1966 International M1400 Performance and Racing Products
Find Your Specific 1966 International M1400 Performance and Racing Products
Below you will find various in-demand International Performance and Racing Products, components and accessories for your 1966 M1400. Advance Auto Parts has popular M1400 parts like Performance Ignition Products, Performance Shifters, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other M1400 model years including
1965
1967 and more. Select a category of 1966 International M1400 Performance and Racing Products below and start saving instantly.
Popular 1966 International M1400 Performance and Racing Products Categories
Essential Performance and Racing Products for 1966 International M1400s
B & M – Torque Converter, Holeshot 3000 (Part No.10425)
from
$999.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Torque Converter, Holeshot 2400 (Part No.10415)
from
$549.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Torque Converter, Tork Master 2400 (Part No.10417)
from
$449.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
B & M – Automatic Shifter – Megashifter – Universal (Part No.80690)
from
$527.99
The Classic BAndM Megashifter features a Ratcheting action, ensuring positive shifts. Chrome Knob, Neutral safety switch And NHRA/IHRA Approved reverse lockout. Fits Most 3 And 4 speeds.
Product Features:
See More
Product Features:
- Universal Floor Mount
- Base Can Be Trimmed-Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)
from
$483.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Base Trimmed For Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)
from
$527.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Use w/Reverse Pattern Valve Body
- Includes Neutral Safety Switch
- Includes Backup Light Switch
Edelbrock – Performer 2-O Intake Manifold for 1965-90 Big-Block Chevy w/Oval Port Heads (Part No.2161)
from
$387.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Will Not Fit Under Corvette Hoods
- Available in Multiple Finishes
- Use Choke Rod PN[9179] for Stock Carburetor
Edelbrock – Torker II 2-O Big Block Chevy Intake Manifold (Part No.5061)
from
$454.99
use Performer 2-O #2161.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- Use with Large Oval Port Heads (1975 and Earlier)
- Will fit Under Corvette Hood Without Modifications
- Not For Tall Block V8 Engines
Edelbrock – Street Tunnel Ram Big Block Chevy 2-O Intake Manifold (Part No.7115)
from
$838.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.
Product Features:
See More
Product Features:
- For 3500 to 7500 RPM
- Use Where Low-End Torque is Not a Prime Factor
- Great For Engines w/Slightly Modified Heads
- Top Has Vacuum Outlet for Power Brakes
- Will Accept Forward and Sideways Mounted Carbs
- Carburetor Center-to-Center Dimensions 9.38 in
- HEI Ignition Will Not Clear Manifold
- Street Machines; Street Rods; Pro-Street; Marine
Edelbrock – Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (Part No.2694)
from
$87.99Product Features:
- Mounts Standard Flange Holley Carbs Sideways
- Use on Tunnel Rams
- 0.550 in. Thick
Edelbrock – Side-Mount Throttle Linkage for B/B Chevy #7075 Victor 2-R Manifold (Part No.7077)
from
$236.99
Product Features:
See More
- Steel Material
- Sideways Orientation
- Adjustable
- 2-Barrel Configuration
- Made In The USA
Edelbrock – Intake Manifold replacement top gasket (Part No.6989)
from
$20.99
Replacement gasket for Edelbrock tunnel ram intake. Use with intake PN(7115). Base PN(7190). Top PN(7191). One gasket only.
Product Features:
See More
Product Features:
- Replacement Gasket for Edelbrock Tunnel Ram Intake
- Use w/Intake PN[7115]/Base PN[7190]/Top PN[7191]
- One Gasket Only
Upgrade your 1966 International M1400 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1966 International M1400, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your International or enhancing its overall performance, Performance and Racing Products are key to keeping your M1400 functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Performance and Racing Products for the 1966 International M1400, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Shifters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1966 International M1400 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $20.99 to $999.99, with
an average price of $502.24.
Our 15 Performance and Racing Products in stock come from 3 trusted brands, so you’re sure to find the right part for your 1966 International M1400 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 International M1400, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory B & M, and more.
Mallory Performance and Racing Products
start at just $92.99 and boast an impressive 4.9 stars average rating from customers.
With 35 customer reviews and counting, our 1966 International M1400 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1966 International M1400 is always ready to roll. We’re committed to providing you with everything you need to keep your M1400 in top shape, all in one place.
Start shopping confidently below for your 1966 International M1400!
Best-Selling Performance Ignition Products for 1966 International M1400s
Enhance the driving experience in your International with 3 quality Performance Ignition Product components, starting at $33.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Most Popular 1966 International M1400 Performance Shifters
Customize your International with 3 Performance Shifters products
like Performance Shifters, all
priced under $527.99.
B & M – Automatic Shifter – Megashifter – Universal (Part No.80690)
from
$527.99
The Classic BAndM Megashifter features a Ratcheting action, ensuring positive shifts. Chrome Knob, Neutral safety switch And NHRA/IHRA Approved reverse lockout. Fits Most 3 And 4 speeds.
Product Features:
See More
Product Features:
- Universal Floor Mount
- Base Can Be Trimmed-Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)
from
$483.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Base Trimmed For Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)
from
$527.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Use w/Reverse Pattern Valve Body
- Includes Neutral Safety Switch
- Includes Backup Light Switch
Top Picks for 1966 International M1400 Performance Engines
Upgrade International M1400s with top-quality Performance Engines parts, including 9 OEM and aftermarket selections for your 1966 model.
