1966 Buick Wildcat Steering and Chassis Parts
More 1966 Buick Wildcat Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1966 Buick Wildcat, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1966 Buick Wildcat Steering and Chassis Parts
National – Multi Purpose Seal (Part No.7013S)
from
$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Lares – New Steering Coupling Assembly (Part No.201)
from
$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More
Lares – Remanufactured Power Steering Pump (Part No.2017)
from
$263.99
Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)
from
$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Hardware included for easier installation (where applicable)
Carquest Premium – Repair Fittings (Part No.35010)
from
$20.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Energy Suspension – Strut Rod Bushing Set (Part No.3.7114R)
from
$22.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
National – Multi Purpose Seal (Part No.PSK-1)
from
$31.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
PWR – New Power Steering Gear (Part No.61-5431)
from
$918.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Power Steering Gear Boxes are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- PWR does not consolidate turn ratios, ensuring OE quality replacement performance
- Includes: NEW housings, internal components, ball bearings, shafts, bushings, and are precision machined and matched for optimum performance and duarability
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Input and Output Shaft Spilne Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Supplied with a New Output Shaft Nut and all required Installation Seals and Washers
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
MOOG – Stabilizer Bar Bushing Kit (Part No.K8204)
from
$9.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Rare Parts – Ball Joint (Part No.RP10156)
from
$129.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
MOOG – Tie Rod End (Part No.ES314RL)
from
$67.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Powercraft – Pump Seal Kit (Part No.8755)
from
$34.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.7095)
from
$30.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Steering Gear Major Seal Kit (Part No.7860)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Rare Parts – Tie Rod Sleeve (Part No.RP25522)
from
$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Rare Parts – Self-Lock Nut Kit (Part No.RP16153)
from
$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
See More
National – Multi Purpose Seal (Part No.351267)
from
$8.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Rare Parts – Radius Rod Bushing (Part No.RP16687)
from
$76.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces wander
- Reduces tire wear
- Improves handling while breaking
Rare Parts – Sway Bar Bushing (Part No.RP15311)
from
$28.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Powercraft – Steering Gear Complete Rebuild Kit (Part No.7857)
from
$128.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Energy Suspension – High Performance Sway Bar End Link Kit with Hardware (Part No.9.8117R)
from
$25.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Popular 1966 Buick Wildcat Steering and Chassis Parts Categories
1966 Buick Wildcat Steering and Chassis Parts
You count on your 1966 Buick Wildcat to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 58 Steering and Chassis Parts ranging in price from $2.99 to $918.99, you’re sure to find everything you need for your 1966 Buick Wildcat.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 13 different brands like Imperial, Carquest Premium, and Cardone. 1966 Buick Wildcat Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 725 extensive product reviews on 1966 Buick Wildcat Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars and Tie Rod End Adjusting Sleeve with 5.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1966 Buick Wildcat below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1966 Buick Wildcat
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Buick Wildcat running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.
Popular Energy Suspension Steering and Chassis Parts
You’ll find popular Energy Suspension brand products across Sway Bars. All are waiting to get your 1966 Buick Wildcat back on the road. Some of the top-rated Energy Suspension products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1966 Buick Wildcat, and some of our most reviewed Imperial parts include:
FAQs for 1966 Buick Wildcat Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1966 Buick Wildcat?
Out of 58 Steering and Chassis Parts for the 1966 Buick Wildcat, the most popular in our inventory are:
from
$7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
What are the top-rated 1966 Buick Wildcat Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1966 Buick Wildcat based on customer reviews/ratings are:
from
$31.49
(10)
Tie Rod End Adjusting Sleeve
“It’s a tie rod adjusting sleeve….what more is there to say? It is built really well though, and not flimsy or junky looking. I got this for a 1994 C”
from
$52.99
(8)
New Steering Coupling Assembly
“Again in my nova fit perfect. The engine was out so the install was a lot easier. Tighten up my steering.”
