1965 Chevrolet Malibu Body Parts

Below you will find various in-demand Chevrolet Body Parts, components and accessories for your 1965 Malibu. Advance Auto Parts has popular Malibu parts like Vehicle Latches and Handles, Vehicle Hoods, Bodies and Fender Parts and more. You’ll also find aftermarket and OEM Body Parts for other Malibu model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 1965 Chevrolet Malibu Body Parts below and start saving instantly.

Popular 1965 Chevrolet Malibu Body Parts Categories

Body Mounts

Rear Bumpers

Windshield and Hardware

Exterior Door Handles

Door Pillar Post Seals

Convertible Top Seals

Door Window Glass Run Channels

Floor Pan Reinforcements

Deck Lid Strikers

Door Hinge Bolts

Essential Body Parts for 1965 Chevrolet Malibus

from

$186.99

New Goodmark Rear Body Panel, Center Section, Excludes Wagon

Product Features:

Center Section Excludes Wagon
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$209.99

DOOR MIRROR

from

$55.99

New Goodmark Driver Side Rear Wheel Opening Molding, For Malibu And SS Models, Made Of Aluminum

Product Features:

For Malibu And SS Models Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$63.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Quarter Glass Seals are the highest quality reproductions available. With molded curves and a non-wrinkling lip design. Other brands do not compare. Rear Roll-Up Window Seals, for 2-Door Hardtops and Convertibles. Made with steel cores. 14-3/4 In. long. Pair.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$86.99

New Goodmark Driver Side Trunk Floor, 23 1/2 Inches Wide X 40 1/2 Inches Long

Product Features:

23 1/2 Inches Wide X 40 1/2 Inches Long
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$17.99

New Goodmark 4 Piece Rubber Door Bumper Kit

Product Features:

Made Of Rubber
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$122.99

New Goodmark Floor Reinforcement Front Brace Floor Pan Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$78.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Tailgate Seals that all have that show winning look and fit. Our Tailgate Seals have a perfect fit. Tailgate Seal for 4-Door Station Wagons. Each.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$27.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Butyl Glass Setting Tape. Used to install windshields and backlights. Superior sealing properties. 5/16 In. wide X 15 Ft. long. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$22.29

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Rocker Panel Plug. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$36.99

New Goodmark Trunk Floor Brace Driver Side, For Body Bushing

Product Features:

For Body Bushing
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$142.99

New Goodmark Rear Body Crossmember

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$42.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$18.99

Ameriseal’s 96″ Flexible Window Glass Run Channel For Application- 1960-1967 GM Mid Size Car is an anti-rattle channel made of high-grade rubber. With a sturdy and durable build, you can be sure to have it in a good condition even in the long run. It is designed to be easily installed by anybody by simply replacing any worn-out and old window glass run channel.

Product Features:

Flexible model
Flocked lining system
All-Rubber body

from

$112.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Vent Window Seals. For 2-door hardtop and convertibles. Pair. R&L.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$9.49

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Side Bumper. Each.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$80.99

New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield

Product Features:

57 Inch X 2 Inch Between Dash And Windshield
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$271.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals. For 4-door sedan only. Pair. R&L.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$5.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$73.99

New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece, Except Wagon/El Camino

Product Features:

2 Piece Except Wagon/El Camino
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$26.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vertical Glass Run Channel. Pair.

Product Features:

Jet black to match the color of the original part
Dense rubber flocked to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$14.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Fits a 1/4 In. hole. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$356.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s Convertible Top Seals all have that show winning look and fit. Our Convertible Top Seals all incorporate steel cores and studs for a perfect fit. Molded Roof Rail Seals, for Convertibles. 5-Piece set includes all right and left side top rail seals and windshield top header seal (HD 728).

