1966 Dodge A100 Drivetrains
More 1966 Dodge A100 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1966 Dodge A100, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1966 Dodge A100 Drivetrains
Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)
USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 27 Spline (Part No.39002)
from
$209.99
USA Standard Gear open spider gear set for Chrysler 8.25″, 27 spline .
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Chrysler 8.25″ 27 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Victor Reinz – Drive Axle Shaft Flange Gasket (Part No.71-13861-00)
from
$3.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Yukon Gear – 8.25" Chrysler Notched Cross Pin (0.801" Diameter) (Part No.33433)
from
$84.99
8.25″ Chrysler notched cross pin shaft for standard open carriers. (0.801″ diameter). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers, or with factory Trac Loc positractions.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Chryler 8.25″
- 0.801″ diameter
- Notched
- Not compatible with Spartan Lockers or Lock Rights
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)
from
$10.99
7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.
Product Features:
See More
Product Features:
- U-Joint strap bolt
- Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
- 7290 u-joint size
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.482163N)
from
$5.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.470898)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Motive Gear – Differential Crush Sleeve (Part No.3507575)
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)
from
$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil
Yukon Gear – 7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25" (Part No.41013)
from
$52.99
7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25″, 8.25″, 8.75″, and 9.25″.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
- 7290 u-joint size
- Includes two straps and four bolts
Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)
Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)
Felpro – Differential Carrier Gasket (Part No.RDS 6583)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)
from
$8.99
Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.
Product Features:
See More
Product Features:
- Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
- 3/8″ x 24 thread
- .866″ long
Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7260 U/Joint Size (Part No.41006)
from
$213.99
Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″
- 10 spline
- 7260 u-joint size
- Inside snap ring design
- 2.125″ snap ring span
- 1.078″ cap diameter
- Strap style
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 8.75" Chrysler & 55P Chevy Power Lok Clutches, Model 20 Also, Posi (Part No.16148)
from
$275.99
8.75″ Chrysler & 55P Chevy Power Lok clutches, Model 20 also, POSI.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Chrysler 8.75″, 1955-1964 GM passenger car and AMC Model 20 Powr Lok positraction
National – Bearings (Part No.A-6)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Steel Cover For Chrysler 8.25" (Part No.32312)
from
$157.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Fits Chrysler 8.25″
- Steel
Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)
from
$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 60
- Fits standard open and Trac Loc applications
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Cross Pin Bolt (Part No.33067)
from
$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.
Product Features:
See More
Product Features:
- Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.25" In A 3.07 Ratio (Part No.24643)
from
$552.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits 2004 and down Chrysler 8.25″
- 3.07 ratio
- 10 bolt holes
- 27 spline pinion
Popular 1966 Dodge A100 Drivetrains Categories
1966 Dodge A100 Drivetrains
You count on your 1966 Dodge A100 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 183 Drivetrains ranging in price from $2.49 to $955.99, you’re sure to find everything you need for your 1966 Dodge A100.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 12 different brands like National, Yukon Gear, and DriveWorks. 1966 Dodge A100 Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 289 extensive product reviews on 1966 Dodge A100 Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Universal Joint Strap Kit with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1966 Dodge A100 below to get started!
Top-Rated Drivetrains Brands For Your 1966 Dodge A100
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Dodge A100 running right for years to come. In our inventory you’ll find brands like National, Yukon Gear, DriveWorks, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Universal Joints. All are waiting to get your 1966 Dodge A100 back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1966 Dodge A100, and some of our most reviewed National parts include:
FAQs for 1966 Dodge A100 Drivetrains
What are the most purchased Drivetrains for the 1966 Dodge A100?
Out of 183 Drivetrains for the 1966 Dodge A100, the most popular in our inventory are:
What are the top-rated 1966 Dodge A100 Drivetrains?
Top-rated Drivetrains for your 1966 Dodge A100 based on customer reviews/ratings are:
from
$6.49
(1)
Differential Carrier Gasket
“It just what i needed for my 74 cuda rear end house which is 8 3/4”
