1965 Porsche 356SC Brake Parts

Essential Brake Parts for 1965 Porsche 356SCs

Pagid – Premium Copper Free Brake Pads (Part No.N101025379PAG)

Premium Copper Free Brake Pads

from

$29.74
The strategic concept of HELLA PAGID is so successful because it meets the expectations of customers and drivers at many different levels. As you know: Our products comply with the OE quality standards and are subjected to the highest of standards when it comes to safety, quality and future proofness. This is no doubt important, but it is not all. Our goal is to always be one step ahead of the market. This is achieved by engaging in continuous dialog with the automotive industry. This allows us to incorporate consumer preferences and the experience of the industry in terms of braking performance, wear characteristics and comfort directly into the ongoing development of our name-brand products. PAGIDS exceptional ability to match high expectations with reality is achieved with products that are in every way equal to the great challenges of modern traffic conditions. This is due to the fact that PAGIDS research and development is grounded in Germany and the Centers for Excellence production plants (Germany, France, England, etc.) operate in accordance with the exceptional engineering specifications laid down in Germany.

Product Features:
  • Copper Free Formulation
  • A powder coat finish gives a clean look and protects it from corrosion
  • Specifically developed and calibrated for each vehicle application
  • The under-layer provides excellent shear strength and thermal barrier resistance
  • Disc cracking resistance and noise prevention
  • The backing plates for brake pads meet the most demanding requirements PAGID BRAKE PAD BROCHURE
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000670582ZIC)

Coat-Z Brake Disc (Rotor)

from

$70.56
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Sebro – Coated Brake Rotor (Part No.N100022427SEB)

Coated Brake Rotor

from

$166.76
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

ATE – Brake Caliper Repair Kit (Part No.N105022429ATE)

Brake Caliper Repair Kit

from

$28.46
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

ATE – Original OE Formuld Brake Pad Set (Part No.N101025379ATE)

Original OE Formuld Brake Pad Set

from

$29.74
ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking

Product Features:
  • OE engineered brake system technology assures optimum fit and performance
  • Advanced friction vehicle specific formulations
  • Reduced dusting and extend pad life
  • Application matched premium quality friction grade
  • Underlayer design helps reduce noise, vibration and harshness
  • Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation
See More

FTE – FTE Brake Hose (Part No.N700082188FTE)

FTE Brake Hose

from

$24.60
FTE automotive has decades of experience in the development and production of brake hoses for OEMs and the spare parts market. FTE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:
  • Excellent pulse strength for use on vehicles with ESP, ABS, DSC and ASR
  • Very high ozone resistance, temperature change resistance and so a long service life
  • Low water permeation and so extended service life of the brake fluid
  • Use of robust hose valve connections and additional safety and shrink-fitted hoses in various materials.
See More

ATE – ATE Brake Master Cylinder (Part No.N300021614ATE)

ATE Brake Master Cylinder

from

$249.93
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

Upgrade your 1965 Porsche 356SC with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1965 Porsche 356SC, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Brake Parts are key to keeping your 356SC functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Brake Parts for the 1965 Porsche 356SC, designed to meet your needs without breaking the bank. From Brake Hose replacements to Brake Master Cylinders upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1965 Porsche 356SC at great prices. Our Brake Parts inventory for this model ranges from just $24.60 to $249.93, with an average price of $85.68. Our 7 Brake Parts in stock come from 5 trusted brands, so you’re sure to find the right part for your 1965 Porsche 356SC without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1965 Porsche 356SC is always ready to roll. We’re committed to providing you with everything you need to keep your 356SC in top shape, all in one place. Start shopping confidently below for your 1965 Porsche 356SC!

Best-Selling Brake Hoses for 1965 Porsche 356SCs

Enhance the driving experience in your Porsche with 1 quality Brake Hose components, starting at $24.60.

FTE – FTE Brake Hose (Part No.N700082188FTE)

FTE Brake Hose

from

$24.60
FTE automotive has decades of experience in the development and production of brake hoses for OEMs and the spare parts market. FTE brake hoses are suitable for all brake fluids (DOT 3, DOT 4, DOT 4 LV, DOT 5.1)

Product Features:
  • Excellent pulse strength for use on vehicles with ESP, ABS, DSC and ASR
  • Very high ozone resistance, temperature change resistance and so a long service life
  • Low water permeation and so extended service life of the brake fluid
  • Use of robust hose valve connections and additional safety and shrink-fitted hoses in various materials.
See More

Most Popular 1965 Porsche 356SC Brake Master Cylinders

Customize your Porsche with 1 Brake Master Cylinders products like Brake Master Cylinders, all priced under $249.93.

ATE – ATE Brake Master Cylinder (Part No.N300021614ATE)

ATE Brake Master Cylinder

from

$249.93
As the basis for a standardized ATE concept for future tandem master cylinders, ATE has developed a new plunger generation which has many technical enhancements and advantages.

