1966 AMC Rogue Performance and Racing Products
Find Your Specific 1966 AMC Rogue Performance and Racing Products
Below you will find various in-demand AMC Performance and Racing Products, components and accessories for your 1966 Rogue. Advance Auto Parts has popular Rogue parts like Performance Engines, Performance Fuel Systems, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Rogue model years. Select a category of 1966 AMC Rogue Performance and Racing Products below and start saving instantly.
Popular 1966 AMC Rogue Performance and Racing Products Categories
Essential Performance and Racing Products for 1966 AMC Rogues
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2003)
from
$19.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3760001)
from
$614.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Upgrade your 1966 AMC Rogue with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1966 AMC Rogue, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your AMC or enhancing its overall performance, Performance and Racing Products are key to keeping your Rogue functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Performance and Racing Products for the 1966 AMC Rogue, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Fuel Systems
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1966 AMC Rogue at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $12.99 to $858.99, with
an average price of $298.01.
Our 21 Performance and Racing Products in stock come from 5 trusted brands, so you’re sure to find the right part for your 1966 AMC Rogue without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 AMC Rogue, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, K&N, Holley, and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
K&N and Holley also bring quality to the table, with Performance and Racing Products available starting at $19.99, and at an average 4.8 stars rating.
With 135 customer reviews and counting, our 1966 AMC Rogue Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1966 AMC Rogue is always ready to roll. We’re committed to providing you with everything you need to keep your Rogue in top shape, all in one place.
Start shopping confidently below for your 1966 AMC Rogue!
Best-Selling Performance Engines for 1966 AMC Rogues
Enhance the driving experience in your AMC with 10 quality Performance Engine components, starting at $12.99.
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Competition Cams – High Energy 218/218 Hydraulic Flat Cam K-Kit for AMC 290-401 (Part No.K10-202-4)
from
$858.99
High Energy 218/218 Hydraulic Flat Cam K-Kit for AMC 290-401
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit for AMC 290-401 (Part No.CL10-600-5)
from
$656.99
Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit for AMC 290-401
Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit for AMC 290-401 (Part No.CL10-202-4)
from
$618.99
High Energy 218/218 Hydraulic Flat Cam and Lifter Kit for AMC 290-401
Competition Cams – Magnum 224/224 Hydraulic Flat Cam and Lifter Kit for AMC 290-401 (Part No.CL10-203-4)
from
$598.99
Magnum 224/224 Hydraulic Flat Cam and Lifter Kit for AMC 290-401
Competition Cams – Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7994-16)
from
$281.99
Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod Set
Competition Cams – Engine Valve Spring Kit (Part No.940-16)
from
$111.99
Engine Valve Spring Kit
Competition Cams – Flat 1 Piece Guide Plate Set AMC 290-401/Pontiac V8 with 5/16" Pushrod 7/16" Stud (Part No.4851-8)
from
$31.99
Flat 1 Piece Guide Plate Set AMC 290-401/Pontiac V8 with 5/16" Pushrod 7/16" Stud
Competition Cams – Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod (Part No.7994-1)
from
$16.99
Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod
Competition Cams – Engine Valve Spring (Part No.940-1)
from
$12.99
Engine Valve Spring
Most Popular 1966 AMC Rogue Performance Fuel Systems
Customize your AMC with 4 Performance Fuel Systems products
like Performance Carburetors, all
priced under $819.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Top Picks for 1966 AMC Rogue Performance Ignition Products
Upgrade AMC Rogues with top-quality Performance Ignition Products parts, including 3 OEM and aftermarket selections for your 1966 model.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
In-Demand Performance Oil Filters for 1966 AMC Rogues
Select from 1 premium Performance Oil Filters parts for your 1966 AMC Rogue.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2003)
from
$19.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Most Sold 1966 AMC Rogue Performance Distributors
Explore our best-selling AMC parts for the 1966 Rogue among 1 OEM and aftermarket options starting from $614.99.
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3760001)
from
$614.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Top-Rated Performance and Racing Products Brands For Your 1966 AMC Rogue
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1966 AMC Rogues. Below you’ll find some of our best rated Performance and Racing Products from Mallory, K&N, and Holley, and more. Performance and Racing Products from these brands that fit a 1966 Rogue start at just $19.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1966 AMC Rogue Performance and Racing Products
When it comes to maintaining or upgrading your 1966 AMC Rogue, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1966 AMC Rogue. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular K&N 1966 AMC Rogue Performance and Racing Products
K&N auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1966 AMC Rogue owner should feel confident when installing genuine K&N parts in their vehicle. To ensure the best fit and performance for your 1966 Rogue, Advance Auto Parts carries a full inventory of 1 K&N Performance and Racing Products. Plus you will be keeping your AMC in peak condition while saving money because prices on these K&N Performance and Racing Products range up to $19.99, plus, with more than 9 customer reviews and an impressive 4.8 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$19.99
(9)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“5 Star Review”
FAQs for 1966 AMC Rogue Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1966 AMC Rogues?
Out of 21 Performance and Racing Products that fit 1966 AMC Rogues, the following parts are the top sellers:
- Intake Manifold Bolts (6120970) – $18.29
- Thermocap Radiator Cap (10648773) – $55.99
- Unilite Ignition Module (17350025) – $95.99
What’s the price range for 1966 AMC Rogue Performance and Racing Products?
Performance and Racing Product prices for the 1966 AMC Rogue start at $12.99 and go up to $858.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1966 AMC Rogue?
The average price for Performance and Racing Products for the 1966 AMC Rogue is $298.01. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Performance and Racing Products for my 1966 AMC Rogue?
The cheapest 1966 AMC Rogue Performance and Racing Products we carry in stock are:
- Engine Valve Spring (50286866) – $12.99
- Hi-Tech 7.950" Long, .080" Wall, 5/16" Diameter Pushrod (50289739) – $16.99
- Intake Manifold Bolts (6120970) – $18.29
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (6120011) – $19.99
- Flat 1 Piece Guide Plate Set AMC 290-401/Pontiac V8 with 5/16" Pushrod 7/16" Stud (50288083) – $31.99
What are the top-rated Performance and Racing Products that fit the 1966 AMC Rogue?
Out of 135 reviews by customers, our 1966 AMC Rogue Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1966 AMC Rogue and their top-rated products:
- Performance Fuel Systems
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
- Prem Street Carbs (Avengers) (17120683) – $716.99
- Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (6340019) – $699.99
- Performance Oil Filters
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
- Prem Street Carbs (Avengers) (17120683) – $716.99
- Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (6340019) – $699.99
- Performance Radiators
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
- Prem Street Carbs (Avengers) (17120683) – $716.99
- Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (6340019) – $699.99
What types of Performance and Racing Products do you sell for my 1966 AMC Rogue?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1966 AMC Rogue:
Can I get help with 1966 AMC Rogue Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about AMC Performance and Racing Products and more.
What is your return policy for AMC Rogue Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new AMC Rogue Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
