1965 Chrysler New Yorker Drivetrains

Essential Drivetrains for 1965 Chrysler New Yorkers

National – Multi Purpose Seal (Part No.5126)

Multi Purpose Seal

from

$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25"

from

$10.99
7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:
  • U-Joint strap bolt
  • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
  • 7290 u-joint size
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.25R)

Differential Bearing Kit - Koyo

from

$102.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG.&SEAL CHRYS. 8.25
See More

Motive Gear – Differential Ring and Pinion (Part No.C9.25-355)

Differential Ring and Pinion

from

$286.99


Product Features:
  • CHRY 12BLT 9.25 R&P-3.55 RATIO
See More

Driveworks – Taper Bearing Set (Part No.S-A-17)

Taper Bearing Set

from

$9.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

from

$17.99
Product Features:
  • Pinion depth shims for Dana Spicer 60 and 70U
See More

Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)

1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts

from

$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.

Product Features:
  • u-joint strap kit
  • Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
  • 1310 and 1330 u-joint size
  • Includes two straps and four bolts
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

Greaseable Premium Universal Joint

from

$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21408)

1541H Alloy Rear Axle For Chrysler 8.75"

from

$284.99
Yukon 1541H alloy cut to fit rear axle for Chrysler 8.75″ measuring 28″-32″ with 30 splines and 5×4.5 bolt pattern. for use with A, C & E-Body. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Must use Green bearing.

Product Features:
  • Fits Chrysler 8.75″
  • 30 spline
  • Cut to length design fits 28″-32″ applcations
  • 5 x 4.5″ bolt pattern
See More

Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)

Spindle Washer - I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each)

from

$14.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

Powertrax – Lock Right Locker (Part No.1240-LR)

Lock Right Locker

from

$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    National – Bearings (Part No.M804049)

    Bearings

    from

    $38.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Ring Gear Bolt (Part No.1304)

    Ring Gear Bolt

    from

    $7.99


    Product Features:
    • CHRY 8 3/4″ RING GEAR BOLTS C 8.25″
    See More

    Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)

    8.75" Chrysler Gasket

    from

    $12.99
    8.75″ Chrysler gasket.

    Product Features:
    • Dropout gasket
    • Fits Chrysler 8.75″
    See More

    USA Standard Gear – Spartan Locker For Chrysler 8.25" With 29 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17038)

    Spartan Locker For Chrysler 8.25" With 29 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

    from

    $799.99
    The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

    Product Features:
    • Fits Chrysler 8.25″ with 29 spline axles
    • Made from 9310 steel for added strength
    • Replaces the spiders in a standard carrier case
    See More

    Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

    Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25"

    from

    $15.99
    Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

    Product Features:
    • Side adjuster lock bolt
    • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
    See More

    Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#89) Differential (Part No.13007)

    Pinion Install Kit For Chrysler 8.75" (#89) Differential

    from

    $289.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits Chrysler 8.75″ ’89’ case
    • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    USA Standard Gear – Chrysler 8.25" Spartan Locker Cross Pin Shaft (Part No.17035)

    Chrysler 8.25" Spartan Locker Cross Pin Shaft

    from

    $49.99
    Product Features:
    • USA Standard Gear heavy-duty cross pin shaft
    • Fits Chrylser 8.25″ with 27 and 29 spline axles
    • Works with Spartan Locker or standard open spider gears
    See More

    Pro-King – Crush Sleeve (Part No.721A034)

    Crush Sleeve

    from

    $2.89
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

    Bearing Race Driver Set, 21 Piece

    from

    $1566.99
    21 Piece bearing race driver set. (Box wt: 140lbs) No return.

    Product Features:
    • Bearing race driver set
    • 21 pieces
    • All steel construction
    See More

    Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

    Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

    from

    $67.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

    Product Features:
    • Powr Lok button kit
    • Fits Dana Spicer 30, 44 and Chrysler 8.75″
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)

    Axle Seal, For 1559 Or 6408 Bearing

    from

    $7.99
    Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.

