1966 Chevrolet Malibu Body Parts
Find Your Specific 1966 Chevrolet Malibu Body Parts
Below you will find various in-demand Chevrolet Body Parts, components and accessories for your 1966 Malibu. Advance Auto Parts has popular Malibu parts like Vehicle Doors, Bodies and Fender Parts, Bumpers and more. You’ll also find aftermarket and OEM Body Parts for other Malibu model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 1966 Chevrolet Malibu Body Parts below and start saving instantly.
Popular 1966 Chevrolet Malibu Body Parts Categories
Essential Body Parts for 1966 Chevrolet Malibus
Metro Mould – Quarter Glass Seal (Part No.VS 3)
from
$38.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Side Roll-Up Window Seal, for Hardtops and Convertibles. Two 20 In. sections slide into metal track. No steel insert. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Window Seal (Part No.ALP 5500)
from
$75.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Seal for Convertibles. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 16-JE)
from
$270.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Filler Panel (Part No.GMK403171066)
from
$109.99
New Goodmark Trunk Filler Panel, 2 Door Hardtop
Product Features:
See More
Product Features:
- 2 Door Hardtop
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Reinforcement (Part No.GMK4030517642)
from
$118.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Deck Lid Seal (Part No.GMK403570378)
from
$89.99
New Goodmark Trunk Weatherstrip
Product Features:
See More
Product Features:
- Made Of Rubber
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Windshield Seal (Part No.BT 1)
from
$27.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16 In. wide X 15 Ft. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hood Stop Buffer (Part No.HF 5)
from
$11.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Bumper. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Window Seal (Part No.ALP 5001)
from
$29.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Used on lower leading edge of quarter window. Highly detailed, made with steel cores. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Floor Pan Toe Board (Part No.GMK403037064L)
from
$92.99
New Goodmark Driver Side T Board Patch
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Vent Glass Seal (Part No.WR 2013)
from
$112.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Vent Window Seals. For 2-door hardtop and convertibles. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Quarter Panel (Part No.GMK403069064R)
from
$79.99
New Goodmark Passenger Side Rear Lower Quarter Panel, 7 3/4 Inches High X 29 1/2 Inches Long
Product Features:
See More
Product Features:
- 7 3/4 Inches High X 29 1/2 Inches Long
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Window Sweeper Kit (Part No.WC 2003-20)
from
$326.99
Window Sweeper Kit
AmeriSeal – Flexible Window Glass Run Channel 96" Length (Part No.10871)
from
$18.99
Ameriseal’s 96″ Flexible Window Glass Run Channel For Application- 1960-1967 GM Mid Size Car is an anti-rattle channel made of high-grade rubber. With a sturdy and durable build, you can be sure to have it in a good condition even in the long run. It is designed to be easily installed by anybody by simply replacing any worn-out and old window glass run channel.
Product Features:
See More
Product Features:
- Flexible model
- Flocked lining system
- All-Rubber body
KAI – Bumper/Body Filler Panel (Part No.GMK403102066)
from
$119.99
New Goodmark Front Bumper Filler, Between Bumper And Grille
Product Features:
See More
Product Features:
- Between Bumper And Grille
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Dash Panel Patch (Part No.GMK403052164)
from
$80.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield
Product Features:
See More
Product Features:
- 57 Inch X 2 Inch Between Dash And Windshield
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)
from
$8.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Floor Plug (Part No.SB 48-A)
from
$10.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Floor Plug. For under rear seat. Fits a 1 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – License Plate Bracket (Part No.SB 82)
from
$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Fits a 1/4 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Dorman – Help – Exterior Door Handle Front Left With Keyhole (Part No.88320)
from
$96.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Excellent value – original equipment quality at a lower price
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
Energy Suspension – Body Mount Set (Part No.3.4141G)
from
$232.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Metro Mould – Hardtop Moulding (Part No.RR 5001)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Cowl Seal (Part No.CS 4)
from
$18.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Cowl and Hood Seal. 43-1/2 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Convertible Top Seal (Part No.RR 1611)
from
$356.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Molded Roof Rail Seals, for Convertibles. 5-Piece set includes all right and left side top rail seals and windshield top header seal (HD 728).
