1965 Mercedes-Benz 230SL Brake Parts

Essential Brake Parts for 1965 Mercedes-Benz 230SLs

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104011989ATE)

Original Brake Caliper, New - Friction Ready

from

$561.81
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE Premium One – Original Brake Caliper, Friction Ready (Part No.N1040939960ATE)

Original Brake Caliper, Friction Ready

from

$484.70
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

FTE – Brake Master Cylinder (Part No.N300028465FTE)

Brake Master Cylinder

from

$403.18
FTE Brake Master Cylinders are manufactured to OE Specifications using both aluminum and iron castings. FTE Brake Master Cylinders are ready to bench bleed and install right out of the box.

Product Features:
  • Meets the brake performance requirements of SAE J1153 and J1154
  • Matching Original Equipment Quality
  • Pressure tested to ensure safe and confident braking
  • Direct Replacement for Original Part
See More

Carquest Premium Gold – Brake Pads: Ceramic, Long Life and Quiet (Part No.GNAD31)

Brake Pads: Ceramic, Long Life and Quiet

from

$43.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Bosch – QuietCast Premium Brake Pads – w/ Hardware and Shims (Part No.N1010441059BOS)

QuietCast Premium Brake Pads - w/ Hardware and Shims

from

$72.78
Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • OE style rubber-core shims
  • Advanced, platform-specific Semi Metallic formulation
  • Dedicated engineers source and rigorously test all friction materials and formulations
  • Manufactured under the same exacting quality standards as OE components and system
  • Powder-coated backing plate
  • Rigorous physical and dynamometer testing
  • Synthetic lubricant in box
  • Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
  • At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
  • Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
  • Provides maximum stability resulting in quieter shim performance over the life of the pad
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD4)

Brake Pads: Reliable and Dependable Stopping

from

$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
See More

FTE – Wheel Cylinder (Part No.N20201097656FTE)

Wheel Cylinder

from

$112.52
FTE wheel cylinders are manufactured using lightweight aluminum or cast iron to match the original design. The EPDM rubber used in the FTE wheel cylinder is a long-life formulation, 100% compatible with all types of brake fluid.

Product Features:
  • Resistant to corrosion and to brake fluid
  • Provides a longer service life
  • Made with high quality EPDM rubber cups and boots for long lasting performance
  • Manufactured to OE Quality specifications
See More

Febi – Exhaust Nut (Part No.H100111133FEB)

Exhaust Nut

from

$2.02
Exhaust Nut

FAG – Brake Caliper Repair Kit (Part No.N105011801FAG)

Brake Caliper Repair Kit

from

$52.77
FAG Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100024943ZIC)

Coat-Z Brake Disc (Rotor)

from

$73.90
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Febi – Parking Brake Shoe Spring (Part No.N500272009FEB)

Parking Brake Shoe Spring

from

$1.60
Parking Brake Shoe Spring

ATE – Booster Check Valve (Part No.N4030459144ATE)

Booster Check Valve

from

$43.33
Booster Check Valve

Upgrade your 1965 Mercedes-Benz 230SL with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 1965 Mercedes-Benz 230SL, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Brake Parts are key to keeping your 230SL functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Brake Parts for the 1965 Mercedes-Benz 230SL, designed to meet your needs without breaking the bank. From Wheel Cylinder replacements to Brake Rotors and Drums upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 1965 Mercedes-Benz 230SL at great prices. Our Brake Parts inventory for this model ranges from just $1.60 to $561.81, with an average price of $155.63. Our 12 Brake Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1965 Mercedes-Benz 230SL without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Mercedes-Benz 230SL, we stock popular OEM and aftermarket Brake Parts from top names like ATE Carquest Premium, and more. ATE Brake Parts start at just $43.33 and boast an impressive 5 stars average rating from customers. With 21 customer reviews and counting, our 1965 Mercedes-Benz 230SL Brake Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1965 Mercedes-Benz 230SL is always ready to roll. We’re committed to providing you with everything you need to keep your 230SL in top shape, all in one place. Start shopping confidently below for your 1965 Mercedes-Benz 230SL!