    Product Features:
    • Rear axle seal
    • 2.530″ O.D.
    See More

    Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)

    Chrysler 8.75" (Coarse Spline) Pinion Nut Washer

    from

    $9.99
    Chrysler 8.75″ (coarse spline) pinion nut washer.

    Product Features:
    • Pinion nut washer
    • Fits Chrysler 8.75″ with 10 spline pinion
    See More

    Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

    Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

    from

    $37.99
    Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

    Product Features:
    • Redi-Sleeve yoke saver
    • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
    See More

    Yukon Gear – Yoke For Chrysler 8.25" With A 1310 U/Joint Size (Part No.41010)

    Yoke For Chrysler 8.25" With A 1310 U/Joint Size

    from

    $289.99
    Yukon yoke for Chrysler 8.25″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps, with outside snap rings for the Jeep Cherokee. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.25″
    • 27 spline
    • 1310 u-joint size
    • Outside snap ring design
    • 3.219″ snap ring span
    • 1.062″ cap diameter
    • Strap style
    See More

    Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

    Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25"

    from

    $26.99
    Product Features:
    • Pinion nut
    • Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion
    See More

    Upgrade your 1965 Chrysler New Yorker with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1965 Chrysler New Yorker, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Drivetrains are key to keeping your New Yorker functioning at its best. At Advance Auto Parts, we offer a wide selection of 166 Drivetrains for the 1965 Chrysler New Yorker, designed to meet your needs without breaking the bank. From Drive Shafts and Axle replacements to Differentials upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1965 Chrysler New Yorker at great prices. Our Drivetrains inventory for this model ranges from just $1.49 to $1,566.99, with an average price of $179.43. Our 166 Drivetrains in stock come from 14 trusted brands, so you’re sure to find the right part for your 1965 Chrysler New Yorker without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Chrysler New Yorker, we stock popular OEM and aftermarket Drivetrains from top names like Spicer, Moog, Driveworks, and more. Spicer Drivetrains start at just $36.99 and boast an impressive 5 stars average rating from customers. Moog and Driveworks also bring quality to the table, with Drivetrains available starting at $4.99, and at an average 4 stars rating. With 327 customer reviews and counting, our 1965 Chrysler New Yorker Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1965 Chrysler New Yorker is always ready to roll. We’re committed to providing you with everything you need to keep your New Yorker in top shape, all in one place. Start shopping confidently below for your 1965 Chrysler New Yorker!

    Best-Selling Drive Shafts and Axles for 1965 Chrysler New Yorkers

    Enhance the driving experience in your Chrysler with 9 quality Drive Shafts and Axle components, starting at $8.99.

    Yukon Gear – 8.75" Chrysler Inner Axle Seal, Use With Set7 (Part No.30198)

    8.75" Chrysler Inner Axle Seal, Use With Set7

    from

    $8.99
    8.75″ Chrysler inner axle seal, use w/set7.Yukon Mighty seal.

    Product Features:
    • Rear inner axle seal
    • Fits Chrysler 8.75″ rear
    • Tapered rolling bearing design only
    See More

    Yukon Gear – 8.75" Chrysler Outer Axle Seal, Use With Set7 (Part No.30199)

    8.75" Chrysler Outer Axle Seal, Use With Set7

    from

    $15.99
    8.75″ Chrysler outer axle seal, use w/set7.Yukon Mighty seal.

    Product Features:
    • Rear outer axle seal
    • Fits Chrysler 8.75″ rear
    • Tapered rolling bearing design only
    See More

    Yukon Gear – Chrysler 8.75" Rear Axle Bearing And Seal Kit (Part No.10052)

    Chrysler 8.75" Rear Axle Bearing And Seal Kit

    from

    $314.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. 8.75″ Chrysler axle bearing adjuster & seal kit Right hand adjuster, left hand plate, axle bearings & seals. Services both sides.

