1966 Dodge Charger Drivetrains

Popular 1966 Dodge Charger Drivetrains Categories

Essential Drivetrains for 1966 Dodge Chargers

Motive Gear – Differential Bearing Kit – Timken (Part No.R8.75ERT)

Differential Bearing Kit - Timken

from

$131.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG & SEAL CHRYS. 1.75″ PINION
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Powertrax – Lock Right Locker (Part No.1240-LR)

Lock Right Locker

from

$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Powertrax – Grip PRO Traction System (Part No.GT436035)

    Grip PRO Traction System

    from

    $596.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Yukon Gear – Fill Plug For Chrysler 8.75", 3/4" Thread (Part No.33462)

    Fill Plug For Chrysler 8.75", 3/4" Thread

    from

    $9.99
    Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality

    Product Features:
    • Fill plug
    • Fits Chrysler 8.75″
    See More

    Yukon Gear – Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7290 U/Joint Size (Part No.41009)

    Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7290 U/Joint Size

    from

    $156.99
    Yukon yoke for Chrysler 8.75″ with 29 spline pinion and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″
    • 29 spline
    • 7290 u-joint size
    • 2.625″ snap ring span
    • 1.125″ cap diameter
    • Inside snap ring design
    • Strap style
    See More

    Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)

    Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each)

    from

    $4.99
    This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 27 Spline (Part No.39002)

    Open Spider Gear Set For Chrysler 8.25", 27 Spline

    from

    $209.99
    USA Standard Gear open spider gear set for Chrysler 8.25″, 27 spline .

    Product Features:
    • Spider gear kit
    • Fits Chrysler 8.25″ 27 spline open differential
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

    Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

    from

    $5.99
    Product Features:
    • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

    Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

    from

    $13.99
    Product Features:
    • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
    See More

    Yukon Gear – Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70 (Part No.32352)

    Hardcore Diff Cover For Dana 50, Dana 60 & Dana 70

    from

    $288.99
    Product Features:
    • Nodular iron for added strength
    • Thick design
    • Durable powder coat finish
    • Magnetic drain plug
    • Made in USA
    • High strength stainless steel fasteners
    See More

    Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

    Dana 60, Dana 70 & Dana 80 Cover Bolt

    from

    $5.99
    3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

    Product Features:
    • Cover bolt for Dana Spicer 60, 70 and 80
    • 3/8″
    See More

    Yukon Gear – Replacement Standard Open Carrier Case For Dana 60, 4.10 & Down (Part No.20047)

    Replacement Standard Open Carrier Case For Dana 60, 4.10 & Down

    from

    $339.99
    Yukon replacement standard open carrier case for Dana 60, 4.10 & down Semi-Float & Full float, (incl ABS) 2-1/8″ tall.

    Product Features:
    • Standard open carrier case
    • Fits Dana Spicer 60
    • 4.10 and down ratio only
    • Does not include spider gears
    See More

    Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

    Replacement Carrier Shim Kit For Dana 60, 61 & 70U

    from

    $104.99
    Product Features:
    • Carrier shims for Dana Spicer 60 and 70U
    See More

    National – Bearings (Part No.307-L)

    Bearings

    from

    $37.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – 8.25" Chrysler Pinion Gear Thrust Washer (Part No.33273)

    8.25" Chrysler Pinion Gear Thrust Washer

    from

    $26.99
    8.25″ Chrysler pinion gear thrust washer.

    Product Features:
    • Pinion gear thrust washer
    • Fits Chrysler 8.25″
    See More

    National – Bearings (Part No.M802048)

    Bearings

    from

    $23.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Replacement Positraction Internals For Dana 60 And 61 (Full-Floating) With 30 Spline Axles (Part No.16086)

    Replacement Positraction Internals For Dana 60 And 61 (Full-Floating) With 30 Spline Axles

    from

    $892.99
    Yukon replacement positraction internals for Dana 60 and 61 (full-floating) with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Spider gear kit
    • Fits Dana Spicer 60 with Trac Loc positraction with 30 spline axles
    • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
    See More

    Yukon Gear – Pinion Nut For Chrysler 300, Charger, Magnum (Part No.33170)

    Pinion Nut For Chrysler 300, Charger, Magnum

    from

    $53.99
    Pinion nut for Chrysler 300, CHARGER, MAGNUM.

