1965 Jensen C-V8 Performance and Racing Products
Find Your Specific 1965 Jensen C-V8 Performance and Racing Products
Below you will find various in-demand Jensen Performance and Racing Products, components and accessories for your 1965 C-V8. Advance Auto Parts has popular C-V8 parts like Performance Exhaust Products, Performance Fuel Systems, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other C-V8 model years including
1963,
1964,
1966 and more. Select a category of 1965 Jensen C-V8 Performance and Racing Products below and start saving instantly.
Popular 1965 Jensen C-V8 Performance and Racing Products Categories
Essential Performance and Racing Products for 1965 Jensen C-V8s
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE REAR MAIN SEAL SET, 2947 (Part No.2947)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Edelbrock – Edelbrock Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1412)
from
$565.99
“The Edelbrock 1412 Performer Series 800 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1412 Performer Series 800 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package”
See More
Edelbrock – Edelbrock Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
Edelbrock – Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)
from
$519.99
“The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Mr. Gasket – Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (Part No.42S)
from
$69.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part No:12S for V8 gasoline applications, part No:12D for diesel applications or part No:12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!.
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1214 (Part No.1214)
from
$46.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1216 (Part No.1216)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1808 (Part No.1808)
from
$18.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1414 (Part No.1414)
from
$42.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Edelbrock – Edelbrock Big-Block Chrysler E-Street Cylinder Heads 84cc, 5093 (Part No.5093)
Edelbrock – Edelbrock Victor RB/ B Big-Block Chrysler Max Wedge Cylinder Head W/ Valves, 77949 (Part No.77949)
from
$1142.99
Edelbrock Victor RB/ B Big-Block Chrysler Max Wedge Cylinder Head W/ Valves, 77949.
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1611 (Part No.1611)
from
$20.29
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
See More
Upgrade your 1965 Jensen C-V8 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1965 Jensen C-V8, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jensen or enhancing its overall performance, Performance and Racing Products are key to keeping your C-V8 functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Performance and Racing Products for the 1965 Jensen C-V8, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Fuel Systems
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1965 Jensen C-V8 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $18.49 to $2,952.00, with
an average price of $499.18.
Our 15 Performance and Racing Products in stock come from 3 trusted brands, so you’re sure to find the right part for your 1965 Jensen C-V8 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Jensen C-V8, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, and more.
Edelbrock Performance and Racing Products
start at just $474.99 and boast an impressive 4.4 stars average rating from customers.
With 39 customer reviews and counting, our 1965 Jensen C-V8 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products
and more to make sure your 1965 Jensen C-V8 is always ready to roll. We’re committed to providing you with everything you need to keep your C-V8 in top shape, all in one place.
Start shopping confidently below for your 1965 Jensen C-V8!
Best-Selling Performance Exhaust Products for 1965 Jensen C-V8s
Enhance the driving experience in your Jensen with 1 quality Performance Exhaust Product components, starting at $42.99.
FEL-PRO Performance – FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1414 (Part No.1414)
from
$42.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Most Popular 1965 Jensen C-V8 Performance Fuel Systems
Customize your Jensen with 7 Performance Fuel Systems products
like Performance Carburetors and
Performance Fuel Pumps, all
priced under $590.99.
Edelbrock – Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)
from
$519.99
“The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Edelbrock – Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)
from
$474.99
“The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1407 Performer Series 750 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Mr. Gasket – Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (Part No.42S)
from
$69.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part No:12S for V8 gasoline applications, part No:12D for diesel applications or part No:12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!.
See More
Edelbrock – Edelbrock Performer 1413 Carburetor: 800 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1413)
from
$590.99
“The Edelbrock 1413 Performer Series 800 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1413 Performer Series 800 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package.”
See More
Edelbrock – Edelbrock Performer 1412 Carburetor: 800 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1412)
from
$565.99
“The Edelbrock 1412 Performer Series 800 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1412 Performer Series 800 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package”
See More
Edelbrock – Edelbrock Performer 14073 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Inlet, Black (Part No.14073)
from
$554.99
“The Edelbrock 14073 Performer Series 750 CFM manual choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 14073 Performer Series 750 CFM manual choke black powder coated carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Edelbrock – Edelbrock Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
Top Picks for 1965 Jensen C-V8 Performance Engines
Upgrade Jensen C-V8s with top-quality Performance Engines parts, including 7 OEM and aftermarket selections for your 1965 model.
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1808 (Part No.1808)
from
$18.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1214 (Part No.1214)
from
$46.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1216 (Part No.1216)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE REAR MAIN SEAL SET, 2947 (Part No.2947)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Edelbrock – Edelbrock Big-Block Chrysler E-Street Cylinder Heads 84cc, 5093 (Part No.5093)
Edelbrock – Edelbrock Victor RB/ B Big-Block Chrysler Max Wedge Cylinder Head W/ Valves, 77949 (Part No.77949)
from
$1142.99
Edelbrock Victor RB/ B Big-Block Chrysler Max Wedge Cylinder Head W/ Valves, 77949.
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1611 (Part No.1611)
from
$20.29
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
See More
Top-Rated Performance and Racing Products Brands For Your 1965 Jensen C-V8
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1965 Jensen C-V8s. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, and more. Performance and Racing Products from these brands that fit a 1965 C-V8 start at just $474.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1965 Jensen C-V8 Performance and Racing Products
When it comes to maintaining or upgrading your 1965 Jensen C-V8, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1965 Jensen C-V8. With over 2 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $474.99, with an average price of just $497.49. Plus, with over 10 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$519.99
(3)
Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“i put this carb on my dump truck and i couldn’t be more pleased. my truck runs great and has better mpg and increased power”
from
$474.99
(7)
Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”
FAQs for 1965 Jensen C-V8 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1965 Jensen C-V8s?
Out of 15 Performance and Racing Products that fit 1965 Jensen C-V8s, the following parts are the top sellers:
- FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1808 (19781040) – $18.49
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1214 (19781963) – $46.99
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1216 (19781397) – $29.99
What’s the price range for 1965 Jensen C-V8 Performance and Racing Products?
Performance and Racing Product prices for the 1965 Jensen C-V8 start at $18.49 and go up to $2,952.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1965 Jensen C-V8?
The average price for Performance and Racing Products for the 1965 Jensen C-V8 is $499.18. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jensen C-V8 model years?
What are the cheapest Performance and Racing Products for my 1965 Jensen C-V8?
The cheapest 1965 Jensen C-V8 Performance and Racing Products we carry in stock are:
- FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1808 (19781040) – $18.49
- FEL-PRO Performance PERFORMANCE VALVE COVER GASKET SET, 1611 (19781395) – $20.29
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1216 (19781397) – $29.99
- FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1414 (5990947) – $42.99
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1214 (19781963) – $46.99
What are the top-rated Performance and Racing Products that fit the 1965 Jensen C-V8?
Out of 39 reviews by customers, our 1965 Jensen C-V8 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1965 Jensen C-V8 and their top-rated products:
- Performance Fuel Systems
- Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (17140004) – $519.99
- Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020557) – $474.99
- Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (5400317) – $69.99
- Performance Engines
- Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (17140004) – $519.99
- Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020557) – $474.99
- Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (5400317) – $69.99
What types of Performance and Racing Products do you sell for my 1965 Jensen C-V8?
As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1965 Jensen C-V8:
Can I get help with 1965 Jensen C-V8 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jensen Performance and Racing Products and more.
What is your return policy for Jensen C-V8 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jensen C-V8 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