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Trunk Crossmember (Part No.GMK403179066)
from
$157.99
New Goodmark Rear Body Cross Bar
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Outer Panel (Part No.GMK403145066R)
from
$239.99
New Goodmark Passenger Side Door Skin
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Trunk Floor (Part No.GMK403173566L)
from
$53.99
New Goodmark Trunk Floor Driver Side Drop Off, Except Wagon/El Camino
Product Features:
See More
Product Features:
- Except Wagon/El Camino
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Grille Emblem Kit (Part No.GMK4031255663S)
from
$28.99
New Goodmark 32 Piece Hood Ornament Hardware Kit, For SS-396 Models
Product Features:
See More
Product Features:
- For SS-396 Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Upgrade your 1966 Chevrolet Malibu with Top-Quality Body Parts
When it comes to maintaining or upgrading your 1966 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Body Parts are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 74 Body Parts for the 1966 Chevrolet Malibu, designed to meet your needs without breaking the bank.
From
Vehicle Door
replacements to
Bodies and Fender Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1966 Chevrolet Malibu at great prices.
Our Body Parts inventory for this model
ranges from just $4.49 to $509.99, with
an average price of $80.47.
Our 74 Body Parts in stock come from 6 trusted brands, so you’re sure to find the right part for your 1966 Chevrolet Malibu without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Chevrolet Malibu, we stock popular OEM and aftermarket Body Parts from top names
like Metro Mould, and more.
Metro Mould Body Parts
start at just $4.49 and boast an impressive 5 stars average rating from customers.
With 5 customer reviews and counting, our 1966 Chevrolet Malibu Body Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1966 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place.
Start shopping confidently below for your 1966 Chevrolet Malibu!
Best-Selling Vehicle Doors for 1966 Chevrolet Malibus
Enhance the driving experience in your Chevrolet with 14 quality Vehicle Door components, starting at $4.49.
Carquest Premium – Door Jamb Switch (Part No.SAA3759)
from
$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Metro Mould – Window Sweeper Kit (Part No.WC 2003-20)
from
$326.99
Window Sweeper Kit
KAI – Door Outer Panel (Part No.GMK403145066R)
from
$239.99
New Goodmark Passenger Side Door Skin
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Door Seal (Part No.LM 12-P)
from
$195.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Front Molded Door Seals with Clips. For 4-door sedans and station wagons. Replaces OEM #4540546/7. Each. is 124-1/2 In. long. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 12-Q)
from
$195.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door sedans only. Replaces OEM #4895420/1. Each. is 115-1/2 In. long. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 12-X)
from
$99.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Door Seals, for 4-Door Hardtops. 67-1/2 In. Long. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 12-W)
from
$99.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Front Door Seals, for 4-Door Hardtops. 76 In. Long. Pair. R & L
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 12-Q/W)
from
$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door station wagons only. Each. is 117-1/2 In. long. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Pillar Post Seal (Part No.CZ 8107)
from
$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Finely crafted and detailed. All of Metro’s Door Lock Pillar Seals are the best available anywhere. They are the best, with molded-in steel cores and superbly detailed outer rubber. Windshield Pillar Post Seals for Convertibles. Two pieces, 25 In. long. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Door Hinge Bolt (Part No.GMK403040264S)
from
$75.99
New Goodmark 24 Piece Door Hinge Bolt Set
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Door Window Seal (Part No.ALP 5500)
from
$75.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Seal for Convertibles. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Window Seal (Part No.ALP 5000-A)
from
$55.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Door Lock Pillar Seal for 4-Door Hardtops. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Window Seal (Part No.ALP 5000)
from
$26.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Used on lower leading edge of quarter window. Highly detailed, made with steel cores. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Stop (Part No.SB 35)
from
$4.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Most Popular 1966 Chevrolet Malibu Bodies and Fender Parts
Customize your Chevrolet with 18 Bodies and Fender Parts products
like Body Mounts,
Weatherstripping, and
Floor Pans, all
priced under $509.99.
