1965 Lincoln Continental Performance and Racing Products

Please Select your Vehicle to See Exact Fit Parts

Essential Performance and Racing Products for 1965 Lincoln Continentals

Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

Thermocap Radiator Cap

from

$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Thermocap Radiator Cap

from

$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:
  • Indicates Coolant Temperature
  • Helps to Prevent Injuries from coolant or steam burns
  • Integrated Coolant Reclamation Valve
  • Improves Underhood Appearance
  • Fahrenheit and centigrade readings
  • Various valve pressures available
See More

Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

Ford 1984-98 Eec-Iv Supercoil

from

$86.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Resists Shock And Vibration
  • Resists Corrosion
See More

MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)

Coil; Street Fire; Ford TFI

from

$73.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Bolt-on Performance
  • Factory replacement coil
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Accel – Contact And Condenser Kit (Part No.8203)

Contact And Condenser Kit

from

$89.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.

Product Features:
  • High Performance Points and Condenser
  • With Integral Conductor
See More

Accel – Contact Set Hp 32 Oz (Part No.110228)

Contact Set Hp 32 Oz

from

$53.99
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.

Product Features:
  • Extra Thick Contact Arms
  • Large Radius Tungsten Contacts
  • High Strength Phenolic Rubbing Blocks
  • Prevents Points Float
  • Moisture-Proof Buna-N Condenser
See More

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny

from

$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)

Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR)

from

$437.99
The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
See More

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny

from

$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:
  • Vibratory Polished For Good Looks
See More

Energy Suspension – Strut Rod Bushing Set (Part No.4.7117G)

Strut Rod Bushing Set

from

$34.49
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Strut Rod Bushing Set (Part No.4.7117R)

Strut Rod Bushing Set

from

$34.49
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Energy Suspension – Strut Rod Bushing Set (Part No.4.7118R)

Strut Rod Bushing Set

from

$33.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$34.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Motive Gear – Differential Mini Spool (Part No.MS9-31)

Differential Mini Spool

from

$31.99


Product Features:
  • MINI SPOOL 8″ & 9″ 31 SPLN STL 090431
See More

Powertrax – Lock Right Locker (Part No.1820-LR)

Lock Right Locker

from

$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.F875456)

    Performance Differential Ring and Pinion

    from

    $209.99


    Product Features:
    • FRD 10BLT 7.5 R/P 4.56 MGP
    See More

    Richmond Gear – RngPnn (Part No.69-0369-1)

    RngPnn

    from

    $577.99
    RngPnn

    Motive Gear – PRO Gear Lightweight Differential Ring And Pinion – Small Pinion (Part No.F990543SP)

    PRO Gear Lightweight Differential Ring And Pinion - Small Pinion

    from

    $441.99


    Product Features:
    • R&P FORD 9″ 5.43, 9310 SMALL PIN 28 SPL. PRO
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.F890583)

    Performance Differential Ring and Pinion

    from

    $241.99


    Product Features:
    • FRD 10BLT 9.0 R/P 5.83 MGP
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.F890325)

    Performance Differential Ring and Pinion

    from

    $262.99


    Product Features:
    • FRD 10BLT 9.0 R/P 3.25 MGP
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

    Tie Rod Dust Boot

    from

    $5.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

    Tie Rod Dust Boot

    from

    $6.29
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $5.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Upgrade your 1965 Lincoln Continental with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1965 Lincoln Continental, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lincoln or enhancing its overall performance, Performance and Racing Products are key to keeping your Continental functioning at its best. At Advance Auto Parts, we offer a wide selection of 36 Performance and Racing Products for the 1965 Lincoln Continental, designed to meet your needs without breaking the bank. From Performance Ignition Product replacements to Performance Radiators upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1965 Lincoln Continental at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $819.99, with an average price of $265.90. Our 36 Performance and Racing Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 1965 Lincoln Continental without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Lincoln Continental, we stock popular OEM and aftermarket Performance and Racing Products from top names like Energy Suspension, Holley, Accel, and more. Energy Suspension Performance and Racing Products start at just $5.99 and boast an impressive 4.4 stars average rating from customers. Holley and Accel also bring quality to the table, with Performance and Racing Products available starting at $89.99, and at an average 4.2 stars rating. With 83 customer reviews and counting, our 1965 Lincoln Continental Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1965 Lincoln Continental is always ready to roll. We’re committed to providing you with everything you need to keep your Continental in top shape, all in one place. Start shopping confidently below for your 1965 Lincoln Continental!

    Best-Selling Performance Ignition Products for 1965 Lincoln Continentals

    Enhance the driving experience in your Lincoln with 6 quality Performance Ignition Product components, starting at $34.49.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $95.99
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – Contact And Condenser Kit (Part No.8203)

    Contact And Condenser Kit

    from

    $89.99
    Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.

    Product Features:
    • High Performance Points and Condenser
    • With Integral Conductor
    See More

    MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

    Blaster 2 Coil: High Performance Ignition Upgrade

    from

    $55.99
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

    Product Features:
    • Improved output coil for electronic ignitions
    • Works w/Blaster Ignition Or MSD 5/6/7 Series
    • Ballast Resistor Required If Used w/Stock Points Ignition
    • Alkyd tower w/high dielectric properties lessens carbon tracking
    See More

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $34.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $204.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Accel – Contact Set Hp 32 Oz (Part No.110228)

    Contact Set Hp 32 Oz

    from

    $53.99
    Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.

    Product Features:
    • Extra Thick Contact Arms
    • Large Radius Tungsten Contacts
    • High Strength Phenolic Rubbing Blocks
    • Prevents Points Float
    • Moisture-Proof Buna-N Condenser
    See More

    Most Popular 1965 Lincoln Continental Performance Radiators

    Customize your Lincoln with 1 Performance Radiators products like Performance Radiator Caps, all priced under $55.99.

    Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

    Thermocap Radiator Cap

    from

    $55.99
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Top Picks for 1965 Lincoln Continental Performance Steering Products

    Upgrade Lincoln Continentals with top-quality Performance Steering Products parts, including 3 OEM and aftermarket selections for your 1965 model.

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $5.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

    Tie Rod Dust Boot

    from

    $5.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

    Tie Rod Dust Boot

    from

    $6.29
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    In-Demand Performance Fuel Systems for 1965 Lincoln Continentals

    Select from 4 premium Performance Fuel Systems parts for your 1965 Lincoln Continental, with prices ranging from $509.99 to $819.99.

    Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

    Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny

    from

    $509.99
    Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

    Product Features:
    • Vibratory Polished For Good Looks
    See More

    Holley – Prem Street Carbs (Avengers) (Part No.0-80770)

    Prem Street Carbs (Avengers)

    from

    $716.99
    Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

    Product Features:
    • Vibratory Polished For Good Looks
    • Optimized Street Calibration That Works Out Of The Box
    • Factory Preset Electric Choke For Easy Startups
    • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
    • No Unnecessary Trips Back To The Parts Store
    • Limited Lifetime Warranty
    • 100% Wet Flow Tested By Holley Technicians
    • Arrives Ready To Run
    See More

    Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

    Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny

    from

    $699.99
    Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

    Product Features:
    • Vibratory Polished For Good Looks
    • Optimized Street Calibration That Works Out Of The Box
    • Factory Preset Electric Choke For Easy Startups
    • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
    • No Unnecessary Trips Back To The Parts Store
    • Limited Lifetime Warranty
    • 100% Wet Flow Tested By Holley Technicians
    • Arrives Ready To Run
    See More

    Holley – Off Road Carbs (Part No.0-90670)

    Off Road Carbs

    from

    $819.99
    The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.

    Product Features:
    • Gold Dichromate Finish For Extreme Off Road Environments
    • Single Feed Fuel Inlet For Ease Of Installation
    • Optimized Off-Road Calibration That Works Out-Of-The-Box
    • Factory Preset Electric Choke For Easy Startups
    • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
    • One Piece Off-Road Vent Tube Eliminates Fuel Spillover
    • Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
    • Limited Lifetime Warranty Defects In Material/Workmanship
    See More

    Most Sold 1965 Lincoln Continental Performance Suspension Products

    Explore our best-selling Lincoln parts for the 1965 Continental among 1 OEM and aftermarket options starting from $33.99.

    Energy Suspension – Strut Rod Bushing Set (Part No.4.7118R)

    Strut Rod Bushing Set

    from

    $33.99
    These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

    Product Features:
    • Made from HYPER-Flex Polyurethane
    See More

    Top-Rated Performance and Racing Products Brands For Your 1965 Lincoln Continental

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1965 Lincoln Continentals. Below you’ll find some of our best rated Performance and Racing Products from Energy Suspension, Holley, and Accel, and more. Performance and Racing Products from these brands that fit a 1965 Continental start at just $5.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Energy Suspension 1965 Lincoln Continental Performance and Racing Products

    When it comes to maintaining or upgrading your 1965 Lincoln Continental, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Energy Suspension ticks all of those boxes. We offer a wide selection of Energy Suspension Performance and Racing Products, specifically designed for the 1965 Lincoln Continental. With over 1 Energy Suspension brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99. Plus, with over 3 customer reviews and an average rating of 4.4 stars, you can trust that our Energy Suspension Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
    Tie Rod Dust Boot
    from $5.99
    (3)
    Tie Rod Dust Boot
    “Replaced the old torn boot and added a bit of color for a low cost.”

    Popular Holley 1965 Lincoln Continental Performance and Racing Products

    Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1965 Lincoln Continental owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1965 Continental, Advance Auto Parts carries a full inventory of 3 Holley Performance and Racing Products. Plus you will be keeping your Lincoln in peak condition while saving money because prices on these Holley Performance and Racing Products range from $509.99 to $716.99, plus, with more than 53 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
    Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
    from $509.99
    (45)
    Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
    “very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”
    Prem Street Carbs (Avengers)
    from $716.99
    (2)
    Prem Street Carbs (Avengers)
    “This was the carb that my engine builder suggested.”

    FAQs for 1965 Lincoln Continental Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1965 Lincoln Continentals?

    Out of 36 Performance and Racing Products that fit 1965 Lincoln Continentals, the following parts are the top sellers:

    What’s the price range for 1965 Lincoln Continental Performance and Racing Products?

    Performance and Racing Product prices for the 1965 Lincoln Continental start at $5.99 and go up to $819.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1965 Lincoln Continental?

    The average price for Performance and Racing Products for the 1965 Lincoln Continental is $265.90. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Lincoln Continental model years?

    Yes, we currently carry Performance and Racing Products for 42 model years of Lincoln Continentals between 1958 and 2002. Performance and Racing Products are bought most frequently for the following model years: 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, and 1994.

    What are the cheapest Performance and Racing Products for my 1965 Lincoln Continental?

    The cheapest 1965 Lincoln Continental Performance and Racing Products we carry in stock are:

    What are the top-rated Performance and Racing Products that fit the 1965 Lincoln Continental?

    Out of 83 reviews by customers, our 1965 Lincoln Continental Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1965 Lincoln Continental and their top-rated products:

    What types of Performance and Racing Products do you sell for my 1965 Lincoln Continental?

    Can I get help with 1965 Lincoln Continental Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lincoln Performance and Racing Products and more.

    What is your return policy for Lincoln Continental Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Lincoln Continental Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.