1966 Dodge A100 Drivetrains
More 1966 Dodge A100 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1966 Dodge A100, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1966 Dodge A100 Drivetrains
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Neapco – Universal Joint (Part No.1-6301)
Motive Gear – Differential Crush Sleeve (Part No.3507575)
USA Standard Gear – Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17037)
from
$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits Chrysler 8.25″ with 27 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)
from
$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)
from
$8.99
Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.
Product Features:
See More
Product Features:
- Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
- 3/8″ x 24 thread
- .866″ long
Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.75RLA)
from
$96.99Product Features:
- BEARING KIT 8.75 CHRY 1.875 489 CST OPEN/AUBURN/TRUETRAC/DET.LOCKER
Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)
from
$26.99
Product Features:
See More
- Pinion nut
- Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion
Motive Gear – Differential Pinion Shim Kit (Part No.1109)
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Felpro – Differential Carrier Gasket (Part No.RDS 6583)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Extra HD Yoke For Chrysler 8.75" With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41015)
from
$209.99
Yukon extra HD yoke for Chrysler 8.75″ with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 29 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Yukon Gear – Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7290 U/Joint Size (Part No.41009)
from
$156.99
Yukon yoke for Chrysler 8.75″ with 29 spline pinion and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 29 spline
- 7290 u-joint size
- 2.625″ snap ring span
- 1.125″ cap diameter
- Inside snap ring design
- Strap style
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)
from
$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 60
- Fits standard open and Trac Loc applications
Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 42 Housing In A 3.23 Ratio (Part No.24591)
from
$449.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a coarse spline pinion which takes a 10 spline yoke.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ “42” case housing
- 8.75″ ring gear diameter
- 10 spline pinion
- 12 ring gear bolts
- 3.23 ratio
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Steel Cover For Chrysler 8.25" (Part No.32312)
from
$159.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Fits Chrysler 8.25″
- Steel
Powertrax – Grip LS Traction System (Part No.LS308229)
from
$505.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – Minor Install Kit For Chrysler 89 8.75" Differential (Part No.12007)
from
$111.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ ’89’ case
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Victor Reinz – Drive Axle Shaft Flange Gasket (Part No.71-13861-00)
from
$3.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 27 Spline (Part No.39002)
from
$209.99
USA Standard Gear open spider gear set for Chrysler 8.25″, 27 spline .
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Chrysler 8.25″ 27 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Smooth (Part No.16152)
from
$177.99
Product Features:
See More
- Clutch kit
- Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
- Smooth design
Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)
Driveworks – Differential Pinion Seal (Part No.S-5126)
Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)
Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7290 U/Joint Size (Part No.41008)
from
$246.99
Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. This yoke uses straps. OEM design. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 10 spline
- 7290 u-joint size
- Inside snap ring design
- 2.625″ snap ring span
- 1.125″ cap diameter
- Strap style
Yukon Gear – Standard Open Spider Gear Kit For ’96 And Older 8.25" Chrysler With 27 Spline Axles (Part No.16002)
from
$301.99
Yukon standard open spider gear kit for ’96 and older 8.25″ Chrysler with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Chrysler 8.25″ open differntial with 27 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Popular 1966 Dodge A100 Drivetrains Categories
1966 Dodge A100 Drivetrains
You count on your 1966 Dodge A100 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 183 Drivetrains ranging in price from $2.49 to $919.99, you’re sure to find everything you need for your 1966 Dodge A100.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 12 different brands like Driveworks, National, and Yukon Gear. 1966 Dodge A100 Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 529 extensive product reviews on 1966 Dodge A100 Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 4.8 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1966 Dodge A100 below to get started!
Top-Rated Drivetrains Brands For Your 1966 Dodge A100
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Dodge A100 running right for years to come. In our inventory you’ll find brands like Driveworks, National, Yukon Gear, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1966 Dodge A100 back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1966 Dodge A100, and some of our most reviewed National parts include:
FAQs for 1966 Dodge A100 Drivetrains
What are the most purchased Drivetrains for the 1966 Dodge A100?
Out of 183 Drivetrains for the 1966 Dodge A100, the most popular in our inventory are:
What are the top-rated 1966 Dodge A100 Drivetrains?
Top-rated Drivetrains for your 1966 Dodge A100 based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