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$105.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Front Roof Rail Seals. Fits 4-door station wagon and 4-door pillared hardtop sedans. Pair.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$156.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$14.49

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. 1-1/8 In. high X 15/16 In. wide X 7/8 In. long. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$8.79

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$26.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Used on lower leading edge of quarter window. Highly detailed, made with steel cores. Pair. R&L.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

Upgrade your 1965 Chevrolet Malibu with Top-Quality Body Parts

When it comes to maintaining or upgrading your 1965 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Body Parts are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 62 Body Parts for the 1965 Chevrolet Malibu, designed to meet your needs without breaking the bank. From Vehicle Latches and Handle replacements to Vehicle Hoods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1965 Chevrolet Malibu at great prices. Our Body Parts inventory for this model ranges from just $4.49 to $356.99, with an average price of $73.73. Our 62 Body Parts in stock come from 5 trusted brands, so you’re sure to find the right part for your 1965 Chevrolet Malibu without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Chevrolet Malibu, we stock popular OEM and aftermarket Body Parts from top names like Metro Mould, and more. Metro Mould Body Parts start at just $4.49 and boast an impressive 5 stars average rating from customers. With 5 customer reviews and counting, our 1965 Chevrolet Malibu Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1965 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place. Start shopping confidently below for your 1965 Chevrolet Malibu!

Best-Selling Vehicle Latches and Handles for 1965 Chevrolet Malibus

Enhance the driving experience in your Chevrolet with 1 quality Vehicle Latches and Handle components, starting at $11.29.

show more show less

from

$11.29

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door Handle Mounting Pads. 4-Piece Set

Product Features:

Jet black to match the color of the original part
Flat Gasket
Exact fit
High quality original equipment replacement part
Made in the USA

Most Popular 1965 Chevrolet Malibu Vehicle Hoods

Customize your Chevrolet with 3 Vehicle Hoods products like Cowl Seals and Hood Buffers, all priced under $18.99.

show more show less

from

$18.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Cowl and Hood Seal. 43-1/2 In. long. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$11.79

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Bumper. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$9.49

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Side Bumper. Each.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

Top Picks for 1965 Chevrolet Malibu Bodies and Fender Parts

Upgrade Chevrolet Malibus with top-quality Bodies and Fender Parts parts, including 19 OEM and aftermarket selections for your 1965 model.

show more show less

from

$148.99

Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$156.99

Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$186.99

New Goodmark Rear Body Panel, Center Section, Excludes Wagon

Product Features:

Center Section Excludes Wagon
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$155.99

New Goodmark Floor Reinforcement Rear Brace Floor Pan Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$148.99

Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$142.99

New Goodmark Rear Body Crossmember

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$122.99

New Goodmark Floor Reinforcement Front Brace Floor Pan Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$118.99

New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$113.99

New Goodmark Cab Floor Rear Passenger Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated

Product Features:

Under Rear Seat 30 Inch X 26 Inch EDP Coated
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$112.99

New Goodmark Cab Floor Rear Driver Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated

Product Features:

Under Rear Seat 30 Inch X 26 Inch EDP Coated
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$108.99

New Goodmark Body Mount Set, 10 Bushings, Except Convertible/Wagon/El Camino/SS

Product Features:

10 Bushings Except Convertible/Wagon/EL Camino/SS
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$94.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$92.99

New Goodmark Passenger Side T Board Patch

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$92.99

New Goodmark Driver Side T Board Patch

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$80.99

New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield

Product Features:

57 Inch X 2 Inch Between Dash And Windshield
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$79.99

New Goodmark Passenger Side Rear Lower Quarter Panel, 7 3/4 Inches High X 29 1/2 Inches Long

Product Features:

7 3/4 Inches High X 29 1/2 Inches Long
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$79.99

New Goodmark Driver Side Rear Lower Quarter Panel, 7 3/4 Inches High X 29 1/2 Inches Long

Product Features:

7 3/4 Inches High X 29 1/2 Inches Long
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$73.99

New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece, Except Wagon/El Camino

Product Features:

2 Piece Except Wagon/El Camino
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$55.99

New Goodmark Driver Side Rear Wheel Opening Molding, For Malibu And SS Models, Made Of Aluminum

Product Features:

For Malibu And SS Models Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

In-Demand Vehicle Doors for 1965 Chevrolet Malibus

Select from 10 premium Vehicle Doors parts for your 1965 Chevrolet Malibu, with prices ranging from $4.49 to $195.99.

show more show less

from

$10.49

from

$195.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Front Molded Door Seals with Clips. For 4-door sedans and station wagons. Replaces OEM #4540546/7. Each. is 124-1/2 In. long. Pair. R&L.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$195.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door sedans only. Replaces OEM #4895420/1. Each. is 115-1/2 In. long. Pair. R&L.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$78.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Finely crafted and detailed. All of Metro’s Door Lock Pillar Seals are the best available anywhere. They are the best, with molded-in steel cores and superbly detailed outer rubber. Windshield Pillar Post Seals for Convertibles. Two pieces, 24-1/2 In. long. Pair.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$78.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door station wagons only. Each. is 117-1/2 In. long. Pair. R&L.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$78.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Seal, with Clips and Molded Ends. For 2-Door Sedans. Replaces OEM #4892622/3. Pair.

