1965 Pontiac Catalina Brake Parts

Below you will find various in-demand Pontiac Brake Parts, components and accessories for your 1965 Catalina. Advance Auto Parts has popular Catalina parts like Brake Hoses, Brake Pads and Shoes, Wheel Cylinders and more. You’ll also find aftermarket and OEM Brake Parts for other Catalina model years including 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981 and more. Select a category of 1965 Pontiac Catalina Brake Parts below and start saving instantly.

Popular 1965 Pontiac Catalina Brake Parts Categories

Front Brake Pads and Shoes

Brake Wheel Cylinders

Power Brake Boosters

Brake Master Cylinders

Brake Hoses

Hold Down Spring Top Cup

Spindle Lock Nut Kits

Parking Brake Struts

Brake Adjusting Screw Assemblies

Brake Wheel Cylinder Kits

Brake Hold Down Springs

Parking Brake Switches

Brake Pin Or Anchors

Essential Brake Parts for 1965 Pontiac Catalinas

from

$44.99

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$15.99

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$14.99

New Goodmark Park Brake Equalizer

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$106.99

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$106.99

100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
Exclusive rust-prohibitive finishing process extends unit life.
Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
All units are 100% tested to ensure reliable performance.
Guaranteed fit and function.

from

$11.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance.
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$6.99

Our Spindle Lock Nut Kit includes the nut, washer, and retainer. Each component is manufactured for high corrosion resistance and a long service life.

Product Features:

Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles.
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.29

Our Spindle Lock Nut Kit includes the nut, washer, and retainer. Each component is manufactured for high corrosion resistance and a long service life.

Product Features:

Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles.
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.79

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:

This part matches Original Equipment (OE) quality specifications
Fast and efficient replacement
Eliminates heat and corrosion deterioration

from

$5.79

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:

This part matches Original Equipment (OE) quality specifications
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured to restrain high tolerances with quality materials
Direct replacement for a proper fit
Helps deliver a quieter, more efficient braking system

from

$8.29

This part matches Original Equipment (OE) quality specifications
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured to restrain high tolerances with quality materials
Direct replacement for a proper fit
Helps deliver a quieter, more efficient braking system

from

$25.99

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$25.99

Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
Tensile minimum load holds up to 1800 N
All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
Brand may vary by location

from

$6.49

The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.29

Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.49

Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.99

Our Brake Spring Hold Down Pin is constructed from high-quality materials for a prolonged service life. Replacement restores the brake system to proper operation, helping to ensure road safety.

Product Features:

Corrosion-resistant for long-lasting durability against harsh road and weather conditions
Heat-resistant to withstand high temperatures generated by the brake system
Direct replacement for a proper fit
Manufactured to strict engineering quality standards

from

$1.99

Corrosion-resistant for long-lasting durability against harsh road and weather conditions
Heat-resistant to withstand high temperatures generated by the brake system
Direct replacement for a proper fit
Manufactured to strict engineering quality standards

from

$5.99

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:

This part matches Original Equipment (OE) quality specifications
Manufactured with quality materials to suppress high stress levels
Maintains safe movement and effective stopping performance
Restores brakes to like-new performance

from

$5.99

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down springs are designed to secure the brake shoes to the backing plate while allowing proper brake shoe movement.

Product Features:

This part matches Original Equipment (OE) quality specifications
Manufactured with quality materials to suppress high stress levels
Maintains safe movement and effective stopping performance

from

$41.99

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$30.99

Wearever Brake Shoes come bonded or riveted based on OE design.
Wearever Brake Shoes are coated to prevent rust.
Wearever Brake Shoes are 100% New not remanufactured.
Brand may vary by location

from

$75.74

Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:

OE-Equivalent and Direct Fit application.
OE style rubber-core shims
Advanced, platform-specific Semi Metallic formulation
Dedicated engineers source and rigorously test all friction materials and formulations
Manufactured under the same exacting quality standards as OE components and system
Powder-coated backing plate
Rigorous physical and dynamometer testing
Synthetic lubricant in box
Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
Provides maximum stability resulting in quieter shim performance over the life of the pad

from

$35.99

Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price

Product Features:

Dependable stopping power
Single layer shim for quiet braking
OE-designed slots and chamfers to reduce noise and vibration

from

$57.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All aluminum castings are “”hard anodized””
All iron castings are coated to prevent rust
Manufacturers all major components in house.
Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
All machining done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
Assembly is done in clean room insuring no contamination is introduced into final assembly.
All assemblies are dated coded for 100% accurate trace-ability.
Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance

from

$75.99

Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:

All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
Key components like spring are from high and stable quality suppliers.
Products are machined by CNC machines with strictly quality control.
Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
Direct replacement for a proper fit
Manufactured to strict engineering quality standards, meets S.A.E. specifications
Each product is 100% tested on production lines and sampling tested prior to shipment
Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.007 mm
Main cylinder hole of measured by the 0.003 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

from

$48.49

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

from

$47.99

Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
Plastic reservoirs are vacuum-tested to ensure they are leak free.

Upgrade your 1965 Pontiac Catalina with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1965 Pontiac Catalina, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Brake Parts are key to keeping your Catalina functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Brake Parts for the 1965 Pontiac Catalina, designed to meet your needs without breaking the bank. From Brake Hose replacements to Brake Pads and Shoes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1965 Pontiac Catalina at great prices. Our Brake Parts inventory for this model ranges from just $1.99 to $83.99, with an average price of $22.74. Our 19 Brake Parts in stock come from 5 trusted brands, so you’re sure to find the right part for your 1965 Pontiac Catalina without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Pontiac Catalina, we stock popular OEM and aftermarket Brake Parts from top names like Carquest Dorman, and more. Carquest Brake Parts start at just $3.79 and boast an impressive 4 stars average rating from customers. With 1,650 customer reviews and counting, our 1965 Pontiac Catalina Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1965 Pontiac Catalina is always ready to roll. We’re committed to providing you with everything you need to keep your Catalina in top shape, all in one place. Start shopping confidently below for your 1965 Pontiac Catalina!

Best-Selling Brake Hoses for 1965 Pontiac Catalinas

Enhance the driving experience in your Pontiac with 1 quality Brake Hose components, starting at $35.99.

show more show less

from

$35.99

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
Quality assured – materials tested to exacting government-regulated safety and durability standards
Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings

Top Picks for 1965 Pontiac Catalina Wheel Cylinders

Upgrade Pontiac Catalinas with top-quality Wheel Cylinders parts, including 4 OEM and aftermarket selections for your 1965 model.

show more show less

from

$14.99

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

Wheel cylinders match what was originally installed on the vehicle.
Each cylinder matches OE for form, fit and function and material
Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
All bleeder screws are coated providing extra protection
Rubber components are manufactured in house using the latest formula EPDM material.
Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All casting machining is done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

from

$5.99

Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$52.99

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

from

$52.99

Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

In-Demand Brake Lines and Fittings for 1965 Pontiac Catalinas

Select from 2 premium Brake Lines and Fittings parts for your 1965 Pontiac Catalina, with prices ranging from $5.79 to $8.29.

show more show less

from

$5.79

This part matches Original Equipment (OE) quality specifications
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured to restrain high tolerances with quality materials
Direct replacement for a proper fit
Helps deliver a quieter, more efficient braking system

from

$8.29

This part matches Original Equipment (OE) quality specifications
Corrosion resistant coating for long-lasting durability against harsh roads
Manufactured to restrain high tolerances with quality materials
Direct replacement for a proper fit
Helps deliver a quieter, more efficient braking system

Most Sold 1965 Pontiac Catalina Brake Kits

Explore our best-selling Pontiac parts for the 1965 Catalina among 3 OEM and aftermarket options starting from $5.49.

show more show less

from

$5.49

This spindle lock nut kit includes a new spindle nut and the necessary hardware designed to match the factory equipment.