    Product Features:
    • Fits Chrysler 8.75″ rear
    • Includes axle bearing, inner and outer axle seals, retaining plate, adjuster and adjuster plate
    • Services both sides
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56072)

    The Carrier Bearing Puller

    from

    $883.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    See More

    Yukon Gear – Fill Plug For Chrysler 8.75", 3/4" Thread (Part No.33462)

    Fill Plug For Chrysler 8.75", 3/4" Thread

    from

    $9.99
    Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality

    Product Features:
    • Fill plug
    • Fits Chrysler 8.75″
    See More

    Yukon Gear – Extra HD Yoke For Chrysler 8.75" With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41015)

    Extra HD Yoke For Chrysler 8.75" With 29 Spline Pinion And A 1350 U/Joint Size

    from

    $209.99
    Yukon extra HD yoke for Chrysler 8.75″ with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″
    • 29 spline
    • 1350 u-joint size
    • Outside snap ring design
    • 3.625″ snap ring span
    • 1.188″ cap diameter
    • U-bolt style
    See More

    Yukon Gear – Chrysler 8.75" Rear Axle Bearing And Seal Kit (Part No.10051)

    Chrysler 8.75" Rear Axle Bearing And Seal Kit

    from

    $196.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. 8.75″ Chrysler axle bearing adjuster & seal kit. This axle bearing & seal kit services one side only.

    Product Features:
    • Fits Chrysler 8.75″
    • Includes adjuster, adjuster plate, retainer plate and axle seal
    • Services one side
    See More

    Yukon Gear – Chrysler 8.75" Rear Axle Bearing And Seal Kit (Part No.10046)

    Chrysler 8.75" Rear Axle Bearing And Seal Kit

    from

    $157.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle sealed ball bearing (one side) for 8.75″ Chrysler. Not recommended for truck or racing applications. This axle bearing & seal kit services one side only.

    Product Features:
    • Fits Chrysler 8.75″ rear
    • Includes one sealed axle bearing
    • Services one side
    See More

    Yukon Gear – Chrysler 8.75" Rear Axle Bearing And Seal Kit (Part No.10047)

    Chrysler 8.75" Rear Axle Bearing And Seal Kit

    from

    $142.99
    Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing with inner and outer seals (one side) for 8.75″ Chrysler. This axle bearing & seal kit services one side only.

    Product Features:
    • Fits Chrysler 8.75″ rear
    • Includes axle bearing and inner and outer axle seals
    • Services one side
    See More

    Most Popular 1965 Chrysler New Yorker Differentials

    Customize your Chrysler with 123 Differentials products like Differential Oil, Rear Differential Cover Gaskets, and Differential Bearings, all priced under $1,566.99.

    National – Bearings (Part No.HM89443)

    Bearings

    from

    $38.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Felpro – Differential Carrier Gasket (Part No.RDS 6583)

    Differential Carrier Gasket

    from

    $6.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Motive Gear – Differential Crush Sleeve (Part No.3507575)

    Differential Crush Sleeve

    from

    $2.49


    Product Features:
    • CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000
    See More

    Motive Gear – Differential Carrier Gear Kit (Part No.C7.25BI)

    Differential Carrier Gear Kit

    from

    $108.99


    Product Features:
    • CHRYSLER 7.25″ INTERNAL KIT
    See More

    Motive Gear – Pinion Nut (Part No.1260823)

    Pinion Nut

    from

    $8.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    National – Bearings (Part No.205)

    Bearings

    from

    $20.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    National – Bearings (Part No.25520)

    Bearings

    from

    $8.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

    Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

    from

    $37.99
    Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

    Product Features:
    • Redi-Sleeve yoke saver
    • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
    See More

    Motive Gear – Ring Gear Bolt (Part No.1304)

    Ring Gear Bolt

    from

    $7.99


    Product Features:
    • CHRY 8 3/4″ RING GEAR BOLTS C 8.25″
    See More

    Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)

    Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front

    from

    $8.99
    Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.

    Product Features:
    • Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
    • 3/8″ x 24 thread
    • .866″ long
    See More

    National – Bearings (Part No.HM89410)

    Bearings

    from

    $11.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1104)

    Differential Pinion Shim Kit

    from

    $12.99


    Product Features:
    • KIT SHIM
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    National – Bearings (Part No.HM803110)

    Bearings

    from

    $22.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Pinion Nut (Part No.33142)

    Pinion Nut

    from

    $10.99
    Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

    Product Features:
    • Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
    • 7/8″ x 14 thread
    See More

    Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)

    Preload Shim Kit For Chrysler 8.75" & Ford 9"

    from

    $21.99
    8.75″ Chrysler & 9″ Ford preload shim kit.

