1965 Pontiac Bonneville Drivetrains

Below you will find various in-demand Pontiac Drivetrains, components and accessories for your 1965 Bonneville. Advance Auto Parts has popular Bonneville parts like Differentials, Spindles, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other Bonneville model years including 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and more. Select a category of 1965 Pontiac Bonneville Drivetrains below and start saving instantly.

Popular 1965 Pontiac Bonneville Drivetrains Categories

Differential Oil

U-Joints

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

U-Joint Strap Kits

Differential Bearings

Differential Axle Shafts

Bearing Pullers

Drive Shaft Bearings

Axle Shaft Seals

Differential Pinion Pilot Bearings

Transfer Case Output Shaft Seals

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Axle Flange Gaskets

Differential Ring and Pinions

Differential End Yokes

Spindle Lock Nuts

Differential Carrier Bearings

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Spindle Lock Nut Thrust Washers

Input Shaft Seals

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Mounting Adapter Seals

Differential Lock Washers

Mounting Adapter Bearing

Essential Drivetrains for 1965 Pontiac Bonnevilles

from

$57.99

Product Features:

Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear

from

$5.19

SHAFT SEAL

from

$153.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits 8.2″ Buick, Oldsmobile and Pontiac
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$156.99

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$59.99

Product Features:

Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
Interlocking design makes installation much easier

from

$11.49

This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles.
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$10.49

Our Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$282.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits 8.2″ Buick, Oldsmobile and Pontiac
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$65.99

Product Features:

MINI INSTALL KIT GM 8.5 REAR

from

$2.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$24.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$18.99

CONE

from

$5.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$119.99

HM89249 set-up bearing (one bearing). No return.

Product Features:

Set up bearing
Fits HM89249 pinion bearing
Easily slips on and off pinion journal to allow for pinion depth adjustment

from

$279.99

Yukon positraction internals for 7.5″ and 7.625″ GM with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects. This kit fits Yukon Dura Grip & Eaton positraction cases. It is not compatible with any other positractions.

Product Features:

Spider gear kit
Fits GM gm 7.5″ and 7.625″ with 28 spline Dura Grip positraction
Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$1.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$37.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$389.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This gear set does not have an ABS provision on the pinion.

Product Features:

Fits GM 8.5″ and 8.6″
8.50″ ring gear diameter
30 spline pinion
10 ring gear bolts
4.56 ratio

from

$544.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$3.49

This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

7.2″ GM 7.5″ GM & 8.2″ GM pinion seal.Yukon Mighty seal.

Product Features:

Pinion seal
Fits GM 7.2″ IFS, 1999 and down GM 7.5″ and 7.625″ and GM 8.2″
2.660″ O.D.

from

$6.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$15.99

DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging to provide higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting allows for easy maintenance and the flexible use of the entire assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals are applied to optimize grease retention and reduce contamination

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$9.99

Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:

Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
7/8″ x 14 thread
1 1/4″ socket

from

$4.99

3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:

Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac

from

$281.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

Upgrade your 1965 Pontiac Bonneville with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1965 Pontiac Bonneville, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Drivetrains are key to keeping your Bonneville functioning at its best. At Advance Auto Parts, we offer a wide selection of 122 Drivetrains for the 1965 Pontiac Bonneville, designed to meet your needs without breaking the bank. From Differential replacements to Spindles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1965 Pontiac Bonneville at great prices. Our Drivetrains inventory for this model ranges from just $2.49 to $1,566.99, with an average price of $190.63. Our 122 Drivetrains in stock come from 15 trusted brands, so you’re sure to find the right part for your 1965 Pontiac Bonneville without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Pontiac Bonneville, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Moog, Driveworks, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 5 stars average rating from customers. Moog and Driveworks also bring quality to the table, with Drivetrains available starting at $6.29, and at an average 4 stars rating. With 7,464 customer reviews and counting, our 1965 Pontiac Bonneville Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1965 Pontiac Bonneville is always ready to roll. We’re committed to providing you with everything you need to keep your Bonneville in top shape, all in one place. Start shopping confidently below for your 1965 Pontiac Bonneville!