Product Features:

Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

Our Spindle Lock Nut Kit includes the nut, washer, and retainer. Each component is manufactured for high corrosion resistance and a long service life.

Product Features:

Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles.
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.29

Our Spindle Lock Nut Kit includes the nut, washer, and retainer. Each component is manufactured for high corrosion resistance and a long service life.

Product Features:

Direct replacement – this spindle lock nut kit includes a nut and related, necessary hardware for servicing specific vehicles.
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to wear
Durable construction – kit components are manufactured to precise specifications to ensure proper fit and reliable service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top-Rated Brake Parts Brands For Your 1965 Pontiac Catalina

Shop for the best-rated brands offering Brake Parts and other products for your 1965 Pontiac Catalinas. Below you’ll find some of our best rated Brake Parts from Carquest and Dorman, and more. Brake Parts from these brands that fit a 1965 Catalina start at just $3.79 and are rated as high as 4 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest 1965 Pontiac Catalina Brake Parts

When it comes to maintaining or upgrading your 1965 Pontiac Catalina, using quality Brake Parts is essential to ensure durability and a perfect fit. Carquest ticks all of those boxes. We offer a wide selection of Carquest Brake Parts, specifically designed for the 1965 Pontiac Catalina. With over 13 Carquest brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.79, with an average price of just $23.49. Plus, with over 47 customer reviews and an average rating of 4 stars, you can trust that our Carquest Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$35.99

This product is not rated

Brake Hydraulic Hose

“”

from
$52.99

This product is not rated

WHEEL CYLINDER

“”

from
$52.99

This product is not rated

WHEEL CYLINDER

“”

Popular Dorman 1965 Pontiac Catalina Brake Parts

Dorman auto parts is one of the highest quality Brake Part brands in the market. Any 1965 Pontiac Catalina owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1965 Catalina, Advance Auto Parts carries a full inventory of 3 Dorman Brake Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Dorman Brake Parts range from $5.49 to $13.29, plus, with more than 8 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

from
$13.29

This product is not rated

Spindle Nut Kit

“”

from
$5.49

(7)

Spindle Nut Kit, 3/4-20 Contents: Nut, Washer And Cotter Pin

“Stock replacememt”

from
$6.99

(1)

Spindle Nut Kit

“Don’t use your old rusted one. At this cheap price get new. Worked great”

FAQs for 1965 Pontiac Catalina Brake Parts

Which Brake Parts are best-sellers for 1965 Pontiac Catalinas?

Out of 19 Brake Parts that fit 1965 Pontiac Catalinas, the following parts are the top sellers:

Door Jamb Switch (5970458) – $11.05
Drum Brake Adjusting Screw Assembly with Tip (5313139) – $5.79
New Brake Master Cylinder: With Reservoir, Exact Fit, 1" Bore (10163668) – $68.99

What’s the price range for 1965 Pontiac Catalina Brake Parts?

Brake Part prices for the 1965 Pontiac Catalina start at $1.99 and go up to $83.99 for the most premium parts.

What’s the average price of a Brake Part for a 1965 Pontiac Catalina?

The average price for Brake Parts for the 1965 Pontiac Catalina is $22.74. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Pontiac Catalina model years?

Yes, we currently carry Brake Parts for 31 model years of Pontiac Catalinas between 1950 and 1981. Brake Parts are bought most frequently for the following model years: 1981, 1980, 1979, 1978, 1977, 1976, 1975, 1974, and 1973.

What are the cheapest Brake Parts for my 1965 Pontiac Catalina?

