1965 Oldsmobile Cutlass Body Parts

Essential 1965 Oldsmobile Cutlass Body Parts

KAI – Door Hinge Bolt (Part No.GMK403040264S)

Door Hinge Bolt

from

$71.99
New Goodmark 24 Piece Door Hinge Bolt Set

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Deck Lid Seal (Part No.GMK403570378)

Deck Lid Seal

from

$84.99
New Goodmark Trunk Weatherstrip

Product Features:
  • Made Of Rubber
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

AmeriSeal – Flexible Window Glass Run Channel 96" Length (Part No.10871)

Flexible Window Glass Run Channel 96" Length

from

$18.99
Ameriseal’s 96″ Flexible Window Glass Run Channel For Application- 1960-1967 GM Mid Size Car is an anti-rattle channel made of high-grade rubber. With a sturdy and durable build, you can be sure to have it in a good condition even in the long run. It is designed to be easily installed by anybody by simply replacing any worn-out and old window glass run channel.

Product Features:
  • Flexible model
  • Flocked lining system
  • All-Rubber body
See More

KAI – Hood Hinge (Part No.GMK401021063R)

Hood Hinge

from

$67.99
New Goodmark Passenger Side Hood Hinge Assembly

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Window Channel (Part No.VR 2009)

Window Channel

from

$50.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vertical Glass Run Channel. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber flocked to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Handle Set (Part No.GMK403144066S)

Door Handle Set

from

$64.99
New Goodmark Driver And Passenger Side Front Outer Door Handle Kit, Includes Handles, Gaskets, Pushbuttons And Hardware

Product Features:
  • Includes Handles Gaskets Pushbuttons And Hardware
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Seal (Part No.LM 16-S)

Door Seal

from

$271.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Front Molded Door Seals. For 4-door sedan and wagon. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)

Fuel Door Rubber Stop

from

$8.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Window Crank Handle (Part No.GMK403042165)

Window Crank Handle

from

$15.99
New Goodmark Window Crank Handle With Chrome Knob

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Window Seal (Part No.ALP 5500)

Door Window Seal

from

$75.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Seal for Convertibles. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Stop (Part No.GMK403240368S)

Door Stop

from

$15.99
New Goodmark 4 Piece Rubber Door Bumper Kit

Product Features:
  • Made Of Rubber
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Lock Kit (Part No.DLC1167)

Door Lock Kit

from

$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Deck Lid Latch (Part No.GMK404270559)

Deck Lid Latch

from

$34.99
New Goodmark Trunk Latch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Convertible Top Seal (Part No.RR 1611)

Convertible Top Seal

from

$356.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Molded Roof Rail Seals, for Convertibles. 5-Piece set includes all right and left side top rail seals and windshield top header seal (HD 728).

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Vent Glass Seal (Part No.WR 2012)

Vent Glass Seal

from

$190.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vent Window Seals. Fits 4-door sedan. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Dorman – Help – Door Lock Rod Clips (Part No.75455)

Door Lock Rod Clips

from

$7.99
This door lock rod clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door lock rod clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

KAI – Floor Reinforcement (Part No.GMK4030517642)

Floor Reinforcement

from

$129.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Window Seal (Part No.ALP 5000-A)

Door Window Seal

from

$55.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Door Lock Pillar Seal for 4-Door Hardtops. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Floor Pan Toe Board (Part No.GMK403237068R)

Floor Pan Toe Board

from

$119.99
New Goodmark Floor Pan T Board, Passenger Side, 30 X 16, With Floor To Firewall Extension, Includes Part Of Transmission Hump

Product Features:
  • Passenger Side 30 X 16 With Floor To Firewall Extension Includes Part Of Transmission Hump
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Trunk Floor (Part No.GMK403272568U)

Trunk Floor

from

$169.99
New Goodmark 1 Piece Trunk Floor, 47 Inches Wide X 34 Inches Long

Product Features:
  • 47 Inches Wide X 34 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Bumper (Part No.SM 66)

Bumper

from

$15.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rocker Arm Cover. Neoprene plug. Fits 1 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Floor Pan (Part No.GMK403250068L)

Floor Pan

from

$394.99
New Goodmark Cab Floor, Driver Side, Full Length, 30 Inch X 62 Inch, EDP-Coated

Product Features:
  • Driver Side Full Length 30 Inch X 62 Inch EDP-Coated
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Deck Lid Stop Buffer (Part No.SB 34)

Deck Lid Stop Buffer

from

$28.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Fits lower corner on deck lid. 15/16 In. O.D. 11/16 In. high. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Stop (Part No.HF 28)

Door Stop

from

$13.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door, Hood and Cowl Bumper. Made with steel core. Held by screw. 15/16 In. high. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Carquest Premium – Trunk Lock (Part No.TLC1052)

Trunk Lock

from

$13.49
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

KAI – Dash Panel Patch (Part No.GMK403052164)

Dash Panel Patch

from

$79.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield

Product Features:
  • 57 Inch X 2 Inch Between Dash And Windshield
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Pillar Post Seal (Part No.CZ 8104)

Door Pillar Post Seal

from

$73.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Finely crafted and detailed. All of Metro’s Door Lock Pillar Seals are the best available anywhere. They are the best, with molded-in steel cores and superbly detailed outer rubber. Windshield Pillar Post Seals for Convertibles. Sponge reproduction with a jet black, smooth skin. Each. piece is 23-3/16 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Quarter Glass Seal (Part No.VS 3-L)

Quarter Glass Seal

from

$50.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Roll-Up Window Seals, for 2-Door Hardtops and Convertibles. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

1965 Oldsmobile Cutlass Body Parts

You count on your 1965 Oldsmobile Cutlass to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Body Parts. With 46 Body Parts ranging in price from $4.49 to $356.99, you’re sure to find everything you need for your 1965 Oldsmobile Cutlass.

Brands matter. If you want to shop a specific Body Parts brand, we stock 6 different brands like LOCKSmart, ACDelco, and Metro Mould. 1965 Oldsmobile Cutlass Body Parts start as low as $4.49!

One of the best ways to find top quality OEM or aftermarket Body Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 16 extensive product reviews on 1965 Oldsmobile Cutlass Body Parts.

Did we mention you can order your Body Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Body Parts inventory for your 1965 Oldsmobile Cutlass below to get started!

Top-Rated Body Parts Brands For Your 1965 Oldsmobile Cutlass

Trusted Body Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Oldsmobile Cutlass running right for years to come. In our inventory you’ll find brands like LOCKSmart, ACDelco, Metro Mould, and even more.

Popular Locksmart Body Parts

You’ll find popular Locksmart brand products across Vehicle Doors. All are waiting to get your 1965 Oldsmobile Cutlass back on the road. Some of the top-rated Locksmart products in these categories are:
Door Lock Kit
from $24.29
(4)
Door Lock Kit
Door Lock Kits

FAQs for 1965 Oldsmobile Cutlass Body Parts

What are the most purchased Body Parts for the 1965 Oldsmobile Cutlass?

Out of 46 Body Parts for the 1965 Oldsmobile Cutlass, the most popular in our inventory are:
Trunk Lock with Key
from $13.99
This product is not rated
Trunk Lock with Key
Trunk Lock Cylinders
Door Lock Assembly
from $4.99
This product is not rated
Door Lock Assembly
Door Lock Clips
Window Crank Handle
from $15.99
This product is not rated
Window Crank Handle
Window Handles