    Product Features:
    • Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

    Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25"

    from

    $26.99
    Product Features:
    • Pinion nut
    • Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1109)

    Differential Pinion Shim Kit

    from

    $13.49


    Product Features:
    • KIT SHIM TOYO TRK 79-92 REAR/89-92 FRONT
    See More

    Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)

    8.75" Chrysler Gasket

    from

    $12.99
    8.75″ Chrysler gasket.

    Product Features:
    • Dropout gasket
    • Fits Chrysler 8.75″
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    National – Bearings (Part No.HM803149)

    Bearings

    from

    $36.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-HM-89443)

    Tapered Roller Bearing

    from

    $20.29
    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

    Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25"

    from

    $15.99
    Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

    Product Features:
    • Side adjuster lock bolt
    • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
    See More

    Yukon Gear – Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7290 U/Joint Size (Part No.41009)

    Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7290 U/Joint Size

    from

    $156.99
    Yukon yoke for Chrysler 8.75″ with 29 spline pinion and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″
    • 29 spline
    • 7290 u-joint size
    • 2.625″ snap ring span
    • 1.125″ cap diameter
    • Inside snap ring design
    • Strap style
    See More

    Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

    Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

    from

    $39.99
    8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

    Product Features:
    • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
    See More

    Yukon Gear – Powr Lok Belleville Clutch Plate, Splined (Part No.16174)

    Powr Lok Belleville Clutch Plate, Splined

    from

    $36.99
    Product Features:
    • Belleville plate, splined
    • Fits Dana Spicer 44 Powr Lok
    See More

    Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Smooth (Part No.16152)

    Replacement Clutch Set For Dana 44 Powr Lok, Smooth

    from

    $177.99
    Product Features:
    • Clutch kit
    • Fit Dana Spicer 44 and Chrysler 8.75″ Powr Lok positraction
    • Smooth design
    See More

    Yukon Gear – Crush Sleeve Eliminator Kit For Chrysler 8.75" (Part No.55039)

    Crush Sleeve Eliminator Kit For Chrysler 8.75"

    from

    $86.99
    8.75″ Chrysler 89 solid crush sleeve replacement spacer, preload. This item is compatible with ’89 case dropouts only.

    Product Features:
    • Crush sleeve eliminator kit for Chrysler 8.75″ with ’89’ case housing
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-HM-803149)

    Tapered Roller Bearing

    from

    $23.49
    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

    Replacement Pinion Depth Shims For Dana 60, 61 & D70-U

    from

    $17.99
    Product Features:
    • Pinion depth shims for Dana Spicer 60 and 70U
    See More

    Motive Gear – Differential Pinion Seal (Part No.8516N)

    Differential Pinion Seal

    from

    $10.99
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-HM-803110)

    Tapered Roller Bearing

    from

    $13.49
    Product Features:
    • Brand may vary by location
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)

    Tapered Roller Bearing

    from

    $4.99
    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

    Bearing Race Driver Set, 21 Piece

    from

    $1566.99
    21 Piece bearing race driver set. (Box wt: 140lbs) No return.

    Product Features:
    • Bearing race driver set
    • 21 pieces
    • All steel construction
    See More

    USA Standard Gear – Power Lok Positraction for Chrysler 8.75" (Part No.59027)

    Power Lok Positraction for Chrysler 8.75"

    from

    $1015.00
    USA Standard Gear Power Lok posi for Chrysler 8.75″, smooth design

    Product Features:
    • Gear Power Lok Posi LSD
    • Fits Chrysler 8.75″
    • Smooth design
    • Positraction
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Yukon Gear – Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case (Part No.32052)

    Chrysler 8.75" "89" Housing Nodular Iron Drop Out Case

    from

    $564.99
    89 housing nodular Iron Drop Out case, up to 500 HP, Billet adjuster for 8.75″ Chrysler. This dropout does not come with fill plug (Part number CHY612017).