    Product Features:
    • Pinion nut
    • Fits Chrysler C198 and C210
    See More

    Yukon Gear – Cross Pin Shaft For Chrysler 7.25" (Part No.33307)

    Cross Pin Shaft For Chrysler 7.25"

    from

    $49.99
    Cross pin shaft for Chrysler 7.25″.

    Product Features:
    • Cross pin shaft
    • Fits Chrysler 7.25″
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 3.23 Ratio (Part No.24238)

    High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 3.23 Ratio

    from

    $459.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a fine spline pinion which takes a 29 spline yoke.

    Product Features:
    • Fits Chrysler 8.75″ “89” case housing
    • 8.75″ ring gear diameter
    • 29 spline pinion
    • 12 ring gear bolts
    • 3.23 ratio
    See More

    Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

    O-Ring For Dana 60 Zip Locker Seal Housing

    from

    $11.29
    Product Features:
    • O-ring for seal housing
    • Fits Dana Spicer 60
    See More

    Yukon Gear – Set Up Bearing (Part No.56039)

    Set Up Bearing

    from

    $276.99
    Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.

    Product Features:
    • Set up bearing kit
    • Fits Dana Spicer 60
    • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
    See More

    Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

    7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25"

    from

    $10.99
    7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

    Product Features:
    • U-Joint strap bolt
    • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
    • 7290 u-joint size
    See More

    Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

    Replacement Baffle For Dana 60 & Dana 70-U

    from

    $6.99
    Product Features:
    • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
    See More

    Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

    Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

    from

    $37.99
    Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

    Product Features:
    • Redi-Sleeve yoke saver
    • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
    See More

    Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

    Taper Bearing Cup

    from

    $6.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Differential (Part No.26040)

    Differential

    from

    $939.99
    Differential

    Upgrade your 1966 Dodge Charger with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1966 Dodge Charger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Drivetrains are key to keeping your Charger functioning at its best. At Advance Auto Parts, we offer a wide selection of 319 Drivetrains for the 1966 Dodge Charger, designed to meet your needs without breaking the bank. From Spindle replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1966 Dodge Charger at great prices. Our Drivetrains inventory for this model ranges from just $1.49 to $1,566.99, with an average price of $219.41. Our 319 Drivetrains in stock come from 13 trusted brands, so you’re sure to find the right part for your 1966 Dodge Charger without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Dodge Charger, we stock popular OEM and aftermarket Drivetrains from top names like Moog Driveworks, and more. Moog Drivetrains start at just $10.99 and boast an impressive 4 stars average rating from customers. With 425 customer reviews and counting, our 1966 Dodge Charger Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1966 Dodge Charger is always ready to roll. We’re committed to providing you with everything you need to keep your Charger in top shape, all in one place. Start shopping confidently below for your 1966 Dodge Charger!

    Best-Selling Spindles for 1966 Dodge Chargers

    Enhance the driving experience in your Dodge with 10 quality Spindle components, starting at $3.49.

    Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)

    Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In.

    from

    $3.49
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

    Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm

    from

    $4.99
    This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)

    Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each)

    from

    $4.99
    This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

    Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each)

    from

    $3.99
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)

    Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS

    from

    $8.99
    Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.

    Product Features:
    • Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
    • 2.030″ I.D.
    • 8 bent over tabs
    See More

    Yukon Gear – Spindle Nut For Dana 60 & 70, 1.940" I.D., With Plastic Ring (Part No.33486)

    Spindle Nut For Dana 60 & 70, 1.940" I.D., With Plastic Ring

    from

    $26.99
    Spindle nut for Dana 60 & 70, 1.940″ I.D., with plastic ring. This replaces Spicer part number 39695.

    Product Features:
    • Spindle nut
    • Fits Dana Spicer 60 and 70
    • 1.940″ I.D.
    • Has plastic inner ring
    See More

    Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)

    Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS

    from

    $10.99
    Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.

    Product Features:
    • Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
    • 1.830″ I.D.
    • 10 outer tabs
    See More

    Yukon Gear – Spindle Nut, 2.065" I.D., Six Slots (Part No.33484)

    Spindle Nut, 2.065" I.D., Six Slots

    from

    $27.99
    Spindle nut, 2.065″ I.D., six slots. This replaces Spicer part number 36635.