Best-Selling Differentials for 1965 Pontiac Bonnevilles

Enhance the driving experience in your Pontiac with 94 quality Differential components, starting at $3.99.

show more show less

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$35.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$13.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.49

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$6.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$23.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$8.49

High-quality Differential Carrier Shim Kit

Product Features:

CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON

from

$8.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$16.99

Product Features:

Brand may vary by location

from

$3.99

from

$5.49

Product Features:

CRUSH SLEEVE 12 BLT CAR

from

$9.99

Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:

Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
7/8″ x 14 thread
1 1/4″ socket

from

$12.99

Product Features:

KIT SHIM

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$5.99

Crush sleeve for GM 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.2″ & 8.2″ Buick/Olds/Pontiac. .625″ long.

Product Features:

Crush sleeve for GM 7.5″, 7.625″, 7.6″ IFS, 8.2″ and 8.2″ Buick, Oldsmobile and Pontiac
0.625″ tall

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$21.99

Product Features:

Pinion depth shims for GM 7.5″, 7.625″, 7.6 IFS, 7.6 IRS, 7.75″, 8.2″, 1955-1964 passenger car and 12 bolt car and truck

from

$248.99

Product Features:

GM 12BL 8.875 R/P 3.42 MGP

from

$109.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
Includes carrier bearings and races and “super” carrier shim kit

from

$38.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$39.99

8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:

Pinion depth shim kit for Toyota 7.5″, 8″ and V6

from

$441.99

The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.Powertrax® = Extreme Traction Systems!

from

$322.99

Product Features:

BOP R/P 8.2″ 10BLT 4.11

from

$234.99

Yukon 1541H alloy rear axle for GM 8.2″ with length of 29-7/8″ and 28 splines axle shaft for use with Buick, Oldsmobile, and Pontiac. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. long splines can be chopped off.

Product Features:

Fits 8.2″ Buick, Oldsmobile and Pontiac
28 spline
29 7/8″ long

from

$156.99

from

$105.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

MSTR BRG KT – 12 BOLT CAR

from

$74.99

Product Features:

Fits 8.2″ Buick, Oldsmobile and Pontiac
Chrome

from

$57.99

8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:

Pinion Redi-sleeve
Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac

from

$59.99

Product Features:

Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
Interlocking design makes installation much easier

from

$39.49

RngPnnInstlKt

from

$37.99

The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

Product Features:

Forged From Premium Grade 8740 Chrome Moly Steel
Heat Treated
Nominally Rated At 200,000 Psi Tensile Strength
Specially Hardened, Precision Ground Washers
3/8″-24 RH Thread Size
0.8″ Underhead Length
200,000 PSI

from

$94.49

BRG & SEAL KIT-10 BOLT “P” AXLE

from

$1566.99

21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:

Bearing race driver set
21 pieces
All steel construction

from

$929.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This case is drilled for 3/8″ bolts. Some factory gears use 7/16″ bolts. If your factory gear uses 7/16″ bolts you will need to drill out the ring gear bolt holes.

Product Features:

Fits GM 8.2″ in Buick, Oldsmobile and Pontiac
3.31 ratio and up only
4-spring, clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$601.99

Yukon spider gear set for GM 8.2″ Buick, Olds, Pontiac Dura Grip posi, 28 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.

Product Features:

Spider gear kit
Fits 8.2″ Buick, Oldsmobile and Pontiac with Dura Grip positraction
Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$566.99

RngPnn

from

$558.99

RngPnn

from

$551.99

from

$544.99

from

$544.99

from

$538.99

RngPnn

from

$513.99

RngPnn

from

$513.99

RngPnn

from

$513.99

RngPnn

Top Picks for 1965 Pontiac Bonneville Universal Joints

Upgrade Pontiac Bonnevilles with top-quality Universal Joints parts, including 10 OEM and aftermarket selections for your 1965 model.

show more show less

from

$2.59

Universal Joint Strap Kit

from

$26.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging to provide higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting allows for easy maintenance and the flexible use of the entire assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals are applied to optimize grease retention and reduce contamination

from

$32.99

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$50.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$8.99

Universal Joint

from

$34.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$32.49

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$4.59

Universal Joint

In-Demand Drive Shafts and Axles for 1965 Pontiac Bonnevilles

Select from 4 premium Drive Shafts and Axles parts for your 1965 Pontiac Bonneville, with prices ranging from $2.49 to $883.99.

show more show less

from

$49.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$42.99

Outer axle seal for set9, fits.490″ wide 8.2″ Buick, Oldsmobile, and Pontiac applications only.Yukon Mighty seal.

