1965 Pontiac Safari Brake Parts

Essential 1965 Pontiac Safari Brake Parts

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-71325)

Vacuum Brake Booster: Without Master Cylinder

from

$83.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3759)

Door Jamb Switch

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA5433)

Brake Hydraulic Hose

from

$27.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Wearever – Brake Hold-Down Spring (Part No.1150-2)

Brake Hold-Down Spring

from

$5.99
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
See More

Dorman – First Stop – Brake Spring Hold Down Pin (Part No.HW1109)

Brake Spring Hold Down Pin

from

$1.99
Our Brake Spring Hold Down Pin is constructed from high-quality materials for a prolonged service life. Replacement restores the brake system to proper operation, helping to ensure road safety.

Product Features:
  • Corrosion-resistant for long-lasting durability against harsh road and weather conditions
  • Heat-resistant to withstand high temperatures generated by the brake system
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards
See More

Carquest Wearever – Brake Spring Hold-Down Pin (Part No.1109-2)

Brake Spring Hold-Down Pin

from

$5.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Maintains safe movement and effective stopping performance
  • Restores brakes to like-new performance
See More

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

Brake Hold-Down Spring Cup

from

$3.79
The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Fast and efficient replacement
  • Eliminates heat and corrosion deterioration
See More

Felpro – Drive Axle Shaft Flange Gasket (Part No.13831)

Drive Axle Shaft Flange Gasket

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Pik-a-Nut – Spindle Nut Kit, 3/4-20 Contents: Nut, Washer And Cotter Pin (Part No.304993.1)

Spindle Nut Kit, 3/4-20 Contents: Nut, Washer And Cotter Pin

from

$5.49
This spindle lock nut kit includes a new spindle nut and the necessary hardware designed to match the factory equipment.

Product Features:
  • Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles
  • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
  • Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Brake Cable Connector (Part No.GMK4030519642P)

Brake Cable Connector

from

$15.99
New Goodmark Pair Of Park Brake Cable Connectors

Product Features:
  • Pair
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA7564)

WHEEL CYLINDER

from

$45.49
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Wearever – WHEEL CYLINDER (Part No.WCA13368)

WHEEL CYLINDER

from

$28.49
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD3)

Brake Pads: Reliable and Dependable Stopping

from

$32.49
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Wearever – Brake Shoes (Part No.S9)

Brake Shoes

from

$34.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Drum Brake Wheel Cylinder Repair Kit (Part No.WCKA13620)

Drum Brake Wheel Cylinder Repair Kit

from

$6.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA46348)

Wheel Cylinder Kit

from

$5.99
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA3600)

Wheel Cylinder Kit

from

$8.49
The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Parking Brake Strut (Part No.GMK4030519641)

Parking Brake Strut

from

$14.99
New Goodmark Park Brake Equalizer

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Wearever – Drum Brake Adjusting Screw Assembly with Tip (Part No.1531)

Drum Brake Adjusting Screw Assembly with Tip

from

$5.79
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured to restrain high tolerances with quality materials
  • Direct replacement for a proper fit
  • Helps deliver a quieter, more efficient braking system
See More

Carquest Wearever – Drum Brake Adjusting Screw Assembly with Tip (Part No.1530)

Drum Brake Adjusting Screw Assembly with Tip

from

$8.29
Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured to restrain high tolerances with quality materials
  • Direct replacement for a proper fit
  • Helps deliver a quieter, more efficient braking system
See More

Carquest Wearever – Brake Master Cylinder MCA21000: New, With Reservoir (Part No.MCA21000)

Brake Master Cylinder MCA21000: New, With Reservoir

from

$75.99
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.007 mm
  • Main cylinder hole of measured by the 0.003 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-49212)

Remanufactured Brake Master Cylinder

from

$31.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-49204)

Remanufactured Brake Master Cylinder

from

$49.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore (Part No.MCA40000)

New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore

from

$68.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:
  • Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
  • Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
  • 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
  • Strict specifications – made to meet rigorous SAE International standards
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-32000)

Remanufactured Brake Master Cylinder

from

$49.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

1965 Pontiac Safari Brake Parts

You count on your 1965 Pontiac Safari to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 23 Brake Parts ranging in price from $1.99 to $83.99, you’re sure to find everything you need for your 1965 Pontiac Safari.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 8 different brands like Carquest, Cardone, and Dorman. 1965 Pontiac Safari Brake Parts start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 128 extensive product reviews on 1965 Pontiac Safari Brake Parts. Some of the top-rated Brake Parts products we carry are New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore with 5.0 stars and Brake Hold-Down Spring with 5.0 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1965 Pontiac Safari below to get started!

Top-Rated Brake Parts Brands For Your 1965 Pontiac Safari

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Pontiac Safari running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Dorman, and even more.

Popular Dorman – Pik-a-Nut Brake Parts

You’ll find popular Dorman – Pik-a-Nut brand products across Brake Kits. All are waiting to get your 1965 Pontiac Safari back on the road. Some of the top-rated Dorman – Pik-a-Nut products in these categories are:

Top-Rated Carquest Wearever Brake Parts


If Carquest Wearever are what you’re looking for, our inventory holds plenty. We stock Carquest Wearever brand Brake Parts for your 1965 Pontiac Safari, and some of our most reviewed Carquest Wearever parts include:
WHEEL CYLINDER
from $13.99
(29)
WHEEL CYLINDER
Brake Wheel Cylinders
Drum Brake Adjusting Screw Assembly with Tip
from $8.29
(5)
Drum Brake Adjusting Screw Assembly with Tip
Brake Adjusting Screw Assemblies
Brake Hold-Down Spring Cup
from $3.79
(5)
Brake Hold-Down Spring Cup
Hold Down Spring Top Cup

FAQs for 1965 Pontiac Safari Brake Parts

What are the most purchased Brake Parts for the 1965 Pontiac Safari?

Out of 23 Brake Parts for the 1965 Pontiac Safari, the most popular in our inventory are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders
Door Jamb Switch
from $11.05
(1)
Door Jamb Switch
Parking Brake Switches
Drum Brake Adjusting Screw Assembly with Tip
from $5.79
(4)
Drum Brake Adjusting Screw Assembly with Tip
Brake Adjusting Screw Assemblies

What are the top-rated 1965 Pontiac Safari Brake Parts?

Top-rated Brake Parts for your 1965 Pontiac Safari based on customer reviews/ratings are:
New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore
from $68.99
(1)
New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore
“Was here quickly and was an exact match. Very pleased.”
Brake Hold-Down Spring
from $5.99
(1)
Brake Hold-Down Spring
“Bought brake hardware kit online, shorted two hold down springs in package. Advance Auto had replacement springs in stock, baled me out of a rough sit”
Wheel Cylinder Kit
from $5.99
(1)
Wheel Cylinder Kit
“So far so good. Hasn’t leaked a drop since the rebuild.”