    Product Features:
    • Spindle nut
    • 6 slots
    • 2.065″ I.D.
    See More

    Yukon Gear – Spindle Nut For Dana 60, 1.750" I.D., 6 Sided (Part No.33476)

    Spindle Nut For Dana 60, 1.750" I.D., 6 Sided

    from

    $15.99
    Spindle nut for Dana 60, 1.750″ I.D., 6 sided. This replaces Spicer part number 30636.

    Product Features:
    • Spindle nut
    • Fits Dana Spicer 60
    • 6 sides
    • 1.750″ I.D.
    See More

    Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)

    Spindle Washer - I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each)

    from

    $14.29
    This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Most Popular 1966 Dodge Charger Transfer Cases

    Customize your Dodge with 5 Transfer Cases products like Input Shaft Bearings, Input Shaft Seals, and Oil Pump Housing Seals, all priced under $24.99.

    Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

    Taper Bearing Cup

    from

    $6.49
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Driveworks – Taper Bearing Cone (Part No.S-HM-88649)

    Taper Bearing Cone

    from

    $19.29
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Shaft Repair Sleeve (Part No.99125)

    Shaft Repair Sleeve

    from

    $24.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Felpro – Engine Oil Pump Cover Seal (Part No.13338)

    Engine Oil Pump Cover Seal

    from

    $1.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Engineered and manufactured specifically for the repair environment
    • Unsurpassed quality you can trust
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    FAG US – CUP (Part No.M88010)

    CUP

    from

    $11.29
    CUP

    Top Picks for 1966 Dodge Charger Drive Shafts and Axles

    Upgrade Dodge Chargers with top-quality Drive Shafts and Axles parts, including 12 OEM and aftermarket selections for your 1966 model.

    National – Bearings (Part No.HM88649)

    Bearings

    from

    $21.79
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

    Drive Shaft Pinion Yoke

    from

    $117.99


    Product Features:
    • PINION YOKE
    • CAST:1310
    • U-BOLT STYLE
    See More

    National – Bearings (Part No.307-L)

    Bearings

    from

    $37.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)

    Pinion Yoke Dust Shield For Dana 60 & 70

    from

    $7.99
    Product Features:
    • Pinion yoke dust shield
    • Fits Dana Spicer 60 and 70
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56072)

    The Carrier Bearing Puller

    from

    $883.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    See More

    Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 1310 U/Joint Size (Part No.41004)

    Yoke For Chrysler 7.25" And 8.25" With A 1310 U/Joint Size

    from

    $226.99
    Yukon yoke for Chrysler 7.25″ and 8.25″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 7.25″ and 8.25″
    • 27 spline
    • 1310 u-joint size
    • Outside snap ring design
    • 3.219″ snap ring span
    • 1.062″ cap diameter
    • Strap style
    See More

    Yukon Gear – Fill Plug For Chrysler 8.75", 3/4" Thread (Part No.33462)

    Fill Plug For Chrysler 8.75", 3/4" Thread

    from

    $9.99
    Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality

    Product Features:
    • Fill plug
    • Fits Chrysler 8.75″
    See More

    Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)

    Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size

    from

    $233.99
    Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Dana Spicer 60 and 70
    • 29 spline
    • 1310 u-joint size
    • Outside snap ring design
    • 3.219″ snap ring span
    • 1.062″ cap diameter
    • Strap style
    See More

    Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size (Part No.41027)

    Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size

    from

    $219.99
    Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Dana Spicer 60, 70, 70U and 70HD
    • 29 spline
    • 1350 u-joint size
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • Outside snap ring design
    • U-bolt style
    See More

    Yukon Gear – Extra HD Yoke For Chrysler 8.75" With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41015)

    Extra HD Yoke For Chrysler 8.75" With 29 Spline Pinion And A 1350 U/Joint Size

    from

    $209.99
    Yukon extra HD yoke for Chrysler 8.75″ with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″
    • 29 spline
    • 1350 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • U-bolt style
    See More

    Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41024)

    Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size

    from

    $187.99
    Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.

    Product Features:
    • Fits Dana Spicer 60, 70, 70U and 70HD
    • 29 spline
    • 1330 u-joint size
    • 3.625″ snap ring span
    • 1.062″ cap diameter
    • Outside snap ring design
    • Strap style
    See More

    Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size (Part No.41026)

    Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size

    from

    $179.99
    Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Dana Spicer 60, 70, 70U and 70HD
    • 29 spline
    • 1350 u-joint size
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • Outside snap ring design
    • Strap style
    See More

    In-Demand Differentials for 1966 Dodge Chargers

    Select from 249 premium Differentials parts for your 1966 Dodge Charger, with prices ranging from $3.99 to $1,566.99.

    Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

    Tapered Cone/Cup Wheel Bearing Set

    from

    $13.99
    Value-priced bearing meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Bearings (Part No.387A)

    Bearings

    from

    $22.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Multi Purpose Seal (Part No.8516N)

    Multi Purpose Seal

    from

    $17.29
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

    DIFFERENTIAL GASKET

    from

    $8.29
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Motive Gear – Pinion Nut (Part No.1260823)

    Pinion Nut

    from

    $8.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    National – Bearings (Part No.M86610)

    Bearings

    from

    $9.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

    Dana 60, Dana 70 & Dana 80 Cover Bolt

    from

    $5.99
    3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

    Product Features:
    • Cover bolt for Dana Spicer 60, 70 and 80
    • 3/8″
    See More

    National – Bearings (Part No.HM88610)

    Bearings

    from

    $15.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

    Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18

    from

    $4.99
    Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

    Product Features:
    • Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
    • 1/2″ x 18 thread
    See More

    Yukon Gear – Crush Sleeve (Part No.33093)

    Crush Sleeve

    from

    $10.99
    Crush Sleeve for Model 35, Chrysler 7.25″, 8.25″ Ford 8″ & GM 7.75″. Approx 0.495″ long.

    Product Features:
    • Crush sleeve for AMC Model 35, Chrysler 7.25″ and 8.25″, Ford 8″ and GM 7.75″
    • 0.495″ tall
    See More

    Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

    Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

    from

    $37.99
    Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

    Product Features:
    • Redi-Sleeve yoke saver
    • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
    See More

    National – Bearings (Part No.HM88542)

    Bearings

    from

    $22.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.HM803146)

    Bearings

    from

    $47.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Ring Gear Bolt (Part No.1304)

    Ring Gear Bolt

    from

    $7.99


    Product Features:
    • CHRY 8 3/4″ RING GEAR BOLTS C 8.25″
    See More

    National – Bearings (Part No.HM88510)

    Bearings

    from

    $14.29
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

    Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

    from

    $13.99
    Product Features:
    • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
    See More

    Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)

    Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front

    from

    $8.99
    Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.

    Product Features:
    • Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
    • 3/8″ x 24 thread
    • .866″ long
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    National – Bearings (Part No.HM803110)

    Bearings

    from

    $22.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Pinion Seal (Part No.9316)

    Differential Pinion Seal

    from

    $16.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    Yukon Gear – Pinion Nut (Part No.33142)

    Pinion Nut

    from

    $10.99
    Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

    Product Features:
    • Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
    • 7/8″ x 14 thread
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1118)

    Differential Pinion Shim Kit

    from

    $6.49


    Product Features:
    • DANA PRELOAD SHIMS (D60 & D70)
    See More

    Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)

    Preload Shim Kit For Chrysler 8.75" & Ford 9"

    from

    $21.99
    8.75″ Chrysler & 9″ Ford preload shim kit.

    Product Features:
    • Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
    See More

    Yukon Gear – Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U (Part No.55015)

    Replacement Pinion Preload Shims For Dana 60, Dana 61 & Dana 70-U

    from

    $19.99
    Product Features:
    • Pinion preload shims for Dana Spicer 60 and 70U
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

    Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25"

    from

    $26.99
    Product Features:
    • Pinion nut
    • Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion
    See More

    National – Bearings (Part No.382S)

    Bearings

    from

    $18.79
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1109)

    Differential Pinion Shim Kit

    from

    $13.49


    Product Features:
    • KIT SHIM TOYO TRK 79-92 REAR/89-92 FRONT
    See More

    Motive Gear – Differential Pinion Seal (Part No.5126B)

    Differential Pinion Seal

    from

    $9.99
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)

    8.75" Chrysler Gasket

    from

    $12.99
    8.75″ Chrysler gasket.

    Product Features:
    • Dropout gasket
    • Fits Chrysler 8.75″
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Motive Gear – Differential Pinion Seal (Part No.6808N)

    Differential Pinion Seal

    from

    $24.99
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Yukon Gear – 7.25" & 8.25" Chrysler Pinion Seal (Part No.30189)

    7.25" & 8.25" Chrysler Pinion Seal

    from

    $16.99
    7.25″ & 8.25″ Chrysler pinion seal.Yukon Mighty seal.

