1965 Glas 1204 Car Parts & Accessories

Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Product Features:

• Solid-state Worry Free Electronics
• Internal Pressure Regulating
• Universal Design Allows For Easy Installation
• No DiaphraGMs Or Mechanical Parts To Wear Out
• Makes An Excellent Fuel Transfer or Booster Pump
• Hose Barbs Fit 5/16″ Fuel Hose
• Self-priming, 2 wire design
• Eliminates vapor lock and flooding

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

• Helps avoid premature fuel pump failure
• Lint free towel included
• Low suds formulation
• Removes harmful contaminants from the fuel tank

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:

• Copper Plus – Dependable Performance and Durability
• Copper core center electrode allows for accurate control of heat range for longer life
• Superior corrosion resistance
• Built to ISO and SAE standards for proven performance
• Built to ISO and SAE standards for proven performance

With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite continues to set the standard in spark plug technology. Designed and engineered in the USA, these spark plugs feature a copper-glass seal that bonds the insulator, terminal post, and center electrode together, ensuring full required voltage at the spark gap with a 100% leak-proof, gas-tight seal. The multi-rib insulator reduces the risk of flash-over, while the one-piece terminal post adds strength and durability. Additionally, the built-in resistor minimizes radio frequency interference (RFI) and electrode erosion, making these spark plugs a reliable choice for enhancing your vehicle’s performance.

Product Features:

• Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
• Multi-rib insulator reduces danger of “flash-over”
• One-piece terminal post adds strength
• Resistor reduces radio frequency interference (RFI) and electrode erosion
• Quick Starts and Smooth Acceleration: The Autolite Copper Spark Plug is engineered to deliver quick starts and smooth acceleration, enhancing your vehicle’s overall performance.
• Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you achieve better fuel economy, saving you money at the pump.

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

• Black Onyx coating helps reduce corrosion
• Copper core provides great heat transfer and helps maximize plug durability
• Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
• Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
• Available for use in Marine applications
• Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
• ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies
• High-Quality Copper Core: Designed with a high-quality copper core to ensure reliable and efficient performance.
• Nickel Alloy Electrode Tip: Features a nickel alloy center electrode tip for enhanced durability and performance.
• Outstanding Suppression Characteristics: Engineered with superior suppression characteristics to deliver consistent and reliable performance.
• Premium Aftermarket Replacement: Manufactured to meet high standards of fit, form, and function, providing a dependable replacement option for many vehicles.

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.

Product Features:

• High nickel alloy side electrode maintains precise gap
• Full platinum tip assures virtually no gap erosion for long life
• Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

• Works to optimize engine performance for a longer life and improved fuel economy
• OE design
• Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
• Platinum ball welding process provides a consistent point of contact for enhanced adhesion

Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:

• Copper Plus – Dependable Performance and Durability
• Copper core center electrode allows for accurate control of heat range for longer life
• Superior corrosion resistance
• Built to ISO and SAE standards for proven performance
• Built to ISO and SAE standards for proven performance

Autolite® Iridium XP Enhanced Alloy Technology Spark Plugs is one of the brand’s most technologically advanced spark plugs ever. These spark plugs provide better durability and a more focused ignition for better overall ignitability and optimum performance. Autolite® spark plugs are the best alternativ e to OE spark plugs, offering OE form, fit and function for all makes and models, both foreign and domestic, at a value price. Autolite provides the automotive aftermarket and original equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs.

BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Manufactured using high-quality materials to provide superior durability and long service life
• Designed and engineered to ensure precise performance
• A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
• Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
• As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards

ACDelco Gold (Professional) RAPIDFIRE Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These RAPIDFIRE Single Platinum Performance Spark Plugs are designed for everyday use and are a high quality replacement for many vehicles on the road today. These premium aftermarket spark plugs have high-quality suppressors that help prevent misfiring, an improved plug to boot seal, and a pure copper core for greater durability. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

• Solid state suppressor, with two-piece glass and brass seal, can help reduce radio frequency interference, regulates spark energy for long electrode life, and helps protect against high combustion pressures
• Pure copper core provides great heat transfer and helps maximize plug durability
• Platinum on center electrode enables superior spark characteristics and can reduce voltage requirements of the ignition system
• Ribless insulator helps optimize plug to boot seal
• Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
• Premium aftermarket replacement part
• Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
• High-Quality Suppressors: These spark plugs are equipped with high-quality suppressors that help prevent misfiring, ensuring smooth and efficient engine operation.

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
• Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure confidence and product reliability, every time.

Champion® Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.

Product Features:

• Champion Iridium – Maximum Performance. Premium Spark Plug
• Iridium center electrode delivers maximum life
• Fine-wire center electrode and V-trimmed for greater ignitability
• V-trimmed ground electrode promotes sharper spark focus
• Maintains stable operating temperature under all engine loads
• Heat-Active┐ alloy allows electrodes to reach optimal temperature quickly

Product Features:

• Universal designed to fit most washer pumps
• Includes Reservoir
• Includes all mounting hardware

Product Features:

• Universal design to fit most washer pumps
• Does not include reservoir
• GM mounting kit

ACI windshield washer pumps are manufactured to meet or exceed original equipment performance. The quality, durability, and reliability of all products are backed by nearly 40 years of excellence in Windshield Washer components experience and know how.

Product Features:

• Universal switch for windshield washer system