Product Features:

Jet black to match the color of the original part
There’s no need to slam when you use Metro SUPERsoft weatherstripping products
Exact fit
High quality original equipment replacement part
Made in the USA

from

$75.99

New Goodmark 24 Piece Door Hinge Bolt Set

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$75.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Seal for Convertibles. Pair.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$29.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Used on lower leading edge of quarter window. Highly detailed, made with steel cores. Pair. R&L.

Product Features:

Jet black to match the color of the original part
Dense material to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

from

$4.49

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.

Product Features:

Jet black to match the color of the original part
Dense rubber to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

Most Sold 1965 Chevrolet Malibu Vehicle Windows

Explore our best-selling Chevrolet parts for the 1965 Malibu among 1 OEM and aftermarket options starting from $26.99.

show more show less

from

$26.99

Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vertical Glass Run Channel. Pair.

Product Features:

Jet black to match the color of the original part
Dense rubber flocked to match the original
Exact fit
High quality original equipment replacement part
Made in the USA

Top-Rated Body Parts Brands For Your 1965 Chevrolet Malibu

Shop for the best-rated brands offering Body Parts and other products for your 1965 Chevrolet Malibus. Below you’ll find some of our best rated Body Parts from Metro Mould, and more. Body Parts from these brands that fit a 1965 Malibu start at just $4.49 and are rated as high as 5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Metro Mould 1965 Chevrolet Malibu Body Parts

When it comes to maintaining or upgrading your 1965 Chevrolet Malibu, using quality Body Parts is essential to ensure durability and a perfect fit. Metro Mould ticks all of those boxes. We offer a wide selection of Metro Mould Body Parts, specifically designed for the 1965 Chevrolet Malibu. With over 33 Metro Mould brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.49, with an average price of just $57.99. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our Metro Mould Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$14.99

This product is not rated

License Plate Bracket

“”

from
$356.99

This product is not rated

Convertible Top Seal

“”

from
$195.99

This product is not rated

Door Seal

“”

FAQs for 1965 Chevrolet Malibu Body Parts

Which Body Parts are best-sellers for 1965 Chevrolet Malibus?

Out of 62 Body Parts that fit 1965 Chevrolet Malibus, the following parts are the top sellers:

License Plate Bracket (10443005) – $14.99
Door Jamb Switch (12522316) – $10.49
Body Mount Set (22907917) – $156.99

What’s the price range for 1965 Chevrolet Malibu Body Parts?

Body Part prices for the 1965 Chevrolet Malibu start at $4.49 and go up to $356.99 for the most premium parts.

What’s the average price of a Body Part for a 1965 Chevrolet Malibu?

The average price for Body Parts for the 1965 Chevrolet Malibu is $73.73. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Chevrolet Malibu model years?

Yes, we currently carry Body Parts for 42 model years of Chevrolet Malibus between 1964 and 2024. Body Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Body Parts for my 1965 Chevrolet Malibu?

The cheapest 1965 Chevrolet Malibu Body Parts we carry in stock are:

Door Stop (10443208) – $4.49
License Plate Bracket (10442951) – $6.99
Deck Lid Stop Buffer (10442981) – $7.79
Fuel Door Rubber Stop (10442813) – $8.79
Hood Stop Buffer (10442802) – $9.49

What are the top-rated Body Parts that fit the 1965 Chevrolet Malibu?

Out of 5 reviews by customers, our 1965 Chevrolet Malibu Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 1965 Chevrolet Malibu and their top-rated products:

Windshields
- Windshield Seal (10443126) – $27.99

What types of Body Parts do you sell for my 1965 Chevrolet Malibu?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 1965 Chevrolet Malibu:

Can I get help with 1965 Chevrolet Malibu Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Body Parts and more.