    Product Features:
    • Pinion seal
    • Fits Chrysler 7.25″ and 8.25″
    See More

    Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

    Seal Housing For Dana 60, Zip Locker, With O-Rings

    from

    $79.99
    Seal housing for Dana 60, Zip locker, with o-rings.

    Product Features:
    • Seal housing for Dana Spicer 60
    • Includes o-rings
    See More

    Motive Gear – Differential Carrier Shim Kit (Part No.1106)

    Differential Carrier Shim Kit

    from

    $18.99


    Product Features:
    • CARRIER SHIM-DANA 60 & 70
    See More

    Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

    Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25"

    from

    $15.99
    Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

    Product Features:
    • Side adjuster lock bolt
    • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
    See More

    Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

    Replacement Inner Slinger For Dana 60

    from

    $9.99
    Product Features:
    • Inner oil slinger for Dana Spicer 60
    See More

    Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

    Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

    from

    $7.99
    Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

    Product Features:
    • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
    • 0.225″ diameter
    • 1.870″ long
    See More

    Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

    Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

    from

    $5.99
    Product Features:
    • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

    Side Gear Thrust Washer For Dana 60, 70 & 80

    from

    $4.99
    Product Features:
    • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
    • Fits standard open differentials only
    See More

    Yukon Gear – Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7290 U/Joint Size (Part No.41009)

    Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7290 U/Joint Size

    from

    $156.99
    Yukon yoke for Chrysler 8.75″ with 29 spline pinion and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″
    • 29 spline
    • 7290 u-joint size
    • 2.625″ snap ring span
    • 1.125″ cap diameter
    • Inside snap ring design
    • Strap style
    See More

    Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

    Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

    from

    $39.99
    8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

    Product Features:
    • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
    See More

    Yukon Gear – Powr Lok Belleville Clutch Plate, Splined (Part No.16174)

    Powr Lok Belleville Clutch Plate, Splined

    from

    $36.99
    Product Features:
    • Belleville plate, splined
    • Fits Dana Spicer 44 Powr Lok
    See More

    Yukon Gear – Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25" (Part No.55014)

    Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25"

    from

    $17.99
    Yukon 1541H alloy right hand rear axle for Model 35 (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 29-1/4″ inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H allo

    Product Features:
    • Pinion depth shims for AMC Model 35 and Chrysler 7.25″
    See More

    Motive Gear – Differential Crush Sleeve (Part No.3102)

    Differential Crush Sleeve

    from

    $13.99


    Product Features:
    • CRUSH SLEEVE CHRYS 8 3/4
    See More

    Powertrax – Grip PRO Traction System (Part No.GT436035)

    Grip PRO Traction System

    from

    $596.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Dorman – Differential Ring And Pinion Set (Part No.697-347)

    Differential Ring And Pinion Set

    from

    $249.99
    This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

    Product Features:
    • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
    • Effective fix – eliminates grinding and whining from failed original bearings.
    • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
    • Trustworthy quality – backed by team of designers and engineers in the United States
    See More

    Most Sold 1966 Dodge Charger Universal Joints

    Explore our best-selling Dodge parts for the 1966 Charger among 43 OEM and aftermarket options starting from $10.99.

    Spicer – Universal Joint (Part No.5-213X)

    Universal Joint

    from

    $39.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Driveworks – Universal Joint (Part No.DW-316)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    Driveworks – Universal Joint (Part No.DW-315G)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.248)

    Greaseable Super Strength Universal Joint

    from

    $38.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.317)

    Greaseable Premium Universal Joint

    from

    $26.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    MOOG Driveline Products – Universal Joint Strap Kit (Part No.318-10)

    Universal Joint Strap Kit

    from

    $14.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • For U-Joints 315G, 317, 319 & 457
    • Contains two 1-1/2″ bolt center clamps and four 1/4-28 x 5/8″ cap screws
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

    Greaseable Premium Universal Joint

    from

    $25.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Driveworks – Universal Joint (Part No.DW-354)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
    • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)

    Greaseable Super Strength Universal Joint

    from

    $36.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.316)

    Greaseable Premium Universal Joint

    from

    $25.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Driveworks – Universal Joint (Part No.DW-270)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.315G)