The cheapest 1965 Pontiac Catalina Brake Parts we carry in stock are:

Brake Spring Hold Down Pin (11682866) – $1.99
Brake Hold-Down Spring Cup (5310075) – $3.79
Spindle Nut Kit, 3/4-20 Contents: Nut, Washer And Cotter Pin (3493202) – $5.49
Drum Brake Adjusting Screw Assembly with Tip (5313139) – $5.79
Wheel Cylinder Kit (5360277) – $5.99

What are the top-rated Brake Parts that fit the 1965 Pontiac Catalina?

Out of 1,650 reviews by customers, our 1965 Pontiac Catalina Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1965 Pontiac Catalina and their top-rated products:

Wheel Cylinders
- WHEEL CYLINDER (5640202) – $14.99
- Wheel Cylinder Kit (5360277) – $5.99
Brake Sensors and Switches
- WHEEL CYLINDER (5640202) – $14.99
- Wheel Cylinder Kit (5360277) – $5.99
Brake Lines and Fittings
- WHEEL CYLINDER (5640202) – $14.99
- Wheel Cylinder Kit (5360277) – $5.99

What types of Brake Parts do you sell for my 1965 Pontiac Catalina?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1965 Pontiac Catalina:

Can I get help with 1965 Pontiac Catalina Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Brake Parts and more.

What is your return policy for Pontiac Catalina Brake Parts?

Advance Auto Parts keeps returns simple. For new Pontiac Catalina Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1965 Pontiac Catalina Brake Parts

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA32091)

Carquest Wearever – Drum Brake Wheel Cylinder (Part No.WCA51088)

KAI – Parking Brake Strut (Part No.GMK4030519641)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-91107)

Wearever – Vacuum Brake Booster: Without Master Cylinder (Part No.54-91002)

Carquest – Door Jamb Switch (Part No.S227)

Dorman – Help – Spindle Nut Kit (Part No.04993)

Dorman – Spindle Nut Kit (Part No.05193)

Carquest Wearever – Brake Hold-Down Spring Cup (Part No.1133-2)

Carquest Wearever – Drum Brake Adjusting Screw Assembly with Tip (Part No.1531)

Carquest Wearever – Drum Brake Adjusting Screw Assembly with Tip (Part No.1530)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA86576)

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA97664)

Carquest Wearever – Drum Brake Wheel Cylinder Repair Kit (Part No.WCKA13620)

Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA11303)

Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA35629)

Dorman – First Stop – Brake Spring Hold Down Pin (Part No.HW1107)

Dorman – First Stop – Brake Spring Hold Down Pin (Part No.HW1109)

Carquest Wearever – Brake Spring Hold-Down Pin (Part No.1109-2)

Carquest Wearever – Brake Hold-Down Spring (Part No.1150-2)

Carquest Wearever – Brake Shoes (Part No.S197)

Carquest Wearever – Brake Shoes (Part No.S264)

Bosch – QuietCast Premium Brake Pads w/ Shims (Part No.N1010441183BOS)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.MKD52)

Carquest Wearever – New Brake Master Cylinder (Part No.MCA104456)

Carquest Wearever – Brake Master Cylinder MCA21000: New, With Reservoir (Part No.MCA21000)

Wearever – Remanufactured Brake Master Cylinder (Part No.10-1521)

Wearever – Remanufactured Brake Master Cylinder (Part No.10-1870)

Carquest Wearever – Brake Hydraulic Hose (Part No.BHA36527)

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD3)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA51081)

Carquest Wearever – Wheel Cylinder Kit (Part No.WCKA46348)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37046)

Carquest Wearever – WHEEL CYLINDER (Part No.WCA37047)

Carquest Wearever – Drum Brake Adjusting Screw Assembly with Tip (Part No.1531)

Carquest Wearever – Drum Brake Adjusting Screw Assembly with Tip (Part No.1530)

Dorman – Pik-a-Nut – Spindle Nut Kit, 3/4-20 Contents: Nut, Washer And Cotter Pin (Part No.304993.1)

Dorman – Help – Spindle Nut Kit (Part No.04993)

Dorman – Spindle Nut Kit (Part No.05193)