Best-Selling Wheel Cylinders for 1965 Mercedes-Benz 230SLs

Enhance the driving experience in your Mercedes-Benz with 1 quality Wheel Cylinder components, starting at $112.52.

FTE – Wheel Cylinder (Part No.N20201097656FTE)

Wheel Cylinder

from

$112.52
FTE wheel cylinders are manufactured using lightweight aluminum or cast iron to match the original design. The EPDM rubber used in the FTE wheel cylinder is a long-life formulation, 100% compatible with all types of brake fluid.

Product Features:
  • Resistant to corrosion and to brake fluid
  • Provides a longer service life
  • Made with high quality EPDM rubber cups and boots for long lasting performance
  • Manufactured to OE Quality specifications
See More

Most Popular 1965 Mercedes-Benz 230SL Brake Rotors and Drums

Customize your Mercedes-Benz with 1 Brake Rotors and Drums products like Front Brake Rotors, all priced under $73.90.

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100024943ZIC)

Coat-Z Brake Disc (Rotor)

from

$73.90
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Top Picks for 1965 Mercedes-Benz 230SL Brake Pads and Shoes

Upgrade Mercedes-Benz 230SLs with top-quality Brake Pads and Shoes parts, including 3 OEM and aftermarket selections for your 1965 model.

Carquest Premium Gold – Brake Pads: Ceramic, Long Life and Quiet (Part No.GNAD31)

Brake Pads: Ceramic, Long Life and Quiet

from

$43.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Bosch – QuietCast Premium Brake Pads – w/ Hardware and Shims (Part No.N1010441059BOS)

QuietCast Premium Brake Pads - w/ Hardware and Shims

from

$72.78
Bosch QuietCast Premium raises aftermarket brake pad technology to a whole new level. Employing the industry’s best pre-attached, rubber core shims and Molded Shim Technology (on selected applications), QuietCast delivers the quiet operation you and your customers expect with the durability and long life that are the hallmarks of all Bosch products. Every Bosch QuietCast Disc Brake Pad is fitted with the industry’s best pre-attached rubber core shim. This shim style is the most predominant type used by OE manufacturers and is exclusively offered by Bosch for the independent aftermarket.

Product Features:
  • OE-Equivalent and Direct Fit application.
  • OE style rubber-core shims
  • Advanced, platform-specific Semi Metallic formulation
  • Dedicated engineers source and rigorously test all friction materials and formulations
  • Manufactured under the same exacting quality standards as OE components and system
  • Powder-coated backing plate
  • Rigorous physical and dynamometer testing
  • Synthetic lubricant in box
  • Pads individually wrapped Bosch Molded Shim Technology (MST)*** (On Select Applications)
  • At the time of pressing, heat, adhesive and pressure mold the multi-layer shim to the backing plate and friction material creating an integrally molded unit.
  • Shim stays attached throughout the life of the pad; won’t walk or slide on the backing plate
  • Provides maximum stability resulting in quieter shim performance over the life of the pad
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD4)

Brake Pads: Reliable and Dependable Stopping

from

$15.00
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
See More

In-Demand Brake Calipers for 1965 Mercedes-Benz 230SLs

Select from 2 premium Brake Calipers parts for your 1965 Mercedes-Benz 230SL, with prices ranging from $484.70 to $561.81.

ATE – Original Brake Caliper, New – Friction Ready (Part No.N104011989ATE)

Original Brake Caliper, New - Friction Ready

from

$561.81
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

ATE Premium One – Original Brake Caliper, Friction Ready (Part No.N1040939960ATE)

Original Brake Caliper, Friction Ready

from

$484.70
100% New Caliper – Manufacturer recommends replacing calipers in pairs. With innovative fixed and floating calipers in aluminum and nodular cast iron, ATE is Europe’s market leader. And there is a good reason for that: during development, ATE simulates operational stresses in terms of braking load, vibration, corrosion and wear in extensive series of trials. This means that every basic safety-relevant function is ensured, the sealing of the hydraulic system as much as the venting function of the piston (roll-back), the return (knock-back) function, or the function of the housing/pad guides. ATE original brake calipers are supplied ready-to-install: rear-axle calipers with handbrake are usually pre-filled and preset. This permits simple and correct bleeding in the vehicle.