    Greaseable Premium Universal Joint

    from

    $28.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Spicer – Universal Joint (Part No.5-1330X)

    Universal Joint

    from

    $37.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Spicer – Universal Joint (Part No.5-811X)

    Universal Joint

    from

    $39.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
    See More

    MOOG Driveline Products – Universal Joint Strap Kit (Part No.316-10)

    Universal Joint Strap Kit

    from

    $10.99
    By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

    Product Features:
    • For U-Joints 316 & 458
    • Contains two 1.54″ bolt center clamps and four 1/4-28 x 5/8″ cap screws
    See More

    Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

    1310 U/Joint With Zerk Fitting On Cross

    from

    $44.99
    Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
    See More

    Spicer – Universal Joint (Part No.5-789X)

    Universal Joint

    from

    $42.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
    See More

    Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

    1310 To 1330 Adapter U/Joint

    from

    $59.99
    Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
    See More

    Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)

    Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts

    from

    $34.99
    1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.

    Product Features:
    • u-joint u-bolt kit
    • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
    • 1310 u-joint size
    • Includes two u-bolts and four nuts
    See More

    Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

    1350 To 1410 Conversion U/Joint

    from

    $78.99
    Yukon 1350 to 1410 conversion u/joint.
    See More

    Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

    1310 To Mechanics 3R Adapter U/Joint

    from

    $109.99
    Yukon 1310 to Mechanics 3R adapter U/Joint.
    See More

    Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

    1350 Lifetime Series U/Joint

    from

    $63.99
    Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

    1330 Dual-Size Cap U/Joint

    from

    $61.99
    Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
    See More

    Yukon Gear – 7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25" (Part No.41013)

    7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25"

    from

    $52.99
    7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25″, 8.25″, 8.75″, and 9.25″.

    Product Features:
    • u-joint strap kit
    • Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
    • 7290 u-joint size
    • Includes two straps and four bolts
    See More

    Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

    1350 U/Joint With Zerk Fitting

    from

    $51.99
    Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)

    1330 Lifetime U/Joint

    from

    $53.99
    1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1330 U/Joint With Zerk Fitting (Part No.42002)

    1330 U/Joint With Zerk Fitting

    from

    $51.99
    Yukon 1330 U/Joint with zerk fitting. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

    1310 Lifetime U/Joint

    from

    $57.99
    1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
    See More

    Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7260 U/Joint Size (Part No.41006)

    Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7260 U/Joint Size

    from

    $213.99
    Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″
    • 10 spline
    • 7260 u-joint size
    • Inside snap ring design
    • 2.125″ snap ring span
    • 1.078″ cap diameter
    • Strap style
    See More

    Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41023)

    Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size

    from

    $203.99
    Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Dana Spicer 60, 70, 70U and 70HD
    • 29 spline
    • 1310 u-joint size
    • 3.219″ snap ring span
    • 1.062″ cap diameter
    • Outside snap ring design
    • U-bolt style
    See More

    Yukon Gear – Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7260 U/Joint Size (Part No.41007)

    Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7260 U/Joint Size

    from

    $188.99
    Yukon yoke for Chrysler 8.75″ with 29 spline pinion and a 7260 U/joint size. 3.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″
    • 29 spline
    • 7260 u-joint size
    • 2.125″ snap ring span
    • 1.078″ cap diameter
    • Inside snap ring design
    • Strap style
    See More

    Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

    1350 To Mechanics 3R Adaptor U/Joint

    from

    $111.99
    Yukon 1350 to Mechanics 3R adaptor U/joint.
    See More

    Yukon Gear – 1410 Lifetime Series U/Joint (Part No.42022)

    1410 Lifetime Series U/Joint

    from

    $84.99
    Yukon 1410 Lifetime Series U/Joint. 4.188″ span ring span. 1.188″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1410 U/Joint With Zerk Fitting (Part No.42009)

    1410 U/Joint With Zerk Fitting

    from

    $61.99
    Yukon 1410 U/Joint with zerk fitting. 4.188″ snap ring span, 1.118″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)

    7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25

    from

    $49.99
    7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.