Product Features:
  • Short closing paths
  • Low volume uptake
  • High efficiency
  • Low throttling / after-suction resistance
  • Low pressure differential between primary and secondary circuits
  • Good bleedability
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
  • Central valve version suitable for ABS
  • Compact design – ideal for installation in small spaces
  • Reduced weight – by roughly 20% compared to conventional central valve technology
  • Fewer components – almost half as many as compared to conventional technologies
  • Modular system – diameters from 14.29 to 31.75mm and strokes up to 46mm
  • Low volume uptake – minimized elastic deformations due to smaller seals
  • Sealing cups supported in the housing – robustness against soiling and wear; longer life
  • Cr6-free surfaces for vehicles built from July 2007 (as required by law)
See More

Top Picks for 1965 Porsche 356SC Brake Kits

Upgrade Porsche 356SCs with top-quality Brake Kits parts, including 1 OEM and aftermarket selections for your 1965 model.

ATE – Brake Caliper Repair Kit (Part No.N105022429ATE)

Brake Caliper Repair Kit

from

$28.46
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

In-Demand Brake Rotors and Drums for 1965 Porsche 356SCs

Select from 2 premium Brake Rotors and Drums parts for your 1965 Porsche 356SC, with prices ranging from $70.56 to $166.76.

Sebro – Coated Brake Rotor (Part No.N100022427SEB)

Coated Brake Rotor

from

$166.76
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000670582ZIC)

Coat-Z Brake Disc (Rotor)

from

$70.56
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Most Sold 1965 Porsche 356SC Brake Pads and Shoes

Explore our best-selling Porsche parts for the 1965 356SC among 2 OEM and aftermarket options starting from $29.74.

ATE – Original OE Formuld Brake Pad Set (Part No.N101025379ATE)

Original OE Formuld Brake Pad Set

from

$29.74
ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking

Product Features:
  • OE engineered brake system technology assures optimum fit and performance
  • Advanced friction vehicle specific formulations
  • Reduced dusting and extend pad life
  • Application matched premium quality friction grade
  • Underlayer design helps reduce noise, vibration and harshness
  • Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation
See More

Pagid – Premium Copper Free Brake Pads (Part No.N101025379PAG)

Premium Copper Free Brake Pads

from

$29.74
The strategic concept of HELLA PAGID is so successful because it meets the expectations of customers and drivers at many different levels. As you know: Our products comply with the OE quality standards and are subjected to the highest of standards when it comes to safety, quality and future proofness. This is no doubt important, but it is not all. Our goal is to always be one step ahead of the market. This is achieved by engaging in continuous dialog with the automotive industry. This allows us to incorporate consumer preferences and the experience of the industry in terms of braking performance, wear characteristics and comfort directly into the ongoing development of our name-brand products. PAGIDS exceptional ability to match high expectations with reality is achieved with products that are in every way equal to the great challenges of modern traffic conditions. This is due to the fact that PAGIDS research and development is grounded in Germany and the Centers for Excellence production plants (Germany, France, England, etc.) operate in accordance with the exceptional engineering specifications laid down in Germany.

Product Features:
  • Copper Free Formulation
  • A powder coat finish gives a clean look and protects it from corrosion
  • Specifically developed and calibrated for each vehicle application
  • The under-layer provides excellent shear strength and thermal barrier resistance
  • Disc cracking resistance and noise prevention
  • The backing plates for brake pads meet the most demanding requirements PAGID BRAKE PAD BROCHURE
See More

FAQs for 1965 Porsche 356SC Brake Parts

Which Brake Parts are best-sellers for 1965 Porsche 356SCs?

Out of 7 Brake Parts that fit 1965 Porsche 356SCs, the following parts are the top sellers:

What’s the price range for 1965 Porsche 356SC Brake Parts?

Brake Part prices for the 1965 Porsche 356SC start at $24.60 and go up to $249.93 for the most premium parts.

What’s the average price of a Brake Part for a 1965 Porsche 356SC?

The average price for Brake Parts for the 1965 Porsche 356SC is $85.68. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Porsche 356SC model years?

Yes, we currently carry Brake Parts for 1 model years of Porsche 356SCs between 1964 and 1964. Brake Parts are bought most frequently for the following model years: 1964.

What are the cheapest Brake Parts for my 1965 Porsche 356SC?

The cheapest 1965 Porsche 356SC Brake Parts we carry in stock are:

What types of Brake Parts do you sell for my 1965 Porsche 356SC?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1965 Porsche 356SC:

Can I get help with 1965 Porsche 356SC Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Brake Parts and more.

What is your return policy for Porsche 356SC Brake Parts?

Advance Auto Parts keeps returns simple. For new Porsche 356SC Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.