1965 Studebaker Daytona Steering and Chassis Parts

Essential Steering and Chassis Parts for 1965 Studebaker Daytonas

Rare Parts – Tie Rod End (Part No.RP25446)

Tie Rod End

from

$83.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

National – Multi Purpose Seal (Part No.473234)

Multi Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.LM67010)

Bearings

from

$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25522)

Tie Rod Sleeve

from

$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Driveworks – Taper Bearing Set (Part No.S-A-2)

Taper Bearing Set

from

$8.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Tie Rod End Adjusting Sleeve

from

$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Tie Rod End Adjusting Sleeve

from

$28.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Engineered to meet or exceed OE Performance
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)

Steering Tie Rod End Adjusting Sleeve

from

$21.49
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
See More

Upgrade your 1965 Studebaker Daytona with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1965 Studebaker Daytona, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Studebaker or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Daytona functioning at its best. At Advance Auto Parts, we offer a wide selection of 9 Steering and Chassis Parts for the 1965 Studebaker Daytona, designed to meet your needs without breaking the bank. From Tie Rod replacements to Gear Boxes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1965 Studebaker Daytona at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $4.99 to $83.99, with an average price of $24.72. Our 9 Steering and Chassis Parts in stock come from 5 trusted brands, so you’re sure to find the right part for your 1965 Studebaker Daytona without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Studebaker Daytona, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Driveworks Moog, and more. Driveworks Steering and Chassis Parts start at just $4.99 and boast an impressive 4 stars average rating from customers. With 190 customer reviews and counting, our 1965 Studebaker Daytona Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters and more to make sure your 1965 Studebaker Daytona is always ready to roll. We’re committed to providing you with everything you need to keep your Daytona in top shape, all in one place. Start shopping confidently below for your 1965 Studebaker Daytona!

Best-Selling Tie Rods for 1965 Studebaker Daytonas

Enhance the driving experience in your Studebaker with 4 quality Tie Rod components, starting at $21.49.

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Tie Rod End Adjusting Sleeve

from

$28.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Engineered to meet or exceed OE Performance
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)

Steering Tie Rod End Adjusting Sleeve

from

$21.49
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
See More

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Tie Rod End Adjusting Sleeve

from

$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

Rare Parts – Tie Rod End (Part No.RP25446)

Tie Rod End

from

$83.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Most Popular 1965 Studebaker Daytona Gear Boxes

Customize your Studebaker with 1 Gear Boxes products like Steering Gear Housing Seals, all priced under $11.99.

National – Multi Purpose Seal (Part No.473234)

Multi Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Top Picks for 1965 Studebaker Daytona Steering Hardware

Upgrade Studebaker Daytonas with top-quality Steering Hardware parts, including 1 OEM and aftermarket selections for your 1965 model.

Rare Parts – Tie Rod Sleeve (Part No.RP25522)

Tie Rod Sleeve

from

$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

In-Demand Steering Knuckles for 1965 Studebaker Daytonas

Select from 1 premium Steering Knuckles parts for your 1965 Studebaker Daytona.

Driveworks – Taper Bearing Set (Part No.S-A-2)

Taper Bearing Set

from

$8.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Most Sold 1965 Studebaker Daytona Power Steering Parts

Explore our best-selling Studebaker parts for the 1965 Daytona among 2 OEM and aftermarket options starting from $4.99.

National – Bearings (Part No.LM67010)

Bearings

from

$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Top-Rated Steering and Chassis Parts Brands For Your 1965 Studebaker Daytona

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1965 Studebaker Daytonas. Below you’ll find some of our best rated Steering and Chassis Parts from Driveworks and Moog, and more. Steering and Chassis Parts from these brands that fit a 1965 Daytona start at just $4.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Driveworks 1965 Studebaker Daytona Steering and Chassis Parts

When it comes to maintaining or upgrading your 1965 Studebaker Daytona, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Steering and Chassis Parts, specifically designed for the 1965 Studebaker Daytona. With over 3 Driveworks brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $11.82. Plus, with over 85 customer reviews and an average rating of 4 stars, you can trust that our Driveworks Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Steering Tie Rod End Adjusting Sleeve
from
$21.49

(38)

Steering Tie Rod End Adjusting Sleeve

“Easy and durable, don’t listen to the naysayers”

Taper Bearing Set
from
$8.99

(47)

Taper Bearing Set

“Good fit”

Taper Bearing Cup
from
$4.99
This product is not rated

Taper Bearing Cup

“”

Popular Moog 1965 Studebaker Daytona Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1965 Studebaker Daytona owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1965 Daytona, Advance Auto Parts carries a full inventory of 1 Moog Steering and Chassis Parts. Plus you will be keeping your Studebaker in peak condition while saving money because prices on these Moog Steering and Chassis Parts range up to $28.49, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Tie Rod End Adjusting Sleeve
from
$28.49

(10)

Tie Rod End Adjusting Sleeve

“It’s a tie rod adjusting sleeve….what more is there to say? It is built really well though, and not flimsy or junky looking. I got this for a 1994 C”

FAQs for 1965 Studebaker Daytona Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1965 Studebaker Daytonas?

Out of 9 Steering and Chassis Parts that fit 1965 Studebaker Daytonas, the following parts are the top sellers:

What’s the price range for 1965 Studebaker Daytona Steering and Chassis Parts?

Steering and Chassis Part prices for the 1965 Studebaker Daytona start at $4.99 and go up to $83.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1965 Studebaker Daytona?

The average price for Steering and Chassis Parts for the 1965 Studebaker Daytona is $24.72. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Studebaker Daytona model years?

Yes, we currently carry Steering and Chassis Parts for 4 model years of Studebaker Daytonas between 1962 and 1966. Steering and Chassis Parts are bought most frequently for the following model years: 1966, 1964, 1963, and 1962.

What are the cheapest Steering and Chassis Parts for my 1965 Studebaker Daytona?

The cheapest 1965 Studebaker Daytona Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 1965 Studebaker Daytona?

Out of 190 reviews by customers, our 1965 Studebaker Daytona Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1965 Studebaker Daytona and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 1965 Studebaker Daytona?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1965 Studebaker Daytona:

Can I get help with 1965 Studebaker Daytona Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Studebaker Steering and Chassis Parts and more.

What is your return policy for Studebaker Daytona Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Studebaker Daytona Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.