Product Features:

Outer axle seal
Fits 8.2″ Buick, Oldsmobile and Pontiac
0.490″ wide

from

$2.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Most Sold 1965 Pontiac Bonneville Transfer Cases

Explore our best-selling Pontiac parts for the 1965 Bonneville among 10 OEM and aftermarket options starting from $6.79.

show more show less

from

$15.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$10.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$9.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$12.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$14.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$6.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$24.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$11.29

CUP

from

$9.59

SHAFT SEAL

Top-Rated Drivetrains Brands For Your 1965 Pontiac Bonneville

Shop for the best-rated brands offering Drivetrains and other products for your 1965 Pontiac Bonnevilles. Below you’ll find some of our best rated Drivetrains from Valvoline, Moog, and Driveworks, and more. Drivetrains from these brands that fit a 1965 Bonneville start at just $6.29 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 1965 Pontiac Bonneville Drivetrains

When it comes to maintaining or upgrading your 1965 Pontiac Bonneville, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1965 Pontiac Bonneville. With over 2 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $25.24. Plus, with over 19 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

“Equivalent to oem”

from
$14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”

Popular Moog 1965 Pontiac Bonneville Drivetrains

Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1965 Pontiac Bonneville owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1965 Bonneville, Advance Auto Parts carries a full inventory of 3 Moog Drivetrains. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Moog Drivetrains range from $26.99 to $34.99, plus, with more than 159 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from
$26.99

(89)

Greaseable Premium Universal Joint

“Great moog u joints”

from
$32.99

(22)

Non-Greaseable Super Strength Universal Joint

“Moog products are always great quality. Perfect fit”

from
$34.99

(48)

Greaseable Super Strength Universal Joint

“Great Product!”

FAQs for 1965 Pontiac Bonneville Drivetrains

Which Drivetrains are best-sellers for 1965 Pontiac Bonnevilles?

Out of 122 Drivetrains that fit 1965 Pontiac Bonnevilles, the following parts are the top sellers:

Universal Joint (10265505) – $15.99
3 Qt – 80W90 Conventional Gear Oil With Posi Additive (11645418) – $57.99
Multi Purpose Seal (3271668) – $7.99

What’s the price range for 1965 Pontiac Bonneville Drivetrains?

Drivetrain prices for the 1965 Pontiac Bonneville start at $2.49 and go up to $1,566.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1965 Pontiac Bonneville?

The average price for Drivetrains for the 1965 Pontiac Bonneville is $190.63. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Pontiac Bonneville model years?

Yes, we currently carry Drivetrains for 48 model years of Pontiac Bonnevilles between 1957 and 2005. Drivetrains are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, and 1997.

What are the cheapest Drivetrains for my 1965 Pontiac Bonneville?

The cheapest 1965 Pontiac Bonneville Drivetrains we carry in stock are:

Drive Axle Shaft Flange Gasket (20680380) – $2.49
Universal Joint (18270063) – $2.59
Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (22148864) – $3.49
Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (22972449) – $3.79
Spindle Nut 3/4 In.-20 Hex 1-1/16 In. (Sold by each) (22149138) – $3.79

What are the top-rated Drivetrains that fit the 1965 Pontiac Bonneville?

Out of 7,464 reviews by customers, our 1965 Pontiac Bonneville Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1965 Pontiac Bonneville and their top-rated products:

Differentials
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Differential Pinion Shim Kit (20520100) – $7.49
Universal Joints
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
- DEX/MERC Automatic Transmission Fluid, 1 Gallon (8150022) – $35.99
- Differential Pinion Shim Kit (20520100) – $7.49

What types of Drivetrains do you sell for my 1965 Pontiac Bonneville?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 1965 Pontiac Bonneville:

Can I get help with 1965 Pontiac Bonneville Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Drivetrains and more.

What is your return policy for Pontiac Bonneville Drivetrains?