    Product Features:
    • Fits Chrysler 8.75″
    • ’89’ case design
    • Nodular iron for added strength
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 4.11 Ratio (Part No.24240)

    High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 4.11 Ratio

    from

    $519.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

    Product Features:
    • Fits Chrysler 8.75″ “89” case housing
    • 8.75″ ring gear diameter
    • 29 spline pinion
    • 12 ring gear bolts
    • 4.11 ratio
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 3.90 Ratio (Part No.24011)

    High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 3.90 Ratio

    from

    $519.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

    Product Features:
    • Fits Chrysler 8.75″ “89” case housing
    • 8.75″ ring gear diameter
    • 29 spline pinion
    • 12 ring gear bolts
    • 3.90 ratio
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 4.56 Ratio (Part No.24242)

    High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 4.56 Ratio

    from

    $519.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a fine spline pinion which takes a 29 spline yoke.

    Product Features:
    • Fits Chrysler 8.75″ “89” case housing
    • 8.75″ ring gear diameter
    • 29 spline pinion
    • 12 ring gear bolts
    • 4.56 ratio
    See More

    USA Standard Gear – 8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron (Part No.59001)

    8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron

    from

    $474.99
    Product Features:
    • Dropout housing
    • Fits Chrylser 8.75″
    • ’89’ case design
    • Nodular iron for added strength
    See More

    Yukon Gear – Master Overhaul Kit For Chrysler 8.75" #42 Housing With 25520/90 Differential Bearings (Part No.14010)

    Master Overhaul Kit For Chrysler 8.75" #42 Housing With 25520/90 Differential Bearings

    from

    $474.99
    Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

    Product Features:
    • Fits Chrysler 8.75″ ’42’ case with 25520 carrier races
    • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, thread locker, marking compound with brush, and gasket.
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 42 Housing In A 4.11 Ratio (Part No.24229)

    High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 42 Housing In A 4.11 Ratio

    from

    $472.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a coarse spline pinion which takes a 10 spline yoke.

    Product Features:
    • Fits Chrysler 8.75″ “42” case housing
    • 8.75″ ring gear diameter
    • 10 spline pinion
    • 12 ring gear bolts
    • 4.11 ratio
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 3.73 Ratio (Part No.24239)

    High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 3.73 Ratio

    from

    $469.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a fine spline pinion which takes a 29 spline yoke.

    Product Features:
    • Fits Chrysler 8.75″ “89” case housing
    • 8.75″ ring gear diameter
    • 29 spline pinion
    • 12 ring gear bolts
    • 3.73 ratio
    See More

    Yukon Gear – Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings (Part No.14007)

    Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings

    from

    $459.99
    Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

    Product Features:
    • Fits Chrysler 8.75″ ’42’ case housing with LM104912 carrier races
    • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, thread locker, marking compound with brush, and gasket.
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 3.23 Ratio (Part No.24238)

    High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 3.23 Ratio

    from

    $459.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a fine spline pinion which takes a 29 spline yoke.

    Product Features:
    • Fits Chrysler 8.75″ “89” case housing
    • 8.75″ ring gear diameter
    • 29 spline pinion
    • 12 ring gear bolts
    • 3.23 ratio
    See More

    Top Picks for 1965 Chrysler New Yorker Spindles

    Upgrade Chrysler New Yorkers with top-quality Spindles parts, including 7 OEM and aftermarket selections for your 1965 model.

    Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)

    Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In.

    from

    $3.49
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

    Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm

    from

    $4.99
    This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)

    Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each)

    from

    $4.99
    This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

    Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each)

    from

    $3.99
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-016.1)

    Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In.

    from

    $8.99
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Nut 3/4 In.-16 Hex 1-1/16 In. (sold by each) (Part No.615-016)

    Spindle Nut 3/4 In.-16 Hex 1-1/16 In. (sold by each)

    from

    $6.99
    This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)

    Spindle Washer - I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each)

    from

    $14.29
    This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

    Product Features:
    • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
    • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
    • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
    See More

    In-Demand Universal Joints for 1965 Chrysler New Yorkers

    Select from 26 premium Universal Joints parts for your 1965 Chrysler New Yorker, with prices ranging from $3.99 to $213.99.