Product Features:
  • OE quality direct fit application.
  • Friction Ready
  • Corrosion inhibiting protection
  • Ensures long life and maximum performance
  • Natural exterior finish
See More

Most Sold 1965 Mercedes-Benz 230SL Brake Kits

Explore our best-selling Mercedes-Benz parts for the 1965 230SL among 1 OEM and aftermarket options starting from $52.77.

FAG – Brake Caliper Repair Kit (Part No.N105011801FAG)

Brake Caliper Repair Kit

from

$52.77
FAG Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Top-Rated Brake Parts Brands For Your 1965 Mercedes-Benz 230SL

Shop for the best-rated brands offering Brake Parts and other products for your 1965 Mercedes-Benz 230SLs. Below you’ll find some of our best rated Brake Parts from ATE and Carquest Premium, and more. Brake Parts from these brands that fit a 1965 230SL start at just $43.33 and are rated as high as 5 stars. OEM and aftermarket Brake Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular ATE 1965 Mercedes-Benz 230SL Brake Parts

When it comes to maintaining or upgrading your 1965 Mercedes-Benz 230SL, using quality Brake Parts is essential to ensure durability and a perfect fit. ATE ticks all of those boxes. We offer a wide selection of ATE Brake Parts, specifically designed for the 1965 Mercedes-Benz 230SL. With over 2 ATE brand Brake Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $43.33, with an average price of just $302.57. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our ATE Brake Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Original Brake Caliper, New - Friction Ready
from
$561.81

(1)

Original Brake Caliper, New – Friction Ready

“Might be great plugs, but not so much in a GM 3.4 V6 Rough idle and early fouling.”

Booster Check Valve
from
$43.33
This product is not rated

Booster Check Valve

“”

Popular Carquest Premium 1965 Mercedes-Benz 230SL Brake Parts

Carquest Premium auto parts is one of the highest quality Brake Part brands in the market. Any 1965 Mercedes-Benz 230SL owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 1965 230SL, Advance Auto Parts carries a full inventory of 1 Carquest Premium Brake Parts. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Carquest Premium Brake Parts range up to $43.99, plus, with more than 20 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Brake Parts below will deliver on both quality and value.

Brake Pads: Ceramic, Long Life and Quiet
from
$43.99

(20)

Brake Pads: Ceramic, Long Life and Quiet

“I do a lot of stop and go driving. These pads have not squealed once and the brake pedal seams a little firmer, but this could be because I also repla”

FAQs for 1965 Mercedes-Benz 230SL Brake Parts

Which Brake Parts are best-sellers for 1965 Mercedes-Benz 230SLs?

Out of 12 Brake Parts that fit 1965 Mercedes-Benz 230SLs, the following parts are the top sellers:

What’s the price range for 1965 Mercedes-Benz 230SL Brake Parts?

Brake Part prices for the 1965 Mercedes-Benz 230SL start at $1.60 and go up to $561.81 for the most premium parts.

What’s the average price of a Brake Part for a 1965 Mercedes-Benz 230SL?

The average price for Brake Parts for the 1965 Mercedes-Benz 230SL is $155.63. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Mercedes-Benz 230SL model years?

Yes, we currently carry Brake Parts for 4 model years of Mercedes-Benz 230SLs between 1963 and 1967. Brake Parts are bought most frequently for the following model years: 1967, 1966, 1964, and 1963.

What are the cheapest Brake Parts for my 1965 Mercedes-Benz 230SL?

The cheapest 1965 Mercedes-Benz 230SL Brake Parts we carry in stock are:

What are the top-rated Brake Parts that fit the 1965 Mercedes-Benz 230SL?

Out of 21 reviews by customers, our 1965 Mercedes-Benz 230SL Brake Parts have an average customer rating of . These are some of the highest-rated Brake Part types for the 1965 Mercedes-Benz 230SL and their top-rated products:

What types of Brake Parts do you sell for my 1965 Mercedes-Benz 230SL?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 1965 Mercedes-Benz 230SL:

Can I get help with 1965 Mercedes-Benz 230SL Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Brake Parts and more.

What is your return policy for Mercedes-Benz 230SL Brake Parts?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz 230SL Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.