B & M – Torque Converter, Holeshot 3000 (Part No.10425)
from
$999.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Edelbrock – Street Tunnel Ram Big Block Chevy 2-O Intake Manifold (Part No.7115)
from
$838.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.
Product Features:
See More
Product Features:
- For 3500 to 7500 RPM
- Use Where Low-End Torque is Not a Prime Factor
- Great For Engines w/Slightly Modified Heads
- Top Has Vacuum Outlet for Power Brakes
- Will Accept Forward and Sideways Mounted Carbs
- Carburetor Center-to-Center Dimensions 9.38 in
- HEI Ignition Will Not Clear Manifold
- Street Machines; Street Rods; Pro-Street; Marine
B & M – Torque Converter, Holeshot 2400 (Part No.10415)
from
$549.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Edelbrock – Torker II 2-O Big Block Chevy Intake Manifold (Part No.5061)
from
$454.99
use Performer 2-O #2161.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
- Not for Mileage or Emissions Applications
- Use with Large Oval Port Heads (1975 and Earlier)
- Will fit Under Corvette Hood Without Modifications
- Not For Tall Block V8 Engines
B & M – Torque Converter, Tork Master 2400 (Part No.10417)
from
$449.99
A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
- Washer Between Turbine and Cover
Edelbrock – Performer 2-O Intake Manifold for 1965-90 Big-Block Chevy w/Oval Port Heads (Part No.2161)
from
$387.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Will Not Fit Under Corvette Hoods
- Available in Multiple Finishes
- Use Choke Rod PN[9179] for Stock Carburetor
Edelbrock – Side-Mount Throttle Linkage for B/B Chevy #7075 Victor 2-R Manifold (Part No.7077)
from
$236.99
Product Features:
See More
- Steel Material
- Sideways Orientation
- Adjustable
- 2-Barrel Configuration
- Made In The USA
Edelbrock – Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (Part No.2694)
from
$87.99Product Features:
- Mounts Standard Flange Holley Carbs Sideways
- Use on Tunnel Rams
- 0.550 in. Thick
Edelbrock – Intake Manifold replacement top gasket (Part No.6989)
from
$20.99
Replacement gasket for Edelbrock tunnel ram intake. Use with intake PN(7115). Base PN(7190). Top PN(7191). One gasket only.
Product Features:
See More
Product Features:
- Replacement Gasket for Edelbrock Tunnel Ram Intake
- Use w/Intake PN[7115]/Base PN[7190]/Top PN[7191]
- One Gasket Only
Top-Rated Performance and Racing Products Brands For Your 1966 International M1400
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1966 International M1400s. Below you’ll find some of our best rated Performance and Racing Products from Mallory and B & M, and more. Performance and Racing Products from these brands that fit a 1966 M1400 start at just $92.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1966 International M1400 Performance and Racing Products
When it comes to maintaining or upgrading your 1966 International M1400, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1966 International M1400. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $92.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular B & M 1966 International M1400 Performance and Racing Products
B & M auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1966 International M1400 owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1966 M1400, Advance Auto Parts carries a full inventory of 1 B & M Performance and Racing Products. Plus you will be keeping your International in peak condition while saving money because prices on these B & M Performance and Racing Products range up to $527.99, plus, with more than 1 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$527.99
(1)
Automatic Shifter – Megashifter – Universal
“its was pretty easy to install if u have any type of knowlegde of cars it should not be difficult at all and the shifting is awesome just be careful w”
FAQs for 1966 International M1400 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1966 International M1400s?
Out of 15 Performance and Racing Products that fit 1966 International M1400s, the following parts are the top sellers:
- Automatic Shifter, Quicksilver 4 Speed (17130071) – $483.99
- Distributor Wiring Harness (17350080) – $33.99
- Performer 2-O Intake Manifold for 1965-90 Big-Block Chevy w/Oval Port Heads (5026458) – $387.99
What’s the price range for 1966 International M1400 Performance and Racing Products?
Performance and Racing Product prices for the 1966 International M1400 start at $20.99 and go up to $999.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1966 International M1400?
The average price for Performance and Racing Products for the 1966 International M1400 is $502.24. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other International M1400 model years?
What are the cheapest Performance and Racing Products for my 1966 International M1400?
The cheapest 1966 International M1400 Performance and Racing Products we carry in stock are:
- Intake Manifold replacement top gasket (22341099) – $20.99
- Distributor Wiring Harness (17350080) – $33.99
- Carb Adapter #2694 Mounts 4150 Holley Carb Sideways On Tunnel Ram 0.55 in-Pair (22340996) – $87.99
- Unilite Ignition Module (17350025) – $92.99
- Promaster Classic Series; Ignition Coil (17350082) – $199.99
What are the top-rated Performance and Racing Products that fit the 1966 International M1400?
Out of 35 reviews by customers, our 1966 International M1400 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1966 International M1400 and their top-rated products:
- Performance Ignition Products
- Unilite Ignition Module (17350025) – $92.99
- Performance Shifters
- Unilite Ignition Module (17350025) – $92.99
What types of Performance and Racing Products do you sell for my 1966 International M1400?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1966 International M1400:
Can I get help with 1966 International M1400 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about International Performance and Racing Products and more.
What is your return policy for International M1400 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new International M1400 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
