1965 Pontiac Tempest Body Parts

Essential Body Parts for 1965 Pontiac Tempests

KAI – Hood Hinge Spring (Part No.GMK401021164)

Hood Hinge Spring

from

$15.99
New Goodmark Driver Or Passenger Side Hood Hinge Spring

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Handle Set (Part No.GMK403244068S)

Door Handle Set

from

$64.99
New Goodmark Driver And Passenger Side Front Outer Door Handle Kit, Includes Handles, Gaskets, Pushbuttons And Hardware

Product Features:
  • Includes Handles Gaskets Pushbuttons And Hardware
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Vent Window Latch (Part No.GMK4031419661P)

Vent Window Latch

from

$47.99
New Goodmark Driver And Passenger Side Pair Of Vent Window Handles With Roll Pins And Washers

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK403250068L)

Floor Pan

from

$534.99
New Goodmark Cab Floor, Driver Side, Full Length, 30 Inch X 62 Inch, EDP-Coated

Product Features:
  • Driver Side Full Length 30 Inch X 62 Inch EDP-Coated
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Window Channel (Part No.VR 2011)

Window Channel

from

$50.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vertical Glass Run Channel. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber flocked to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

AutoCraft – Window Handle (Part No.76912)

Window Handle

from

$9.99
Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:
  • Ideal replacement – this window crank handle matches the fit and function of the original equipment component
  • Durable construction – this window crank handle is made of durable material to withstand extended use
  • Easy to install – this window crank requires no special tools to install
  • Versatile design – this window crank handle is suitable for use in various locations in the vehicle
See More

Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)

Fuel Door Rubber Stop

from

$8.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Seal (Part No.LM 12-D)

Door Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Seal, with Clips and Molded Ends. For 2-Door Sedans. Replaces OEM #4892622/3. Pair.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Vent Glass Seal (Part No.WR 2009-B)

Vent Glass Seal

from

$105.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vent Window Seals for 2-Door Hartdtops and Convertibles. Replaces OEM part # 9712506/7 and 9712524/5. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Cowl Seal (Part No.CS 4)

Cowl Seal

from

$18.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Cowl and Hood Seal. 43-1/2 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Stop (Part No.SB 35)

Door Stop

from

$4.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Deck Lid Seal (Part No.GMK403070364)

Deck Lid Seal

from

$29.99
New Goodmark Trunk Weatherstrip, Fits All A-Body Models And X Body Models Except Hatchback Or Wagon

Product Features:
  • Fits All A-Body Models And X Body Models Except Hatchback Or Wagon
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Deck Lid Striker (Part No.GMK4030721642)

Deck Lid Striker

from

$27.99
New Goodmark Deck Lid Striker, For All Models Except Wagon, Bolts To Striker Support

Product Features:
  • For All Models Except Wagon Bolts To Striker Support
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Hinge (Part No.GMK4031401662L)

Door Hinge

from

$132.99
New Goodmark Driver Side Lower Door Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Dash Panel Patch (Part No.GMK403052164)

Dash Panel Patch

from

$80.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield

Product Features:
  • 57 Inch X 2 Inch Between Dash And Windshield
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Frame Crossmember (Part No.GMK403079064)

Frame Crossmember

from

$142.99
New Goodmark Rear Body Crossmember

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Locksmart – Door Lock Kit (Part No.DL15800)

Door Lock Kit

from

$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • All door locks are perfectly matched to the original for precision installation
  • Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

KAI – Floor Reinforcement (Part No.GMK4030517642)

Floor Reinforcement

from

$118.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Molding Clip (Part No.GMK4030711642)

Rocker Molding Clip

from

$7.99
New Goodmark Pinchweld Moulding Clip, Use As Required

Product Features:
  • Use As Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)

Door Hinge Bushing Assortment - 4 Sizes

from

$7.99
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Metro Mould – License Plate Bracket (Part No.SB 82)

License Plate Bracket

from

$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Fits a 1/4 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Deck Lid Latch (Part No.GMK404270559)

Deck Lid Latch

from

$32.99
New Goodmark Trunk Latch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Trunk Floor Brace (Part No.GMK403074064L)