    Spicer – Universal Joint (Part No.5-213X)

    Universal Joint

    from

    $39.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
    See More

    Driveworks – Universal Joint (Part No.DW-315G)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.317)

    Greaseable Premium Universal Joint

    from

    $26.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

    Greaseable Premium Universal Joint

    from

    $25.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Driveworks – Universal Joint (Part No.DW-354)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)

    Non-Greaseable Super Strength Universal Joint

    from

    $32.99
    Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
    • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    See More

    MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)

    Greaseable Super Strength Universal Joint

    from

    $36.99
    Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
    • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    See More

    Neapco – Universal Joint (Part No.2-4801)

    Universal Joint

    from

    $7.89
    Universal Joint
    See More

    Neapco – Universal Joint (Part No.2-4800)

    Universal Joint

    from

    $4.59
    Universal Joint
    See More

    Driveworks – Universal Joint (Part No.DW-270)

    Universal Joint

    from

    $15.99
    DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

    Product Features:
    • The cross is hot forged for the higher torque and horsepower
    • The bearing cups are made by cold forging, having higher strength and better rigidity
    • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
    • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
    • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
    • Snap rings are held to strict tolerances to ensure proper cup position and retention
    • Nitrile rubber seals to optimize grease retention and reduce contamination
    See More

    MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.315G)

    Greaseable Premium Universal Joint

    from

    $28.99
    Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

    Product Features:
    • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
    • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
    • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
    • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
    • Cross forging shape and flash provide easier installation and high strength
    See More

    Brute Force – Universal Joint (Part No.2-4800BF)

    Universal Joint

    from

    $5.49
    Universal Joint – Brute Force
    See More

    Spicer – Universal Joint (Part No.5-1330X)

    Universal Joint

    from

    $37.99
    You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
    See More

    Spicer – Universal Joint (Part No.5-789X)

    Universal Joint

    from

    $42.99
    When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
    See More

    Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

    1350 To 1410 Conversion U/Joint

    from

    $78.99
    Yukon 1350 to 1410 conversion u/joint.
    See More

    Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

    1350 Lifetime Series U/Joint

    from

    $63.99
    Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25" (Part No.41013)

    7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25"

    from

    $52.99
    7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25″, 8.25″, 8.75″, and 9.25″.

    Product Features:
    • u-joint strap kit
    • Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
    • 7290 u-joint size
    • Includes two straps and four bolts
    See More

    Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

    1350 U/Joint With Zerk Fitting

    from

    $51.99
    Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7260 U/Joint Size (Part No.41006)

    Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7260 U/Joint Size

    from

    $213.99
    Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7260 U/joint size. 2.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″
    • 10 spline
    • 7260 u-joint size
    • Inside snap ring design
    • 2.125″ snap ring span
    • 1.078″ cap diameter
    • Strap style
    See More

    Yukon Gear – Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7260 U/Joint Size (Part No.41007)

    Yoke For Chrysler 8.75" With 29 Spline Pinion And A 7260 U/Joint Size

    from

    $188.99
    Yukon yoke for Chrysler 8.75″ with 29 spline pinion and a 7260 U/joint size. 3.125″ snap ring span, 1.078″ cap diameter. Inside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler 8.75″
    • 29 spline
    • 7260 u-joint size
    • 2.125″ snap ring span
    • 1.078″ cap diameter
    • Inside snap ring design
    • Strap style
    See More

    Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

    1350 To Mechanics 3R Adaptor U/Joint

    from

    $111.99
    Yukon 1350 to Mechanics 3R adaptor U/joint.
    See More

    Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)

    7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25

    from

    $49.99
    7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.

