1965 Dodge Custom Performance and Racing Products
Find Your Specific 1965 Dodge Custom Performance and Racing Products
Below you will find various in-demand Dodge Performance and Racing Products, components and accessories for your 1965 Custom. Advance Auto Parts has popular Custom parts like Performance Ignition Products, Performance Fuel Systems, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Custom model years including
1955,
1956,
1957,
1958,
1959,
1960,
1961,
1962,
1964 and more. Select a category of 1965 Dodge Custom Performance and Racing Products below and start saving instantly.
Popular 1965 Dodge Custom Performance and Racing Products Categories
Essential Performance and Racing Products for 1965 Dodge Customs
Mr. Gasket – Valve Cover Gasket Set (Part No.378)
from
$42.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
MSD Ignition – Wire Set; Black Super Conductor; Chrysler 383-440 HEI for MSD Distributor (Part No.32733)
from
$194.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9734)
from
$96.99
Product Features:
See More
- Use W/ Valve Springs Part #5792
- Use W/ Locks Part #9612
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$149.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)
from
$382.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s
Product Features:
See More
Product Features:
- Ratchet Action Shifter
- Cable Operated
- Quick Installation
- Accurate Shifting
- Reverse Lockout Feature
Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)
from
$49.99
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.
Product Features:
See More
Product Features:
- Advance the cam for increased torque and horsepower
- Tune your powerband for more end torque or increase top end horsepower
- Includes (4) offset bushings and (1) 0 degree bushing
- Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
- Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
- Increase Top-End Horsepower
Mr. Gasket – Precision Timing Tape (Part No.1593)
from
$22.29
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.
Product Features:
See More
Product Features:
- 7 1¿4″ diameter
- 7 1┐4″ diameter
- 383 thru 440 cu. in.
- Increased Performance
- Set Valve Lash At Proper Time
MSD Ignition – Distributor; Chrysler 383; 400 Pro-Billet (Part No.8545)
from
$538.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- Smaller diameter CNC machined billet aluminum housing
- Billet aluminum base clears aftermarket heads and valve covers
- Must Be Used w/An MSD Ignition Control
- Supplied w/small dia. cap w/HEI style terminals; race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Mechanical advance assembly can be locked out for crank trigger systems
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2947)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$179.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam (Part No.23-601-9)
from
$531.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 8 Piece Set (Part No.1215)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$20.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam K-Kit (Part No.K21-600-5)
from
$837.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1106)
from
$152.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer RPM Series fuel pump is for Big-Block Chrysler (Part No.1723)
from
$205.99
Edelbrock part #1723 Performer RPM Series fuel pump is for Big-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage po
See More
Mr. Gasket – High Performance Thermostat (Part No.4367)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1808)
from
$18.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Valve Cover (Part No.9807)
from
$111.99
Made of chrome plated steel. Smooth top with original equipment height and internal baffle. Features one breather/oil filler cap opening per valve cover. Hardware and gaskets sold separately.
Product Features:
See More
Product Features:
- Fits Chrysler big block
- Chrome plated steel construction
- Sold as a pair
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Upgrade your 1965 Dodge Custom with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1965 Dodge Custom, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your Custom functioning at its best. At Advance Auto Parts, we offer a wide selection of 101 Performance and Racing Products for the 1965 Dodge Custom, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Fuel Systems
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1965 Dodge Custom at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.99 to $1,160.00, with
an average price of $276.70.
Our 101 Performance and Racing Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 1965 Dodge Custom without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Dodge Custom, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, Holley, B & M, and more.
Edelbrock Performance and Racing Products
start at just $394.99 and boast an impressive 4.4 stars average rating from customers.
Holley and B & M also bring quality to the table, with Performance and Racing Products available starting at $306.99, and at an average 4.2 stars rating.
With 322 customer reviews and counting, our 1965 Dodge Custom Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1965 Dodge Custom is always ready to roll. We’re committed to providing you with everything you need to keep your Custom in top shape, all in one place.
Start shopping confidently below for your 1965 Dodge Custom!