Trunk Floor Brace

from

$36.99
New Goodmark Trunk Floor Brace Driver Side, For Body Bushing

Product Features:
  • For Body Bushing
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Quarter Glass Seal (Part No.VS 3)

Quarter Glass Seal

from

$38.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Side Roll-Up Window Seal, for Hardtops and Convertibles. Two 20 In. sections slide into metal track. No steel insert. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Carquest – Door Jamb Switch (Part No.S208)

Door Jamb Switch

from

$11.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our parts are 100% tested to verify both mechanical and electrical switching performance.
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

KAI – Floor Pan Toe Board (Part No.GMK403037064R)

Floor Pan Toe Board

from

$92.99
New Goodmark Passenger Side T Board Patch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Sill Plate Screw (Part No.GMK4030575644S)

Door Sill Plate Screw

from

$11.99
New Goodmark 8 Piece Sill Plate Screw Kit

Product Features:
  • 8 Piece
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Hinge Bolt (Part No.GMK403040264S)

Door Hinge Bolt

from

$75.99
New Goodmark 24 Piece Door Hinge Bolt Set

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Upgrade your 1965 Pontiac Tempest with Top-Quality Body Parts

When it comes to maintaining or upgrading your 1965 Pontiac Tempest, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Body Parts are key to keeping your Tempest functioning at its best. At Advance Auto Parts, we offer a wide selection of 87 Body Parts for the 1965 Pontiac Tempest, designed to meet your needs without breaking the bank. From Vehicle Door replacements to Vehicle Latches and Handles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1965 Pontiac Tempest at great prices. Our Body Parts inventory for this model ranges from just $1.79 to $678.99, with an average price of $70.52. Our 87 Body Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 1965 Pontiac Tempest without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Pontiac Tempest, we stock popular OEM and aftermarket Body Parts from top names like Dorman Locksmart, and more. Dorman Body Parts start at just $7.99 and boast an impressive 4 stars average rating from customers. With 272 customer reviews and counting, our 1965 Pontiac Tempest Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1965 Pontiac Tempest is always ready to roll. We’re committed to providing you with everything you need to keep your Tempest in top shape, all in one place. Start shopping confidently below for your 1965 Pontiac Tempest!

Best-Selling Vehicle Doors for 1965 Pontiac Tempests

Enhance the driving experience in your Pontiac with 20 quality Vehicle Door components, starting at $1.79.

Dorman – Help – Door Striker Bolt Kit – 7/16 In.-14 (Part No.38428)

Door Striker Bolt Kit - 7/16 In.-14

from

$11.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
  • Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Locksmart – Door Lock Kit (Part No.DL15800)

Door Lock Kit

from

$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • All door locks are perfectly matched to the original for precision installation
  • Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)

Door Hinge Bushing Assortment - 4 Sizes

from

$7.99
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)

Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height

from

$1.79
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3759)

Door Jamb Switch

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Door Sill Plate Screw (Part No.GMK4030575644S)

Door Sill Plate Screw

from

$11.99
New Goodmark 8 Piece Sill Plate Screw Kit

Product Features:
  • 8 Piece
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Seal (Part No.LM 12-P)

Door Seal

from

$195.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Front Molded Door Seals with Clips. For 4-door sedans and station wagons. Replaces OEM #4540546/7. Each. is 124-1/2 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Seal (Part No.LM 12-Q)

Door Seal

from

$195.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door sedans only. Replaces OEM #4895420/1. Each. is 115-1/2 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Hinge (Part No.GMK4030401642R)

Door Hinge

from

$155.99
New Goodmark Passenger Side Front Lower Door Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Pillar Post Seal (Part No.CZ 8108)

Door Pillar Post Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Finely crafted and detailed. All of Metro’s Door Lock Pillar Seals are the best available anywhere. They are the best, with molded-in steel cores and superbly detailed outer rubber. Windshield Pillar Post Seals for Convertibles. Two pieces, 24-1/2 In. long. Pair.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Seal (Part No.LM 12-Q/W)

Door Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door station wagons only. Each. is 117-1/2 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Seal (Part No.LM 12-D)

