1966 Chevrolet Malibu Body Parts
More 1966 Chevrolet Malibu Body Parts Categories
If you’re looking for an original Body Parts replacement for a 1966 Chevrolet Malibu, you can search through our selection below. You’ll also find aftermarket and OEM Body Parts to meet your needs.
Essential 1966 Chevrolet Malibu Body Parts
KAI – Trunk Floor Brace (Part No.GMK403074064R)
from
$39.99
New Goodmark Trunk Floor Brace Passenger Side, For Body Bushing
Product Features:
See More
Product Features:
- For Body Bushing
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Window Channel (Part No.VR 2010)
from
$26.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vertical Glass Run Channel. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber flocked to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Quarter Panel (Part No.GMK403160066L)
from
$429.99
New Goodmark Quarter Panel Skin, Driver Side, 30H X 88L
Product Features:
See More
Product Features:
- Driver Side 30 Inches High X 88 Inches Long
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Quarter Glass Seal (Part No.VS 3-J)
from
$63.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Roll-Up Window Seals, for 2-Door Hardtops and Convertibles. Made with steel cores. 14-3/4 In. long. Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Door Hinge Bolt (Part No.GMK403040264S)
from
$71.99
New Goodmark 24 Piece Door Hinge Bolt Set
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Energy Suspension – Body Mount Set (Part No.3.4111R)
from
$148.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Carquest Premium – Trunk Lock (Part No.TLC1056)
from
$157.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Metro Mould – Vent Glass Seal (Part No.WR 2011)
from
$138.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vent Window Seals. Fits many 2-door, 4-door sedans and station wagons (including El Camino). Pair.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Seal (Part No.LM 16-JE)
from
$270.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals. Pair. R&L.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Grille Emblem Kit (Part No.GMK4031255663S)
from
$26.99
New Goodmark 32 Piece Hood Ornament Hardware Kit, For SS-396 Models
Product Features:
See More
Product Features:
- For SS-396 Models
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Door Lock Assembly (Part No.UM 1600-100)
from
$4.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door and Trunk Lock Gasket. 1-3/16 In. O.D. 7/8 In. I.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Flat Gasket
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Hood Stop Buffer (Part No.HF 38)
from
$9.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Side Bumper. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Body Seal Kit (Part No.RKB 2003-101)
from
$90.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro Basic Weatherstrip Kits are designed with parts matched to meet and exceed the specifications of the original part. Basic Kit, for 2-Door Sedan. Door (LM 12-D) Trunk (TK 46-16), Seals. This basic kit from Metro includes the door seals and trunk seal to keep the elements out of your car. Additional important weather seals and detail rubber parts are also available from Metro for many classic and late model vehicles.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
AmeriSeal – Flexible Window Glass Run Channel 96" Length (Part No.10871)
from
$18.99
Ameriseal’s 96″ Flexible Window Glass Run Channel For Application- 1960-1967 GM Mid Size Car is an anti-rattle channel made of high-grade rubber. With a sturdy and durable build, you can be sure to have it in a good condition even in the long run. It is designed to be easily installed by anybody by simply replacing any worn-out and old window glass run channel.
Product Features:
See More
Product Features:
- Flexible model
- Flocked lining system
- All-Rubber body
KAI – Floor Pan (Part No.GMK403051164R)
from
$121.99
New Goodmark Cab Floor Rear Passenger Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated
Product Features:
See More
Product Features:
- Under Rear Seat 30 Inch X 26 Inch EDP Coated
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Stop (Part No.GMK403240368S)
from
$15.99
New Goodmark 4 Piece Rubber Door Bumper Kit
Product Features:
See More
Product Features:
- Made Of Rubber
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Trunk Floor (Part No.GMK403173566R)
from
$54.99
New Goodmark Trunk Floor Passenger Side Drop Off, Except Wagon/El Camino
Product Features:
See More
Product Features:
- Except Wagon/El Camino
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)
from
$8.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
KAI – Dash Panel Patch (Part No.GMK403052164)
from
$79.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield
Product Features:
See More
Product Features:
- 57 Inch X 2 Inch Between Dash And Windshield
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Door Outer Panel (Part No.GMK403145066R)
from
$264.99
New Goodmark Passenger Side Door Skin
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Window Sweeper Kit (Part No.WC 2003-20)
from
$326.99
Window Sweeper Kit
KAI – Trunk Crossmember (Part No.GMK403179066)
from
$154.99
New Goodmark Rear Body Cross Bar
Product Features:
See More
Product Features:
- Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Metro Mould – Tailgate Seal (Part No.TG 14)
from
$92.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Tailgate Seals that all have that show winning look and fit. Our Tailgate Seals have a perfect fit. Station Wagon Tailgate Seal. 91-1/2 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Deck Lid Stop Buffer (Part No.HA 2)
from
$17.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Adjustment Bolt and Bumper. 1 In. diameter rubber head. 5/16 In. thick X 18 threads/inch X 1-3/4 In. long bolt. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Convertible Top Seal (Part No.RR 1609)
from
$356.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Convertible Top Rail Kit. 7-Piece set includes all right and left side top rail seals and windshield top header seal (HD 729).
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense material to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Convertible Top Seal (Part No.HD 728)
from
$23.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Header Seal for Convertibles. 42-3/8 In. Long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- There’s no need to slam when you use Metro SUPERsoft weatherstripping products
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Door Stop (Part No.DB 43)
from
$18.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Snap-in style. Two used per car. 1-1/8 In. high X 15/16 In. long. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Floor Plug (Part No.SB 48-A)
from
$10.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Floor Plug. For under rear seat. Fits a 1 In. hole. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Popular 1966 Chevrolet Malibu Body Parts Categories
1966 Chevrolet Malibu Body Parts
You count on your 1966 Chevrolet Malibu to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 62 Body Parts ranging in price from $4.49 to $429.99, you’re sure to find everything you need for your 1966 Chevrolet Malibu.
Brands matter. If you want to shop a specific Body Parts brand, we stock 6 different brands like ACDelco, Metro Mould, and Energy Suspension. 1966 Chevrolet Malibu Body Parts start as low as $4.49!
One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 5 extensive product reviews on 1966 Chevrolet Malibu Body Parts.
Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1966 Chevrolet Malibu below to get started!
Top-Rated Body Parts Brands For Your 1966 Chevrolet Malibu
Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Chevrolet Malibu running right for years to come. In our inventory you’ll find brands like ACDelco, Metro Mould, Energy Suspension, and even more.
Popular Metro Mould Body Parts
You’ll find popular Metro Mould brand products across Bodies and Fender Parts. All are waiting to get your 1966 Chevrolet Malibu back on the road. Some of the top-rated Metro Mould products in these categories are:
FAQs for 1966 Chevrolet Malibu Body Parts
What are the most purchased Body Parts for the 1966 Chevrolet Malibu?
Out of 62 Body Parts for the 1966 Chevrolet Malibu, the most popular in our inventory are:
