1965 Dodge Custom Valve Cover and Cylinder Heads

Product Features:

• Use W/ Valve Springs Part #5792
• Use W/ Locks Part #9612
• 1.50 in. Outside Diameter
• Steel Material
• Black Oxide Finish

Edelbrock part #97483 high performance hydraulic roller lifters for Big-Block Chrysler 383-400-440 Engines are the perfect match for street and high performance applications. With unsurpassed tolerance capable of high rpm power, these precision self-align

Product Features:

• For Big-Block Chrysler (383-400-440)
• With Tie Bar
• Shorter Than Stock Pushrods Are Required To Retrofit
• 8 Sets of 2
• Made In The USA

The Edelbrock #5093 E-Street cylinder heads are designed for use with 1961-1979 Chrysler 361-440 c.i.d. Wedge engine applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads featur

Product Features:

• Complete Pair For Hydraulic Flat Tappet
• 84cc Combustion Chamber Volume
• 210cc Intake/70cc Exhaust Runner Volume
• 2.14 in. Intake/1.81 in. Exhaust Valve Diameter
• 0.625 in. Deck Thickness

The Edelbrock No. 5090 E-Street cylinder heads are designed for use with 1961-1979 Chrysler 361-440 c.i.d. Wedge engine applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and are designed for entry-level street performance applications operating in the idle-to-5500 rpm range. The modern combustion chamber designs improve the combustion process and larger than stock intake and exhaust ports move more air through your engine for improve efficiency. For use on pre-pollution controlled vehicles only.

CYL HEADS-RACE

The Edelbrock No. 60185 Performer RPM head is designed for use with 1961-79 Chrysler 361-440 c.i.d. Wedge engine applications. The Edelbrock No. 60185 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

The Edelbrock #60919 Performer RPM NHRA Stock/Super Stock Bare cylinder head is designed for 1961-79 Chrysler 361-440 c.i.d. Wedge engine applications. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. Cast and heat trea

Product Features:

• Bare Single For NHRA Super Stock
• 82-84cc Combustion Chamber Volume
• 210cc Intake/70cc Exhaust Runner Volume
• Standard Exhaust Port Location
• 0.625 in. Deck Thickness

The Edelbrock part #77949 Big Block Chrysler Max Wedge Victor Series cylinder head is used by many of the best racers in the country and are the best choice for all-out competition. Edelbrock engineers work with leading racers like Billy Glidden, John Uri

Product Features:

• Bare Single With Valves
• 72cc Combustion Chamber Volume
• 280cc Intake/100cc Exhaust Runner Volume
• 2.2 in. Intake/1.81 in. Exhaust Valve Diameter
• 0.625 in. Deck Thickness

The Edelbrock No. 60829 Performer RPM cylinder head is designed for 1961-79 Chrysler 361-440 c.i.d. Wedge engine applications. The Edelbrock No. 60829 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

Product Features:

• Out-of-the-Box Bolt-On Performance
• Flow 290 cfm On Intake
• 217 cfm On Exhaust
• Angled Spark Plugs For Superior Combustion

The Edelbrock No. 60925 Performer RPM cylinder head is designed for 1961-79 Chrysler 361-440 c.i.d. Wedge engine applications. The Edelbrock No. 60925 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

Product Features:

• Standard intake and exhaust port location
• Does not include damper spring and rocker arms
• Features 210cc intake ports and 70cc exhaust ports
• Numerous machined surfaces to provide a precision fit to mating parts
• Includes intake valves, exhaust valves, valve springs, retainers, locks, valve stem seals, rocker arm studs and guide plates

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

• High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
• Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
• Rated At 180,000 Psi Tensile Strength
• High Performance Head Bolts Are Stronger

The Edelbrock #4491 Signature Series Valve Covers are designed for Chrysler 361-383-400-413-426-440 V8 ’58-79 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Product Features:

• Big Block Chrysler 383-440
• Short
• Chrome Steel
• Set Of Two
• Rubber Grommets For Breather

Made of chrome plated steel. Smooth top with original equipment height and internal baffle. Features one breather/oil filler cap opening per valve cover. Hardware and gaskets sold separately.

Product Features:

• Fits Chrysler big block
• Chrome plated steel construction
• Sold as a pair
• Long Lasting Durability
• Cadmium Plated To Resist Corrosion
• Easy Installation

The Edelbrock No. 4276 Elite II Valve Covers are designed for Chrysler Big-Block 383/440 applications. This new line of Elite II valve covers feature a design that is influenced by the original Elite Series originally released in 1985, but with a new modern take on this classic look. They’re made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Our tall profile valve covers are 2″ taller than stock, and clear most roller rockers and valvetrain components. Our low profile valve covers clear all air-conditioning, alternator brackets and aluminum rockers. Overall height is measured from gasket flange to top at the highest point.