Door Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Seal, with Clips and Molded Ends. For 2-Door Sedans. Replaces OEM #4892622/3. Pair.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Seal (Part No.GMK4030412641P)

Door Seal

from

$76.99
New Goodmark Driver And Passenger Side Pair Of Black Door Jamb Windlaces To Repair Two Doors On Sedan And Wagon Models

Product Features:
  • Pair
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Hinge Bolt (Part No.GMK403040264S)

Door Hinge Bolt

from

$75.99
New Goodmark 24 Piece Door Hinge Bolt Set

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Window Seal (Part No.ALP 5500)

Door Window Seal

from

$75.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Seal for Convertibles. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Hinge (Part No.GMK404340261S)

Door Hinge

from

$39.99
New Goodmark Door Hinge Repair Kit To Repair 2 Front Doors

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Window Seal (Part No.ALP 5001)

Door Window Seal

from

$29.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Used on lower leading edge of quarter window. Highly detailed, made with steel cores. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Lock Striker (Part No.GMK403060664)

Door Lock Striker

from

$17.99
New Goodmark Door Lock Striker, Allen Head Bolt With Collar

Product Features:
  • Allen Head Bolt With Collar
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Mirror Mounting Pad (Part No.MP 989-J)

Door Mirror Mounting Pad

from

$16.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Remote Mirror Pad. 1-1/8 In. wide X 4-1/4 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Stop (Part No.SB 35)

Door Stop

from

$4.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Most Popular 1965 Pontiac Tempest Vehicle Latches and Handles

Customize your Pontiac with 9 Vehicle Latches and Handles products like Exterior Door Handles, Interior Door Handles, and Window Handles, all priced under $75.99.

KAI – Window Crank Handle (Part No.GMK403042165)

Window Crank Handle

from

$22.99
New Goodmark Window Crank Handle With Chrome Knob

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Handle Remote (Part No.GMK4020443671P)

Door Handle Remote

from

$75.99
New Goodmark Driver And Passenger Side Pair Of Door Latch Mechanical Relays, For Vehicles With Standard Interior

Product Features:
  • For Vehicles With Standard Interior
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Handle Set (Part No.GMK403044064S)

Door Handle Set

from

$65.99
New Goodmark Door Handle Out Frt Driver Side/Passenger Side Kit Includes Handles/Gaskets/Pushbuttons/Hardware

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Handle Set (Part No.GMK403244068S)

Door Handle Set

from

$64.99
New Goodmark Driver And Passenger Side Front Outer Door Handle Kit, Includes Handles, Gaskets, Pushbuttons And Hardware

Product Features:
  • Includes Handles Gaskets Pushbuttons And Hardware
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Vent Window Latch (Part No.GMK401041962L)

Vent Window Latch

from

$47.99
New Goodmark Driver Side Vent Window Handle, For All Except 1966-67 A-Body Sport Models

Product Features:
  • For All Except 1966-67 A-Body Sport Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Deck Lid Latch (Part No.GMK404270559)

Deck Lid Latch

from

$32.99
New Goodmark Trunk Latch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Crank Handle C-Clip (Part No.GMKHWB2404)

Crank Handle C-Clip

from

$13.99
New Goodmark Box Of 100 Horsesh Type Door And Window Crank Handle Clips

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Interior Door Handle (Part No.GMK401044165)

Interior Door Handle

from

$13.99
New Goodmark Driver Or Passenger Side Inside Door Handle, For All Models Except Paddle Style Or Camaro/Firebird With Deluxe Interior

Product Features:
  • For All Models Except Paddle Style Or Camaro/Firebird With Deluxe Interior
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Exterior Door Handle Gasket (Part No.UM 2005-100)

Exterior Door Handle Gasket

from

$11.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door Handle Mounting Pads. 4-Piece Set

Product Features:
  • Jet black to match the color of the original part
  • Flat Gasket
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Top Picks for 1965 Pontiac Tempest Vehicle Windows

Upgrade Pontiac Tempests with top-quality Vehicle Windows parts, including 1 OEM and aftermarket selections for your 1965 model.

Metro Mould – Window Channel (Part No.VR 2010)

Window Channel

from

$26.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vertical Glass Run Channel. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber flocked to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

In-Demand Vehicle Hoods for 1965 Pontiac Tempests

Select from 6 premium Vehicle Hoods parts for your 1965 Pontiac Tempest, with prices ranging from $5.99 to $73.99.

KAI – Hood Hinge (Part No.GMK401021063R)

Hood Hinge

from

$73.99
New Goodmark Passenger Side Hood Hinge Assembly

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GMK401021063L)

Hood Hinge

from

$73.99
New Goodmark Driver Side Hood Hinge Assembly

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Cowl Seal (Part No.CS 4)

Cowl Seal

from

$18.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Cowl and Hood Seal. 43-1/2 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Hood Hinge Spring (Part No.GMK401021164)

Hood Hinge Spring

from

$15.99
New Goodmark Driver Or Passenger Side Hood Hinge Spring

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Hood Stop Buffer (Part No.HF 5)

Hood Stop Buffer

from

$11.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Cowl Seal (Part No.GMK4030386644P)

Cowl Seal

from

$5.99
New Goodmark Pair Of Driver And Passenger Side Cowl Vent Gaskets

Product Features:
  • Pair
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Most Sold 1965 Pontiac Tempest Bodies and Fender Parts

Explore our best-selling Pontiac parts for the 1965 Tempest among 22 OEM and aftermarket options starting from $4.99.

KAI – Deck Lid Seal (Part No.GMK403070364)

Deck Lid Seal

from

$29.99
New Goodmark Trunk Weatherstrip, Fits All A-Body Models And X Body Models Except Hatchback Or Wagon

Product Features:
  • Fits All A-Body Models And X Body Models Except Hatchback Or Wagon
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A-Pillar Trim Plug (Part No.GMK4010453621S)

A-Pillar Trim Plug

from

$14.99
New Goodmark 12 Piece Trim Panel Mounting Plug Set

Product Features:
  • 12 Piece
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel (Part No.GMK433060064L)

Quarter Panel

from

$678.99
New Goodmark Driver Side Quarter Panel Skin, 29 Inches High X 85 Inches Long

Product Features:
  • 29 Inches High X 85 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel (Part No.GMK433060064R)

Quarter Panel

from

$678.99
New Goodmark Passenger Side Quarter Panel Skin Piece, 29 Inches High X 85 Inches Long

Product Features:
  • 29 Inches High X 85 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Reinforcement (Part No.GMK4030517643)

Floor Reinforcement

from

$155.99
New Goodmark Floor Reinforcement Rear Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.GMK403047064R)

Rocker Panel

from

$148.99
New Goodmark Rocker Panel Passenger Side Outer

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.GMK403047064L)

Rocker Panel

from

$143.99
New Goodmark Rocker Panel Driver Side Outer

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Frame Crossmember (Part No.GMK403079064)

Frame Crossmember

from

$142.99
New Goodmark Rear Body Crossmember

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Reinforcement (Part No.GMK4030517641)

Floor Reinforcement

from

$122.99
New Goodmark Floor Reinforcement Front Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Reinforcement (Part No.GMK4030517642)

Floor Reinforcement

from

$118.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK403051164R)

Floor Pan

from

$113.99
New Goodmark Cab Floor Rear Passenger Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated

Product Features:
  • Under Rear Seat 30 Inch X 26 Inch EDP Coated
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK403051164L)

Floor Pan

from

$112.99
New Goodmark Cab Floor Rear Driver Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated

Product Features:
  • Under Rear Seat 30 Inch X 26 Inch EDP Coated
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Hardtop Moulding (Part No.RR 5000)

Hardtop Moulding

from

$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Rocker Panel (Part No.GMK403046064L)

Rocker Panel

from

$93.99
New Goodmark Rocker Panel Driver Side Inner

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan Toe Board (Part No.GMK403037064R)

Floor Pan Toe Board

from

$92.99
New Goodmark Passenger Side T Board Patch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan Toe Board (Part No.GMK403037064L)

Floor Pan Toe Board

from

$92.99
New Goodmark Driver Side T Board Patch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Dash Panel Patch (Part No.GMK403052164)

Dash Panel Patch

from

$80.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield

Product Features:
  • 57 Inch X 2 Inch Between Dash And Windshield
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Liftgate Seal (Part No.GMK403071464S)

Liftgate Seal

from

$73.99
New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece, Except Wagon/El Camino

Product Features:
  • 2 Piece Except Wagon/El Camino
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Molding Clip (Part No.GMK4030711642)

Rocker Molding Clip

from

$7.99
New Goodmark Pinchweld Moulding Clip, Use As Required

Product Features:
  • Use As Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Spare Tire Stop (Part No.GMK4010726621)

Spare Tire Stop

from

$7.99
New Goodmark Spare Tire Hold Down Bracket

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Plug (Part No.GMK4030512641A)

Floor Plug

from

$4.99
New Goodmark Galvanized Floor Drain Plug With Notch

Product Features:
  • With Notch
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Plug (Part No.GMK403051264A)

Floor Plug

from

$4.99
New Goodmark Galvanized Floor Drain Plug, Use As Required

Product Features:
  • Use As Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Top-Rated Body Parts Brands For Your 1965 Pontiac Tempest

Shop for the best-rated brands offering Body Parts and other products for your 1965 Pontiac Tempests. Below you’ll find some of our best rated Body Parts from Dorman and Locksmart, and more. Body Parts from these brands that fit a 1965 Tempest start at just $7.99 and are rated as high as 4 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 1965 Pontiac Tempest Body Parts

When it comes to maintaining or upgrading your 1965 Pontiac Tempest, using quality Body Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Body Parts, specifically designed for the 1965 Pontiac Tempest. With over 2 Dorman brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.99, with an average price of just $9.99. Plus, with over 12 customer reviews and an average rating of 4 stars, you can trust that our Dorman Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Door Striker Bolt Kit - 7/16 In.-14
from
$11.99

(5)

Door Striker Bolt Kit – 7/16 In.-14

“Works well with new door latch.”

Door Hinge Bushing Assortment - 4 Sizes
from
$7.99

(7)

Door Hinge Bushing Assortment – 4 Sizes

“Returned because I didn’t need them.”

Popular Locksmart 1965 Pontiac Tempest Body Parts

Locksmart auto parts is one of the highest quality Body Part brands in the market. Any 1965 Pontiac Tempest owner should feel confident when installing genuine Locksmart parts in their vehicle. To ensure the best fit and performance for your 1965 Tempest, Advance Auto Parts carries a full inventory of 1 Locksmart Body Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Locksmart Body Parts range up to $24.29, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

Door Lock Kit
from
$24.29

(4)

Door Lock Kit

“Easy to install. The lock kit works great too”

FAQs for 1965 Pontiac Tempest Body Parts

Which Body Parts are best-sellers for 1965 Pontiac Tempests?

Out of 87 Body Parts that fit 1965 Pontiac Tempests, the following parts are the top sellers:

What’s the price range for 1965 Pontiac Tempest Body Parts?

Body Part prices for the 1965 Pontiac Tempest start at $1.79 and go up to $678.99 for the most premium parts.

What’s the average price of a Body Part for a 1965 Pontiac Tempest?

The average price for Body Parts for the 1965 Pontiac Tempest is $70.52. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Pontiac Tempest model years?

Yes, we currently carry Body Parts for 9 model years of Pontiac Tempests between 1961 and 1970. Body Parts are bought most frequently for the following model years: 1970, 1969, 1968, 1967, 1966, 1964, 1963, 1962, and 1961.

What are the cheapest Body Parts for my 1965 Pontiac Tempest?

The cheapest 1965 Pontiac Tempest Body Parts we carry in stock are:

What types of Body Parts do you sell for my 1965 Pontiac Tempest?

Can I get help with 1965 Pontiac Tempest Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Body Parts and more.

What is your return policy for Pontiac Tempest Body Parts?

Advance Auto Parts keeps returns simple. For new Pontiac Tempest Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.