1966 Chevrolet Chevelle Performance Distributors
More 1966 Chevrolet Chevelle Performance Distributors
Find your specific 1966 Chevrolet Chevelle original or aftermarket Performance Distributors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1966 Chevrolet Chevelle Performance Distributors
PerTronix – D700700 Advance Spring Kit Flame-Thrower Billet Distributor (Part No.D700700)
from
$20.99
Performance mechanical advance springs.
Product Features:
See More
Product Features:
- PerTronix D700700 Advance Spring Kit Flame-Thrower Billet Distributor
- Performance mechanical advance springs.
PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)
from
$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.
Product Features:
See More
Product Features:
- PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
- Precision machined chromoly weights and center plate.
PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)
from
$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi
Product Features:
See More
Product Features:
- PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
- Made from hi-performance 60 KV rated alkyd molding compound.
PerTronix – D660701 Rotor Flame-Thrower Billet Distributor (Part No.D660701)
from
$18.99
Rotor for Flame-Thrower cast distributors. Premium rotor with brass contact
Product Features:
See More
Product Features:
- PerTronix D660701 Rotor Flame-Thrower Billet Distributor
- Rotor for Flame-Thrower cast distributors
PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)
from
$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi
Product Features:
See More
Product Features:
- PerTronix D4062 Flame-Thrower HEI Distributor Rotor Blue
- Made from hi-performance 60 KV rated alkyd molding compound.
PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)
from
$30.99
Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.
Product Features:
See More
Product Features:
- PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
- Premium quality wire harness and capacitor.
Mr. Gasket – Distributor Hold-Down Clamp (Part No.1009)
from
$9.99
Add sparkle to your engine with this chromed hold-down clamp. With bolt and gasket. Serrations on the bottom prevent distributor and magneto rotation for accurate timing.
Product Features:
See More
Product Features:
- Rolled Edges For Strength
- Ideal For Magnetos
- Ideal For Ignition Distributor
MSD Ignition – Distributor Cap and Rotor; MSD/GM V8 Points (Part No.8442)
from
$49.49
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Fits MSD/GM V8 Distributors
- Made from high quality materials
- Brass terminals
- High dielectric properties
Accel – Distributor Cap And Rotor Kit (Part No.8123)
Accel – Distributor Cap And Rotor Kit (Part No.8124)
MSD Ignition – Distributor Cap; Alkyd; MSD Chevy V8 Distributor (Part No.8437)
from
$48.49
All MSD extra duty distributor caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.
Product Features:
See More
Product Features:
- Update The GM Points Cap w/MSD Performance
- High Quality; Voltage Insulating Material
- Low Resistance
- Performance replacement part
MSD Ignition – Distributor; Chevy V8; Billet with Vacuum Advance (Part No.8361)
from
$399.99
The street Pro-Billet is a popular route for people looking for proven race performance for their street cars. A vacuum advance canister provides economy and the proven MSD mechanical advance gives you the opportunity to dial-in a timing curve to fit your needs. Inside, an oversized steel shaft is QPQ coated for low friction and rides in a sealed ball bearing at the top of the distributor with an extra-long sintered bushing at the bottom. This combination keeps the shaft steady creating accurate spark delivery at any RPM. The street Pro-Billet relies on a magnetic pick-up to trigger the MSD Ignition control which delivers the powerful sparks to the coil. This pick-up is extremely accurate and never needs adjusting.
Product Features:
See More
Product Features:
- Designed for street/performance use w/mechanical or vacuum adv.
- Must Be Used w/An MSD Ignition Control
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
MSD Ignition – Distributor; Crank Trigger; Chevy V8 Low Profile (Part No.84697)
from
$384.99
The unique design of these distributors fit tight intake systems while still transferring the high voltage of the MSD racing ignition to the spark plugs. The high voltage carrying capabilities are the result of several features which have been designed to fit the tight quarters and still accurately deliver sparks.