Advance Auto Parts keeps returns simple. For new Pontiac Bonneville Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1965 Pontiac Bonneville Drivetrains

Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)

FAG US – SHAFT SEAL (Part No.SS2569)

Yukon Gear – Minor Install Kit For GM 8.2" Differential For Buick, Oldsmobile, Pontiac (Part No.12054)

Motive Gear – Differential Super Bearing Kit – Timken (Part No.R12CRSKT)

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Dorman – Help – U-Joint Repair Kit (Part No.81001)

Dorman – Spindle Nut M27-2.0 (Part No.05107)

Yukon Gear – Pinion Install Kit For GM 8.2" Differential For Buick, Pontiac, And Oldsmobile (Part No.13068)

Motive Gear – Differential Gear Install Kit (Part No.GM8.5IK)

Felpro – Drive Axle Shaft Flange Gasket (Part No.13831)

National – Shaft Repair Sleeve (Part No.99125)

FAG US – CONE (Part No.KM86649)

Pro-King – Differential Pinion Shim Kit (Part No.742G202)

Yukon Gear – Set Up Bearing (Part No.56043)

Yukon Gear – Positraction Internals For 7.5" And 7.625" GM With 28 Spline Axles (Part No.16117)

Pro-King – Axle Seal (Part No.721A074)

National – Shaft Repair Sleeve (Part No.99199)

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 8.5" & 8.6" In A 4.56 Ratio (Part No.24161)

Powertrax – No-Slip Traction System (Part No.9207822805)

Felpro – Differential Cover Gasket (Part No.RDS 55029)

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-005)

Yukon Gear – 7.2" GM 7.5" GM & 8.2" GM Pinion Seal (Part No.30192)

Driveworks – Oil Seal Kit (Part No.S-5200)

Driveworks – Universal Joint (Part No.DW-534G)

Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

Yukon Gear – Pinion Nut (Part No.33152)

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

Dorman – Rear Axle Shaft, Left or Right (Part No.630-142)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

National – Multi Purpose Seal (Part No.8460N)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Driveworks – Oil Seal (Part No.S-8460N)

Felpro – Differential Cover Gasket (Part No.RDS 55029)

National – Bearings (Part No.M802048)

Motive Gear – Differential Carrier Shim Kit (Part No.1101)

Motive Gear – Pinion Nut (Part No.1260823)

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Motive Gear – Pinion Seal (Part No.8610)

Motive Gear – Differential Crush Sleeve (Part No.3954480)

Yukon Gear – Pinion Nut (Part No.33152)

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Yukon Gear – Crush Sleeve (Part No.33110)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Yukon Gear – Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck (Part No.55008)

Motive Gear – Performance Differential Ring and Pinion (Part No.G888342)

Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

National – Shaft Repair Sleeve (Part No.99170)

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Powertrax – Lock Right Locker (Part No.1940-LR)

Motive Gear – Performance Differential Ring and Pinion (Part No.BP882411)

Yukon Gear – 1541H Alloy Rear Axle For GM 8.2" (Part No.21289)

Motive Gear – Differential Super Bearing Kit – Timken (Part No.R12CRSKT)

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R12CRMK)

Yukon Gear – Chrome Cover For 8.2" Buick, Oldsmobile, And Pontiac GM (Part No.32015)

Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Richmond Gear – RngPnnInstlKt (Part No.83-1019-B)

ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)

Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.5PR)

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Yukon Gear – Duragrip Posi For 8.2" Buicks, Olds & Pontiac With 28 Spline Axles (Part No.26024)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Spider Gear Set For GM 8.2" Buick, Olds, Pontiac Dura Grip Posi, 28 Spline (Part No.16144)

Richmond Gear – RngPnn (Part No.79-0074-1)

Richmond Gear – RngPnn (Part No.79-0099-1)

Powertrax – No-Slip Traction System (Part No.9207883005)

Powertrax – No-Slip Traction System (Part No.9207822801)

Powertrax – No-Slip Traction System (Part No.9207822805)

Richmond Gear – RngPnn (Part No.79-0031-1)

Richmond Gear – RngPnn (Part No.79-0072-1)

Richmond Gear – RngPnn (Part No.79-0027-1)

Richmond Gear – RngPnn (Part No.79-0029-1)

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-005.1)

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-005)

Dorman – Spindle Nut 3/4 In.-20 Hex 1-1/16 In. (Sold by each) (Part No.615-065)