Best-Selling Performance Ignition Products for 1965 Dodge Customs
Enhance the driving experience in your Dodge with 6 quality Performance Ignition Product components, starting at $34.49.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
MSD Ignition – Wire Set; Black Super Conductor; Chrysler 383-440 HEI for MSD Distributor (Part No.32733)
from
$194.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$179.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Most Popular 1965 Dodge Custom Performance Fuel Systems
Customize your Dodge with 8 Performance Fuel Systems products
like Performance Fuel Pumps and
Performance Carburetors, all
priced under $819.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)
from
$437.99
The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
See More
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Edelbrock – Performer RPM Series fuel pump is for Big-Block Chrysler (Part No.1723)
from
$205.99
Edelbrock part #1723 Performer RPM Series fuel pump is for Big-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage po
See More
Top Picks for 1965 Dodge Custom Performance Exhaust Products
Upgrade Dodge Customs with top-quality Performance Exhaust Products parts, including 2 OEM and aftermarket selections for your 1965 model.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1414)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1462)
from
$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
In-Demand Performance Engines for 1965 Dodge Customs
Select from 74 premium Performance Engines parts for your 1965 Dodge Custom, with prices ranging from $8.99 to $1,160.00.
Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)
from
$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with .530″ guides and 3/8″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1808)
from
$18.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – High Performance Thermostat (Part No.4367)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 8 Piece Set (Part No.1214)
from
$46.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 8 Piece Set (Part No.1215)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$20.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 4 Piece Set (Part No.1216)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1009)
from
$66.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2947)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Intake Gasket (Part No.301)
from
$42.99
Mr. Gasket Performance Series intake gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Performance Material – Cellulose/Nitrile Composition
- .060″ Thick
- Can Be Trimmed To Meet Your Specifications
Mr. Gasket – Precision Timing Tape (Part No.1593)
from
$22.29
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.
Product Features:
See More
Product Features:
- 7 1¿4″ diameter
- 7 1┐4″ diameter
- 383 thru 440 cu. in.
- Increased Performance
- Set Valve Lash At Proper Time
Competition Cams – Endure-X Solid Roller Lifter Set for Chrysler 383-440/426 HEMI (Part No.87019-16)
from
$1160.00
Endure-X Solid Roller Lifter Set for Chrysler 383-440/426 HEMI
Competition Cams – ENGINE ROCKER ARM (Part No.1621-16)
from
$1054.99
ENGINE ROCKER ARM
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam K-Kit (Part No.K21-600-5)
from
$837.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Xtreme Energy 236/242 Solid Roller Cam for Chrysler 383-440 (Part No.23-700-9)
from
$782.99
Xtreme Energy 236/242 Solid Roller Cam for Chrysler 383-440
Competition Cams – Xtreme Energy 244/252 Solid Flat Cam and Lifter Kit for Chrysler 383-440 (Part No.CL21-232-4)
from
$716.99
Xtreme Energy 244/252 Solid Flat Cam and Lifter Kit for Chrysler 383-440
Edelbrock – CH-6B Six-Pack Intake Manifold for Chrysler RB Series Engines (Part No.2475)
from
$679.99
Designed for 440 c.i.d. Chrysler engines with 3×2-bbl, carbs, also fits 413 and 426 Wedge. #2475 is stock replacement/street legal part for 440 V8s with OEM 3×2-bbl. carbs; 1968-71. This manifold was original equipment on Chrysler 440 Six-Pack engines, Chrysler #P04529056. Will not fit 1962-64 Max Wedge heads.