    Product Features:
    • u-joint strap kit
    • Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
    • 7260 u-joint size
    • Includes two straps and four bolts
    See More

    Spicer – Universal Joint (Part No.5-3228X)

    Universal Joint

    from

    $46.99
    Universal Joint

    Spicer – SPICER U-JOINT (Part No.5-1309X)

    SPICER U-JOINT

    from

    $37.99
    SPICER U-JOINT

    Spicer – Universal Joint (Part No.5-1330-1X)

    Universal Joint

    from

    $36.99
    Universal Joint

    Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)

    Dana 60, Dana 70, And Dana 80 Strap Kit

    from

    $31.99
    Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.

    Product Features:
    • u-joint strap kit
    • Fits Dana Spicer 60, 70, 70U, 70HD and 80
    • 1480 u-joint size
    • Includes two straps and four bolts
    See More

    Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)

    Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit

    from

    $17.99
    U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.

    Product Features:
    • u-joint strap kit
    • Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
    • 1350 and 1410 u-joint size
    • Includes two straps and four bolts
    See More

    Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)

    1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet)

    from

    $15.99
    1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).

    Product Features:
    • u-joint u-bolt kit
    • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
    • 1330 u-joint size
    • Includes two u-bolts and four nuts
    See More

    Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

    7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25"

    from

    $10.99
    7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

    Product Features:
    • U-Joint strap bolt
    • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
    • 7290 u-joint size
    See More

    Top-Rated Drivetrains Brands For Your 1966 Dodge Charger

    Shop for the best-rated brands offering Drivetrains and other products for your 1966 Dodge Chargers. Below you’ll find some of our best rated Drivetrains from Moog and Driveworks, and more. Drivetrains from these brands that fit a 1966 Charger start at just $6.49 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Moog 1966 Dodge Charger Drivetrains

    When it comes to maintaining or upgrading your 1966 Dodge Charger, using quality Drivetrains is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Drivetrains, specifically designed for the 1966 Dodge Charger. With over 9 Moog brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.99, with an average price of just $26.99. Plus, with over 218 customer reviews and an average rating of 4 stars, you can trust that our Moog Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Universal Joint Strap Kit
    from
    $10.99
    This product is not rated

    Universal Joint Strap Kit

    “”

    Greaseable Super Strength Universal Joint
    from
    $38.99

    (3)

    Greaseable Super Strength Universal Joint

    “Quality part”

    Greaseable Premium Universal Joint
    from
    $26.99

    (1)

    Greaseable Premium Universal Joint

    “the u-joint itself fit fine however the grease fitting is too large for the hole provided in the u-joint. I had to enlarge the hole to fit the fitting”

    Popular Driveworks 1966 Dodge Charger Drivetrains

    Driveworks auto parts is one of the highest quality Drivetrain brands in the market. Any 1966 Dodge Charger owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1966 Charger, Advance Auto Parts carries a full inventory of 11 Driveworks Drivetrains. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Driveworks Drivetrains range from $6.49 to $27.49, plus, with more than 88 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    Tapered Roller Bearing
    from
    $13.49
    This product is not rated

    Tapered Roller Bearing

    “”

    Taper Bearing Cone
    from
    $19.29
    This product is not rated

    Taper Bearing Cone

    “”

    Taper Bearing Cup
    from
    $6.49
    This product is not rated

    Taper Bearing Cup

    “”

    FAQs for 1966 Dodge Charger Drivetrains

    Which Drivetrains are best-sellers for 1966 Dodge Chargers?

    Out of 319 Drivetrains that fit 1966 Dodge Chargers, the following parts are the top sellers:

    What’s the price range for 1966 Dodge Charger Drivetrains?

    Drivetrain prices for the 1966 Dodge Charger start at $1.49 and go up to $1,566.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1966 Dodge Charger?

    The average price for Drivetrains for the 1966 Dodge Charger is $219.41. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Dodge Charger model years?

    Yes, we currently carry Drivetrains for 35 model years of Dodge Chargers between 1967 and 2023. Drivetrains are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

    What are the cheapest Drivetrains for my 1966 Dodge Charger?

    The cheapest 1966 Dodge Charger Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1966 Dodge Charger?

    Out of 425 reviews by customers, our 1966 Dodge Charger Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1966 Dodge Charger and their top-rated products:

    What types of Drivetrains do you sell for my 1966 Dodge Charger?

    Can I get help with 1966 Dodge Charger Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Drivetrains and more.

    What is your return policy for Dodge Charger Drivetrains?

    Advance Auto Parts keeps returns simple. For new Dodge Charger Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.