What is your return policy for Chevrolet Malibu Body Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1965 Chevrolet Malibu Body Parts

KAI – Rear Body Panel (Part No.GMK4030850641)

KAI – DOOR MIRROR (Part No.GM1321538)

KAI – Wheel Arch Trim (Part No.GMK403095565L)

Metro Mould – Quarter Glass Seal (Part No.VS 3-J)

KAI – Trunk Floor (Part No.GMK403072064L)

KAI – Door Stop (Part No.GMK403240368S)

KAI – Floor Reinforcement (Part No.GMK4030517641)

Metro Mould – Tailgate Seal (Part No.TG 15)

Metro Mould – Windshield Seal (Part No.BT 1)

Metro Mould – Door Plug (Part No.HF 73)

KAI – Trunk Floor Brace (Part No.GMK403074064L)

KAI – Frame Crossmember (Part No.GMK403079064)

Dorman – Help – Exterior Door Handle (Part No.79797)

AmeriSeal – Flexible Window Glass Run Channel 96" Length (Part No.10871)

Metro Mould – Vent Glass Seal (Part No.WR 2013)

Metro Mould – Hood Stop Buffer (Part No.HF 38)

KAI – Dash Panel Patch (Part No.GMK403052164)

Metro Mould – Door Seal (Part No.LM 16-S/R)

Carquest Premium – Door Jamb Switch (Part No.SAA3753)

KAI – Liftgate Seal (Part No.GMK403071464S)

Metro Mould – Window Channel (Part No.VR 2010)

Metro Mould – License Plate Bracket (Part No.SB 75)

Metro Mould – Convertible Top Seal (Part No.RR 1611)

Metro Mould – Hardtop Moulding (Part No.RR 5019-S)

Energy Suspension – Body Mount Set (Part No.3.4112G)

Metro Mould – Door Stop (Part No.DB 33)

Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)

Metro Mould – Door Window Seal (Part No.ALP 5000)

Metro Mould – Exterior Door Handle Gasket (Part No.UM 2005-100)

Metro Mould – Cowl Seal (Part No.CS 4)

Metro Mould – Hood Stop Buffer (Part No.HF 5)

Metro Mould – Hood Stop Buffer (Part No.HF 38)

Energy Suspension – Body Mount Set (Part No.3.4111R)

Energy Suspension – Body Mount Set (Part No.3.4112G)

KAI – Rear Body Panel (Part No.GMK4030850641)

KAI – Floor Reinforcement (Part No.GMK4030517643)

Energy Suspension – Body Mount Set (Part No.3.4111G)

KAI – Frame Crossmember (Part No.GMK403079064)

KAI – Floor Reinforcement (Part No.GMK4030517641)

KAI – Floor Reinforcement (Part No.GMK4030517642)

KAI – Floor Pan (Part No.GMK403051164R)

KAI – Floor Pan (Part No.GMK403051164L)

KAI – Body Mount Set (Part No.GMK4030990641S)

Metro Mould – Hardtop Moulding (Part No.RR 5000)

KAI – Floor Pan Toe Board (Part No.GMK403037064R)

KAI – Floor Pan Toe Board (Part No.GMK403037064L)

KAI – Dash Panel Patch (Part No.GMK403052164)

KAI – Quarter Panel (Part No.GMK403069064R)

KAI – Quarter Panel (Part No.GMK403069064L)

KAI – Liftgate Seal (Part No.GMK403071464S)

KAI – Wheel Arch Trim (Part No.GMK403095565L)

Carquest Premium – Door Jamb Switch (Part No.SAA3759)

Metro Mould – Door Seal (Part No.LM 12-P)

Metro Mould – Door Seal (Part No.LM 12-Q)

Metro Mould – Door Pillar Post Seal (Part No.CZ 8108)

Metro Mould – Door Seal (Part No.LM 12-Q/W)

Metro Mould – Door Seal (Part No.LM 12-D)

KAI – Door Hinge Bolt (Part No.GMK403040264S)

Metro Mould – Door Window Seal (Part No.ALP 5500)

Metro Mould – Door Window Seal (Part No.ALP 5001)

Metro Mould – Door Stop (Part No.SB 35)

Metro Mould – Window Channel (Part No.VR 2010)