1966 Chevrolet K10 Pickup Fuel and Emissions Systems
More 1966 Chevrolet K10 Pickup Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1966 Chevrolet K10 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1966 Chevrolet K10 Pickup Fuel and Emissions Systems
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10105FLT)
Flowtech – Reducer w/O2 Sensor Fitting (Part No.10110FLT)
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-814)
from
$20.99
Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.
Product Features:
See More
Product Features:
- Cover Hole In Block When Mech. Fuel Pump Is Removed
Dorman – Help – Fuel Pump Push Rod (Part No.03875)
from
$15.29
Our Fuel Pump Push Rod is constructed from high-quality materials for a long service life. Replacement helps restore the fuel pump to proper operation so that your vehicle runs smoothly.
Product Features:
See More
Product Features:
- Durable steel construction
- Direct replacement for a proper fit
- No special tools required
- Easy to install
Competition Cams – FUEL PUMP PUSH ROD, CHEVY 1 EA (Part No.4607)
from
$53.99
When a high pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods for various applications.
Product Features:
See More
Product Features:
- Lightweight tubing with bronze tip for steel cams
- 5.75″ Length
- Eliminates wear at the fuel pump lobe often caused by a stock fuel pump pushrod
Carquest Premium – Locking Fuel Cap (Part No.10572)
from
$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Locking Fuel Cap: 10582, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10582)
from
$19.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Carquest Premium – Fuel Cap (Part No.10800)
from
$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Holley – Mechanical Fuel Pump (Part No.12-454-20)
from
$212.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170 gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Required
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- 3/4in.-16 Inlet And Outlet Ports
- Fittings Not Included
Carquest Premium – Mechanical Fuel Pump 1542663: Includes Gasket (Part No.1542663)
from
$53.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Mechanical Fuel Pump 1542661: Includes Gasket (Part No.1542661)
from
$203.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
KAI – Fuel Sending Unit (Part No.FSU010185)
from
$59.99
New Platinum Pro Fuel Sending Unit Without Vent Line For In-Cab Tank
Product Features:
See More
Product Features:
- Without Vent Line, In Cab Tank
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Fuel Tank Sending Unit FG05JCQ: Includes Wiring Harness (Part No.FG05JCQ)
from
$81.99
Carquest Premium fuel tank sending units are built to meet or exceed Original Equipment (O.E.) specifications for fit, form and function. Carquest Premium fuel tank sending units are supplied with the wiring harness and gaskets or seals when required for the application. All sending units are precision-tested ensuring accurate readings at any fuel level. Carquest Premium fuel tank sending units are engineered with superior quality components to provide the longest life and are backed up by an industry-leading warranty.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- All sending units are 100% performance tested
- Includes installation gaskets or seals where applicable
KAI – Fuel Sending Unit (Part No.GMK4142755631)
from
$64.99
New Goodmark Fuel Sending Unit Without Vent Line For In-Cab Tank
Product Features:
See More
Product Features:
- Without Vent Line
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Cardone – Smog Air Pump (Part No.32-130)
from
$198.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.
Product Features:
See More
Product Features:
- 100% testing of all units guarantees reliable performance every time
- High temperature grease extends bearing life, resulting in longer pump life
- New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)
from
$16.99
Mr. Gasket announces a fuel pump mounting plate to dress up the fuel pump area of your engine. This chrome plated mounting plate, for the 265-400 cu. in. Chevrolet small block engine, is ideal for mounting a stock OEM pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.
Product Features:
See More
Product Features:
- Precision Cut To Cover Pump
- Gasket Included
Popular 1966 Chevrolet K10 Pickup Fuel and Emissions Systems Categories
1966 Chevrolet K10 Pickup Fuel and Emissions Systems
You count on your 1966 Chevrolet K10 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 23 Fuel and Emissions Systems ranging in price from $2.99 to $211.99, you’re sure to find everything you need for your 1966 Chevrolet K10 Pickup.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 12 different brands like Felpro, Delphi, and Carquest Premium. 1966 Chevrolet K10 Pickup Fuel and Emissions Systems start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 217 extensive product reviews on 1966 Chevrolet K10 Pickup Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Reducer w/O2 Sensor Fitting with 5.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1966 Chevrolet K10 Pickup below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1966 Chevrolet K10 Pickup
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Chevrolet K10 Pickup running right for years to come. In our inventory you’ll find brands like Felpro, Delphi, Carquest Premium, and even more.
Popular Felpro Fuel and Emissions Systems
You’ll find popular Felpro brand products across Fuel Pumps. All are waiting to get your 1966 Chevrolet K10 Pickup back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1966 Chevrolet K10 Pickup, and some of our most reviewed parts include:
FAQs for 1966 Chevrolet K10 Pickup Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1966 Chevrolet K10 Pickup?
Out of 23 Fuel and Emissions Systems for the 1966 Chevrolet K10 Pickup, the most popular in our inventory are:
What are the top-rated 1966 Chevrolet K10 Pickup Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1966 Chevrolet K10 Pickup based on customer reviews/ratings are:
from
$55.99
(1)
Reducer w/O2 Sensor Fitting
“This product helps keep you legal. Easy installation and good price.”
