from

$1.99

Our Brake Spring Hold Down Pin is constructed from high-quality materials for a prolonged service life. Replacement restores the brake system to proper operation, helping to ensure road safety.

Product Features:

Corrosion-resistant for long-lasting durability against harsh road and weather conditions
Heat-resistant to withstand high temperatures generated by the brake system
Direct replacement for a proper fit
Manufactured to strict engineering quality standards

from

$1.99

Our Brake Spring Hold Down Pin Clip is constructed from high-quality materials for a prolonged service life. Replacement restores the brake system to proper operation, helping to ensure road safety.

Product Features:

Corrosion-resistant for long-lasting durability against harsh road and weather conditions
Heat-resistant to withstand high temperatures generated by the brake system
Direct replacement for a proper fit
Manufactured to strict engineering quality standards

from

$15.99

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

Each unit is 100% new, providing consistent performance when servicing your brake system
Easy to transfer for on-the-spot master cylinder bleeding
Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
Easy to clean to ensure no cross contamination
Durability for long lasting performance

from

$8.49

The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

New Goodmark Pair Of Park Brake Cable Connectors

Product Features:

Pair
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$62.99

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

Meets or exceeds OE design for superior stopping power
Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
Proper harmonic design and balance helps to reduce brake noise and vibration
Optimal metallurgy and casting thickness to preventing warping

from

$13.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Wheel cylinders match what was originally installed on the vehicle.
Each cylinder matches OE for form, fit and function and material
Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
All bleeder screws are coated providing extra protection
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$21.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$8.29

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:

This part matches Original Equipment (OE) quality specifications
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured to restrain high tolerances with quality materials
Direct replacement for a proper fit
Helps deliver a quieter, more efficient braking system

from

$10.99

This parking brake strut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this parking brake strut blade is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this strut is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:

This part matches Original Equipment (OE) quality specifications
Manufactured with quality materials to suppress high stress levels
Maintains safe movement and effective stopping performance

from

$19.99

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span and maximizes performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$19.99

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Increases the life span and maximizes performance of the Drum Brakes
Manufactured with quality materials to suppress high stress levels
Corrosion resistant coating for long-lasting durability against harsh roads

from

$3.79

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:

This part matches Original Equipment (OE) quality specifications
Fast and efficient replacement
Eliminates heat and corrosion deterioration

from

$43.49

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$72.99

Carquest Professional Platinum brake pads are the optimal braking solution that provide an unmatched level of performance and reliability. These brake pads are engineered by an Original Equipment Manufacturer (O.E.M.) that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We use an industry-leading number of friction formulations for maximum performance and extended pad life on each application. Carquest Professional Platinum brake pads also utilize a patented 4-layer HEX shim, now upgraded with aramid fibers, to provide quiet braking and reduce shim wear. These brake pads are also supplied with coated brake hardware and caliper pin grease for nearly every application. Carquest Professional Platinum brake pads are the ideal choice when looking for shorter stopping distances, quiet braking and longer-lasting brakes.

Product Features:

Industry-leading number of application specific formulations for maximum performance and extended pad life
On-vehicle testing similar to original equipment tests
Patented 4-Layer HEX Shim Technology provides quiet braking
HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
Burnishing compound allows for a faster break-in of pads and rotors
PTFE coated hardware and caliper pin grease included for nearly every application
Powder-coated backing plate prevents corrosion

from

$115.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$175.99

Prior Automotive Remanufactured Brake Boosters offer elite performance and reliable stopping power whenever and wherever you need it. Prior Automotive is renowned in the Remanufacturing industry for quality. Since Prior’s early days as a rebuilder, its attention to detail and obsession with quality has made the Prior name special. We are even able to improve upon the original engineering of many brake boosters! From quality control protocols, proprietary engineering methods not duplicated by any other remanufacturer, assembly, all the way to packaging – NO ONE DOES IT QUITE LIKE PRIOR!

Product Features:

Every remanufactured unit is inspected and tested to meet or exceed original vehicle performance specifications
100% new seals, O-rings, and critical wear parts replaced
Preventative anti-rust solution used to increase life of every booster
O.E. quality diaphragms and check-valves
Extreme resistance to wear
Proprietary assembly techniques
Over 60 years of remanufacturing experience

from

$7.29

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:

Increases the Life Span and Improves the Performance of the Drum Brakes
Eliminates heat and corrosion deterioration
Restores brakes to like-new performance

from

$9.99

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

This part matches Original Equipment (OE) quality specifications
Contains all the necessary hardware for easy installation
Manufactured to restrain high tolerances with quality materials
Helps deliver a quieter, more efficient braking system
Restores brakes to like-new performance

from

$10.99

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

This part matches Original Equipment (OE) quality specifications
Contains all the necessary hardware for easy installation
Manufactured to restrain high tolerances with quality materials
Helps deliver a quieter, more efficient braking system
Restores brakes to like-new performance

from

$7.99

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance.

Product Features:

Manufactured to restrain high tolerances with quality materials
Increases the Life Span and Improves the Performance of the Drum Brakes
Coated to eliminate heat and corrosion deterioration
Restores brakes to like-new performance
This part matches Original Equipment (OE) quality specifications

from

$28.49

This kit is designed to match the original parts and hardware required to repair the brake master cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this kit is designed to match the original parts and hardware required to repair the brake master cylinder on specified vehicles
Ideal solution – this kit is a reliable replacement for original master cylinder components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$69.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All aluminum castings are “hard anodized”
All iron castings are coated to prevent rust
Manufacturers all major components in house.
Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
All machining done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
Assembly is done in clean room insuring no contamination is introduced into final assembly.
All assemblies are dated coded for 100% accurate trace-ability.
Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance

from

$40.99

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

from

$75.99

This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:

Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
Strict specifications – made to meet rigorous SAE International standards

from

$48.49

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

from

$57.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All aluminum castings are “”hard anodized””
All iron castings are coated to prevent rust
Manufacturers all major components in house.
Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
All machining done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
Assembly is done in clean room insuring no contamination is introduced into final assembly.
All assemblies are dated coded for 100% accurate trace-ability.
Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance