone – Power Steering Filter (Part No.20-P038F)
from
$26.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
National – Multi Purpose Seal (Part No.480821)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
MOOG – Tie Rod End (Part No.ES62L)
from
$77.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Crown Auto Jeep Replacmnt – Tie Rod End, Non-Greasable, Outer, LHD (Part No.J8136674)
from
$20.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Limited 12 Month Or 12,000 Mile Warranty
Omix – Tie Rod End (Part No.18043.03)
from
$31.49
Are your Jeep’s tie rod ends loose? Have your front tires begun to wear unevenly? Omix-ADA offers high-quality replacements that will give you years of service and get you back on the road. Standard industry practice is to replace both tie rod ends. If on
Product Features:
See More
Product Features:
- Steel
- With Hardware
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Steering Knuckle Seal Kit (Part No.18026.03)
from
$13.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
Product Features:
See More
Product Features:
- Left/Right Side
- OE Style
- Direct Fit
- Limited 5 Year Warranty
National – Multi Purpose Seal (Part No.2064)
from
$47.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Omix – King Pin Cup (Part No.18026.06)
from
$27.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Front
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – King Pin Cap (Part No.18026.04)
from
$46.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Front
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
Omix – Tie Rod End Boot (Part No.18048.01)
from
$2.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Rubber
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Rugged Ridge – Tie Rod End Dust Boot (Part No.18369.02)
from
$18.29
This pair of OE tie rod boots are a direct fit replacement and are made from polyurethane which is hardier than rubber meaning they will last much longer than the originals. Also allows for better handling and control for your Jeep.
Product Features:
See More
Product Features:
- Polyurethane
- Direct Fit
- Better Handling and Control
- OE Style
- Limited 5 Year Warranty
Popular 1966 Jeep CJ3 Steering and Chassis Parts Categories
1966 Jeep CJ3 Steering and Chassis Parts
You count on your 1966 Jeep CJ3 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 31 Steering and Chassis Parts ranging in price from $2.49 to $265.99, you’re sure to find everything you need for your 1966 Jeep CJ3.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 11 different brands like Imperial, Cardone, and Rancho. 1966 Jeep CJ3 Steering and Chassis Parts start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 735 extensive product reviews on 1966 Jeep CJ3 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Tie Rod End with 4.0 stars and Transmission Oil Cooler Replacement Hose with 3.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1966 Jeep CJ3 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1966 Jeep CJ3
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Jeep CJ3 running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Rancho, and even more.
Popular Rancho Steering and Chassis Parts
You’ll find popular Rancho brand products across Gear Boxes. All are waiting to get your 1966 Jeep CJ3 back on the road. Some of the top-rated Rancho products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1966 Jeep CJ3, and some of our most reviewed Imperial parts include:
FAQs for 1966 Jeep CJ3 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1966 Jeep CJ3?
Out of 31 Steering and Chassis Parts for the 1966 Jeep CJ3, the most popular in our inventory are:
What are the top-rated 1966 Jeep CJ3 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1966 Jeep CJ3 based on customer reviews/ratings are:
from
$77.99
(1)
Tie Rod End
“This is a pretty good product. It was easy to install and use. The grease fittings were a little hard to install, but take your time and they work out”
from
$14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses.
11/32″ is an odd size hose. Th”
from
$31.49
(1)
Tie Rod End
“The part I ordered was pictured and priced correctly, however the part that was shipped was incorrect and when I took it to the store, they were quick”