Product Features:
See More
Product Features:
- Designed to fit low in the block to clear firewall/intake combos
- Supplied w/Bronze Gear
- Supplied w/Large Diameter HEI Style Distributor Cap And Rotor
- Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Oversized Polished Steel Shaft w/QPQ Coating
MSD Ignition – Distributor; Tall Block Chevy V8; Low Profile (Part No.8558)
from
$471.99
The unique design of these distributors fit tight intake systems while still transferring the high voltage of the MSD racing ignition to the spark plugs. The high voltage carrying capabilities are the result of several features which have been designed into these low-profile distributors. This includes a large diameter cap with wide spaced terminals and an injection molded Rynite rotor with thick vanes to stir up the air inside the cap. The high dielectric Rynite base also prevents arcing to the billet housing. Since these distributors are used primarily in racing applications, an oversized steel shaft is responsible for delivering the sparks. This shaft is QPQ coated for friction reduction and receives guidance from a sealed ball-bearing assembly and an extra long, precision sintered bushing for smooth operation. Note: must be used with an MSD crank trigger and ignition control.
Product Features:
See More
Product Features:
- Designed to fit low in the block to clear firewall/intake combos
- Supplied w/Bronze Gear
- Supplied w/Large Diameter HEI Style Distributor Cap And Rotor
- Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Oversized Polished Steel Shaft w/QPQ Coating
MSD Ignition – Distributor; Billet GM HEI (Part No.8365)
from
$594.99
The Chevrolet HEI distributor is a favorite for muscle cars, street rods and even circle track racers. The integrated coil keeps under mount wiring clean, and for race cars, the idea of running one wire to the distributor keeps things simple. However, when it comes to performance, the stock HEI falls short. MSD answers the need for a strong, accurate and high performance HEI with our Pro-Billet HEI. The distributor is supplied with our digital HEI module and coil so there is plenty of spark energy combined with improved dwell and timing control. Tig welded on top of the distributor shaft is MSD’s adjustable centrifugal advance assembly. Three sets of springs and four stop bushings let you dial in up to 24 different timing curves to match your driving needs. Plus, there’s a vacuum advance for those concerned with economy. All of this is assembled around a precision and great looking CNC machined housing.
Product Features:
See More
Product Features:
- Complete performance HEI distributor upgrade for Chevy V8 engines
- Supplied w/Brass Terminal Distributor Cap And Rotor
- Full Spark Energy Output To 9000 Rpm
- An 8.5 amp; single spark; inductive discharge ignition module
- Includes MSD PN[83647] and MSD HEI Coil PN[8225]
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
Popular 1966 Chevrolet Chevelle Performance Distributors Categories
1966 Chevrolet Chevelle Performance Distributors
Maybe you’re in the middle of a full rebuild of that 1966 Chevrolet Chevelle. Maybe you just need a couple of Performance Distributors. Either way, Advance Auto Parts has 13 different Performance Distributors in our inventory ranging from $9.99 to $668.99. That means you can find the exact parts or products you need to keep that 1966 Chevrolet Chevelle running smoothly.
Performance Distributors are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1966 Chevrolet Chevelle. Mr. Gasket, MSD Ignition, and PerTronix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Distributors for your 1966 Chevrolet Chevelle, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Distributors to keep your 1966 Chevrolet Chevelle rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Distributors Brands To Make Your 1966 Chevrolet Chevelle Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1966 Chevrolet Chevelle demands trusted brand parts and products to keep it running. Many trusted brands of Performance Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your Chevelle the best it can be. Be sure to browse some of our top Performance Distributors brands and parts.
Popular Accel Performance Distributors
We carry Accel parts in our stock across Performance Distributor Cap and Rotor Kits categories, plus more. For a 1966 Chevrolet Chevelle, our most popular Accel Performance Distributors include:
Top 1966 Chevrolet Chevelle Performance Distributors from MSD Ignition
MSD Ignition products are another trusted brand when it comes to Performance Distributors for your 1966 Chevrolet Chevelle. Popular MSD Ignition parts include:
from
$49.49
(7)
Distributor Cap and Rotor; MSD/GM V8 Points
Performance Distributor Cap and Rotor Kits
FAQs for 1966 Chevrolet Chevelle Performance Distributors
What are the most purchased Performance Distributors for the 1966 Chevrolet Chevelle?
Out of 13 Performance Distributors for the 1966 Chevrolet Chevelle, the most popular in our inventory are:
from
$20.99
This product is not rated
D700700 Advance Spring Kit Flame-Thrower Billet Distributor
Performance Distributor Components
from
$18.99
This product is not rated
D660701 Rotor Flame-Thrower Billet Distributor
Performance Distributor Components