Energy Suspension – Body Mount Set (Part No.3.4111R)
from
$148.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Mount Set (Part No.3.4112G)
from
$156.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Quarter Panel (Part No.GMK403160066L)
from
$509.99
New Goodmark Quarter Panel Skin, Driver Side, 30H X 88L
Product Features:
See More
Product Features:
- Driver Side 30 Inches High X 88 Inches Long
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Reinforcement (Part No.GMK4030517643)
from
$155.99
New Goodmark Floor Reinforcement Rear Brace Floor Pan Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Mount Set (Part No.3.4111G)
from
$148.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
KAI – Body Mount Set (Part No.GMK4031990661S)
from
$138.99
New Goodmark Body Mount Hardware, 16 Pieces, Except Convertible, Wagon, El Camino
Product Features:
See More
Product Features:
- 16 Pieces Except Convertible Wagon El Camino
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Reinforcement (Part No.GMK4030517641)
from
$122.99
New Goodmark Floor Reinforcement Front Brace Floor Pan Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Reinforcement (Part No.GMK4030517642)
from
$118.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403051164R)
from
$113.99
New Goodmark Cab Floor Rear Passenger Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated
Product Features:
See More
Product Features:
- Under Rear Seat 30 Inch X 26 Inch EDP Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan (Part No.GMK403051164L)
from
$112.99
New Goodmark Cab Floor Rear Driver Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated
Product Features:
See More
Product Features:
- Under Rear Seat 30 Inch X 26 Inch EDP Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Body Mount Set (Part No.GMK4030990641S)
from
$108.99
New Goodmark Body Mount Set, 10 Bushings, Except Convertible/Wagon/El Camino/SS
Product Features:
See More
Product Features:
- 10 Bushings Except Convertible/Wagon/EL Camino/SS
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Hardtop Moulding (Part No.RR 5001)
from
$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Floor Pan Toe Board (Part No.GMK403037064R)
from
$92.99
New Goodmark Passenger Side T Board Patch
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Floor Pan Toe Board (Part No.GMK403037064L)
from
$92.99
New Goodmark Driver Side T Board Patch
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Dash Panel Patch (Part No.GMK403052164)
from
$80.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield
Product Features:
See More
Product Features:
- 57 Inch X 2 Inch Between Dash And Windshield
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Quarter Panel (Part No.GMK403169066L)
from
$78.99
New Goodmark Driver Side Rear Lower Quarter Panel, 11 1/4 Inches High X 33 1/4 Inches Long
Product Features:
See More
Product Features:
- 11 1/4 Inches High X 33 1/4 Inches Long
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Liftgate Seal (Part No.GMK403171466S)
from
$73.99
New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece Driver And Passenger Side
Product Features:
See More
Product Features:
- 2 Piece Driver And Passenger Side
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Floor Plug (Part No.SB 48-A)
from
$10.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Floor Plug. For under rear seat. Fits a 1 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Top Picks for 1966 Chevrolet Malibu Bumpers
Upgrade Chevrolet Malibus with top-quality Bumpers parts, including 11 OEM and aftermarket selections for your 1966 model.
Metro Mould – License Plate Bracket (Part No.SB 75)
from
$14.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Fits a 1/4 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Bumper/Body Filler Panel (Part No.GMK403102066)
from
$119.99
New Goodmark Front Bumper Filler, Between Bumper And Grille
Product Features:
See More
Product Features:
- Between Bumper And Grille
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Deck Lid Stop Buffer (Part No.SB 34)
from
$28.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Fits lower corner on deck lid. 15/16 In. O.D. 11/16 In. high. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Plug (Part No.HF 73)
from
$22.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rocker Panel Plug. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Stop (Part No.DB 43)
from
$18.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Snap-in style. Two used per car. 1-1/8 In. high X 15/16 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Deck Lid Stop Buffer (Part No.HA 2)
from
$17.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Adjustment Bolt and Bumper. 1 In. diameter rubber head. 5/16 In. thick X 18 threads/inch X 1-3/4 In. long bolt. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Seat Frame Retainer (Part No.SB 62-A)
from
$16.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Seat Bumper. Made with steel core like original. 1-1/2 In. long, 7/16 In. thick. Two used per car. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Bumper (Part No.SM 66)
from
$15.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rocker Arm Cover. Neoprene plug. Fits 1 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Stop (Part No.DB 33)
from
$14.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. 1-1/8 In. high X 15/16 In. wide X 7/8 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Deck Lid Stop Buffer (Part No.HA 3)
from
$7.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Adjustment Bolt and Bumper. 1-1/8 In. diameter rubber head. 5/16 In. thick X 18 threads/inch X 2-1/8 In. long bolt. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – License Plate Bracket (Part No.SB 82)
from
$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Fits a 1/4 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
In-Demand Vehicle Hoods for 1966 Chevrolet Malibus
Select from 3 premium Vehicle Hoods parts for your 1966 Chevrolet Malibu, with prices ranging from $9.49 to $18.99.
Metro Mould – Cowl Seal (Part No.CS 4)
from
$18.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Cowl and Hood Seal. 43-1/2 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hood Stop Buffer (Part No.HF 5)
from
$11.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Bumper. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hood Stop Buffer (Part No.HF 38)
from
$9.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Side Bumper. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Most Sold 1966 Chevrolet Malibu Vehicle Latches and Handles
Explore our best-selling Chevrolet parts for the 1966 Malibu among 2 OEM and aftermarket options starting from $11.29.
KAI – Door Handle Set (Part No.GMK403144066S)
from
$60.99
New Goodmark Driver And Passenger Side Front Outer Door Handle Kit, Includes Handles, Gaskets, Pushbuttons And Hardware
Product Features:
See More
Product Features:
- Includes Handles Gaskets Pushbuttons And Hardware
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Exterior Door Handle Gasket (Part No.UM 2005-100)
from
$11.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door Handle Mounting Pads. 4-Piece Set
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Flat Gasket
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Top-Rated Body Parts Brands For Your 1966 Chevrolet Malibu
Shop for the best-rated brands offering Body Parts and other products for your 1966 Chevrolet Malibus. Below you’ll find some of our best rated Body Parts from Metro Mould, and more. Body Parts from these brands that fit a 1966 Malibu start at just $4.49 and are rated as high as 5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Metro Mould 1966 Chevrolet Malibu Body Parts
When it comes to maintaining or upgrading your 1966 Chevrolet Malibu, using quality Body Parts is essential to ensure durability and a perfect fit. Metro Mould ticks all of those boxes. We offer a wide selection of Metro Mould Body Parts, specifically designed for the 1966 Chevrolet Malibu. With over 36 Metro Mould brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.49, with an average price of just $65.56. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our Metro Mould Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 1966 Chevrolet Malibu Body Parts
Which Body Parts are best-sellers for 1966 Chevrolet Malibus?
Out of 74 Body Parts that fit 1966 Chevrolet Malibus, the following parts are the top sellers:
- Trunk Lock with Key (11871233) – $13.99
- License Plate Bracket (10443005) – $14.99
- Door Jamb Switch (12522316) – $10.49
What’s the price range for 1966 Chevrolet Malibu Body Parts?
Body Part prices for the 1966 Chevrolet Malibu start at $4.49 and go up to $509.99 for the most premium parts.
What’s the average price of a Body Part for a 1966 Chevrolet Malibu?
The average price for Body Parts for the 1966 Chevrolet Malibu is $80.47. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Body Parts for other Chevrolet Malibu model years?
What are the cheapest Body Parts for my 1966 Chevrolet Malibu?
The cheapest 1966 Chevrolet Malibu Body Parts we carry in stock are:
- Door Stop (10443208) – $4.49
- License Plate Bracket (10442951) – $6.99
- Deck Lid Stop Buffer (10442981) – $7.79
- Fuel Door Rubber Stop (10442813) – $8.79
- Hood Stop Buffer (10442802) – $9.49
What are the top-rated Body Parts that fit the 1966 Chevrolet Malibu?
Out of 5 reviews by customers, our 1966 Chevrolet Malibu Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 1966 Chevrolet Malibu and their top-rated products:
- Windshields
- Windshield Seal (10443126) – $27.99
What types of Body Parts do you sell for my 1966 Chevrolet Malibu?
As of 2/5/25, these are some of the most in-demand types of Body Parts for a 1966 Chevrolet Malibu:
Can I get help with 1966 Chevrolet Malibu Body Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Body Parts and more.
What is your return policy for Chevrolet Malibu Body Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
