1966 Dodge D100 Series Starter Parts

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• 
  
  

Product Features:

• Each unit is triple-tested to ensure quality and performance
• All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
• Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
• Remanufactured by an IATF/TS 16949 certified supplier, ensuring adherence to the highest industry standards for quality and reliability.
• Designed to meet or exceed OE specifications for fit, form, and function, providing seamless compatibility and dependable performance.

Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• 
  
  

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
• All new components are utilized to ensure long service life
• Internal electronics are upgraded for heavy duty reliability (where applicable)
• Armatures and commutators are 100% load tested
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
• Designed to meet or exceed OE specifications for fit, form and function
• Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
• All new components are utilized to ensure long service life
• Internal electronics are upgraded for heavy duty reliability (where applicable)
• Armatures and commutators are 100% load tested
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

• Designed to meet OE specifications for fit, form and function
• Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
• Application-specific technical bulletins included where applicable
• All units are 100% triple tested to ensure quality and performance
• Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

Our DynaForce starter is designed to crank over the highest compression engines on a hot day in Death Valley. Not that too many race cars are sitting in Death Valley, but it’s good to know that you have the oomph to make it happen. The DynaForce starter features all new components beginning with a three horsepower motor. This power is used to crank over the reduced 4.4:1 gear set to deliver great torque to the engine’s ring gear to get the engine turning. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement and thousands of starts. The downsized housing clears most headers and oil pans. Denso Style starter with “Nose” on the rear of the starter housing for engines with pilot hole applications. The 4.4:1 gear reduction provides high torque for easy starting of stock and high compression engines.

Product Features:

• Also Available in Black
• Downsized design helps clearance issues w/oil pans and exhaust
• Ball bearing supported armature and pinion gear
• 3 Hp Motor Provides Power For High Compression Engines
• Gear reduction of 4.4:1 improves torque for great cranking
• Downsized design helps clearance issues
• Mount can be clocked to assist in mounting

Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are primed to keep fleets moving forward. Built to perform in severe duty environments, with high output capabilities built in through improved technical & material formulas for high power output and efficient performance.

Product Features:

• High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
• Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
• Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
• Integrated magnetic switch provides protection against weak power from batteries.
• Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
• Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.