Product Features:
See More
Product Features:
- Famous 6-Pack Intake
- OEM For Factory Six Pack Engines
- Designed for 2500 to 6500 RPM Performance
- Manifold has a Balanced 180+ Firing Order
- Smooth and Consistent Part-Throttle Power
- Offers Excellent Performance Potential
- Match with Other Dual-Quad Items for Total Package
Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam K-Kit (Part No.K21-223-4)
from
$678.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Xtreme Energy HI-LIFT 231/237 Hydraulic Flat Cam and Lifter Kit Chrysler 383-440 (Part No.CL21-227-4)
from
$598.99
Xtreme Energy HI-LIFT 231/237 Hydraulic Flat Cam and Lifter Kit Chrysler 383-440
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam (Part No.23-601-9)
from
$531.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Thumpr 227/241 Hydraulic Roller Cam (Part No.23-600-9)
from
$531.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Edelbrock – CH-28 Chrysler Big Block RB Dual-Quad Intake Manifold (Part No.5440)
from
$530.99
Product Features:
See More
- Designed for 1500 to 6000 RPM Performance
- Manifold has a Balanced 180+ Firing Order
- Smooth and Consistent Part-Throttle Power
- Offers Excellent Performance Potential
- Carburetor Center-To-Center Dimensions 6.4375 in
- Match with Other Dual-Quad Items for Total Package
Competition Cams – Xtreme Energy 242/248 Solid Roller Cam for Chrysler 383-440 (Part No.23-701-9)
from
$505.99
Xtreme Energy 242/248 Solid Roller Cam for Chrysler 383-440
Most Sold 1965 Dodge Custom Performance Distributors
Explore our best-selling Dodge parts for the 1965 Custom among 1 OEM and aftermarket options starting from $538.99.
MSD Ignition – Distributor; Chrysler 383; 400 Pro-Billet (Part No.8545)
from
$538.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- Smaller diameter CNC machined billet aluminum housing
- Billet aluminum base clears aftermarket heads and valve covers
- Must Be Used w/An MSD Ignition Control
- Supplied w/small dia. cap w/HEI style terminals; race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Mechanical advance assembly can be locked out for crank trigger systems
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
Top-Rated Performance and Racing Products Brands For Your 1965 Dodge Custom
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1965 Dodge Customs. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, Holley, and B & M, and more. Performance and Racing Products from these brands that fit a 1965 Custom start at just $306.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1965 Dodge Custom Performance and Racing Products
When it comes to maintaining or upgrading your 1965 Dodge Custom, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1965 Dodge Custom. With over 2 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $394.99, with an average price of just $416.49. Plus, with over 11 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$437.99
(1)
Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR)
“works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not ”
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“i have delt with every auto parts dealer there is and advance allways treats me like im their only custemer, thanks guys and gals!!!”
Popular Holley 1965 Dodge Custom Performance and Racing Products
Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1965 Dodge Custom owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1965 Custom, Advance Auto Parts carries a full inventory of 3 Holley Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Holley Performance and Racing Products range from $509.99 to $716.99, plus, with more than 53 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$509.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”
from
$699.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
“great carb”
FAQs for 1965 Dodge Custom Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1965 Dodge Customs?
Out of 101 Performance and Racing Products that fit 1965 Dodge Customs, the following parts are the top sellers:
- Intake Manifold Bolts (6120970) – $18.29
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- High Performance Thermostat (22903643) – $31.99
What’s the price range for 1965 Dodge Custom Performance and Racing Products?
Performance and Racing Product prices for the 1965 Dodge Custom start at $8.99 and go up to $1,160.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1965 Dodge Custom?
The average price for Performance and Racing Products for the 1965 Dodge Custom is $276.70. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Dodge Custom model years?
What are the cheapest Performance and Racing Products for my 1965 Dodge Custom?
The cheapest 1965 Dodge Custom Performance and Racing Products we carry in stock are:
- Hardened Lash Cap with 3/8" Valve Stem, .190" Head Height (50289460) – $8.99
- 10 Degree Steel Retainer for 26120 Beehive Spring (50289146) – $10.99
- Dust Cap (22901302) – $14.29
- Intake Manifold Bolts (6120970) – $18.29
- PERFORMANCE OIL PAN GASKET SET (19781040) – $18.49
What are the top-rated Performance and Racing Products that fit the 1965 Dodge Custom?
Out of 322 reviews by customers, our 1965 Dodge Custom Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1965 Dodge Custom and their top-rated products:
- Performance Fuel Systems
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
- Prem Street Carbs (Avengers) (17120683) – $716.99
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- Performance Shifters
- Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (6340008) – $509.99
- Prem Street Carbs (Avengers) (17120683) – $716.99
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
What types of Performance and Racing Products do you sell for my 1965 Dodge Custom?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1965 Dodge Custom:
Can I get help with 1965 Dodge Custom Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.
What is your return policy for Dodge Custom Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Dodge Custom Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