    Product Features:
    • u-joint strap kit
    • Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
    • 7260 u-joint size
    • Includes two straps and four bolts
    See More

    Spicer – Universal Joint (Part No.5-3228X)

    Universal Joint

    from

    $46.99
    Universal Joint

    Spicer – Universal Joint (Part No.5-1330-1X)

    Universal Joint

    from

    $36.99
    Universal Joint

    Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

    7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25"

    from

    $10.99
    7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

    Product Features:
    • U-Joint strap bolt
    • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
    • 7290 u-joint size
    See More

    Neapco – Universal Joint (Part No.1-6301)

    Universal Joint

    from

    $3.99
    Universal Joint
    See More

    Most Sold 1965 Chrysler New Yorker Transfer Cases

    Explore our best-selling Chrysler parts for the 1965 New Yorker among 1 OEM and aftermarket options starting from $1.49.

    Felpro – Engine Oil Pump Cover Seal (Part No.13338)

    Engine Oil Pump Cover Seal

    from

    $1.49
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Engineered and manufactured specifically for the repair environment
    • Unsurpassed quality you can trust
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Top-Rated Drivetrains Brands For Your 1965 Chrysler New Yorker

    Shop for the best-rated brands offering Drivetrains and other products for your 1965 Chrysler New Yorkers. Below you’ll find some of our best rated Drivetrains from Spicer, Moog, and Driveworks, and more. Drivetrains from these brands that fit a 1965 New Yorker start at just $4.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Spicer 1965 Chrysler New Yorker Drivetrains

    When it comes to maintaining or upgrading your 1965 Chrysler New Yorker, using quality Drivetrains is essential to ensure durability and a perfect fit. Spicer ticks all of those boxes. We offer a wide selection of Spicer Drivetrains, specifically designed for the 1965 Chrysler New Yorker. With over 5 Spicer brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.99, with an average price of just $40.99. Plus, with over 5 customer reviews and an average rating of 5 stars, you can trust that our Spicer Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Universal Joint
    from
    $42.99
    This product is not rated

    Universal Joint

    “”

    Universal Joint
    from
    $46.99
    This product is not rated

    Universal Joint

    “”

    Universal Joint
    from
    $37.99
    This product is not rated

    Universal Joint

    “”

    Popular Moog 1965 Chrysler New Yorker Drivetrains

    Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 1965 Chrysler New Yorker owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 1965 New Yorker, Advance Auto Parts carries a full inventory of 5 Moog Drivetrains. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Moog Drivetrains range from $25.99 to $36.99, plus, with more than 210 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    Greaseable Premium Universal Joint
    from
    $25.99

    (143)

    Greaseable Premium Universal Joint

    “Good product”

    Non-Greaseable Super Strength Universal Joint
    from
    $32.99

    (30)

    Non-Greaseable Super Strength Universal Joint

    “Working great.”

    Greaseable Premium Universal Joint
    from
    $26.99

    (1)

    Greaseable Premium Universal Joint

    “the u-joint itself fit fine however the grease fitting is too large for the hole provided in the u-joint. I had to enlarge the hole to fit the fitting”

    FAQs for 1965 Chrysler New Yorker Drivetrains

    Which Drivetrains are best-sellers for 1965 Chrysler New Yorkers?

    Out of 166 Drivetrains that fit 1965 Chrysler New Yorkers, the following parts are the top sellers:

    What’s the price range for 1965 Chrysler New Yorker Drivetrains?

    Drivetrain prices for the 1965 Chrysler New Yorker start at $1.49 and go up to $1,566.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1965 Chrysler New Yorker?

    The average price for Drivetrains for the 1965 Chrysler New Yorker is $179.43. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Chrysler New Yorker model years?

    Yes, we currently carry Drivetrains for 51 model years of Chrysler New Yorkers between 1942 and 1996. Drivetrains are bought most frequently for the following model years: 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

    What are the cheapest Drivetrains for my 1965 Chrysler New Yorker?

    The cheapest 1965 Chrysler New Yorker Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1965 Chrysler New Yorker?

    Out of 327 reviews by customers, our 1965 Chrysler New Yorker Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1965 Chrysler New Yorker and their top-rated products:

    What types of Drivetrains do you sell for my 1965 Chrysler New Yorker?

    Can I get help with 1965 Chrysler New Yorker Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Drivetrains and more.

    What is your return policy for Chrysler New Yorker Drivetrains?

    Advance Auto Parts keeps returns simple. For new Chrysler New Yorker Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.