1965 Chevrolet Impala Camshafts

Essential 1965 Chevrolet Impala Camshafts

Cloyes Gear – Engine Camshaft Thrust Button (Part No.9-5189)

Engine Camshaft Thrust Button

from

$18.79
Camshaft Thrust Button utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:
  • Fully Rollerized Operation
  • Heat-Treated Steel
  • Needle Roller Bearing
  • Meet or exceed OEM performance requirements
See More

Mr. Gasket – Cam Button Spacer (Part No.1183)

Cam Button Spacer

from

$14.99
These Mr. Gasket cam buttons are an absolute necessity for roller cam installations and useful to maintain accuracy in any cam installation. Cam buttons keep the camshaft from moving in and out and causing erratic timing. A camshaft button, or camshaft thrust bumper installs into the hole in the front end of the camshaft and prevents camshaft walk in roller camshaft applications. Flat tappet cams are ground with a small angle in the lobes that puts a side load on the camshaft. Without this a camshaft has a natural tendency to move or walk, out of the block when rotating. Roller cam lobes can’t be ground that way so engines originally equipped that way usually use a retainer plate to secure them. The camshaft button serves the same purpose, but it does so by contacting the timing cover to prevent further movement. A worn or missing cam thrust bumper will result in too much end play, resulting in timing issues.

Product Features:
  • Mandatory to prevent cam walk in roller cam conversions
  • Helps maintain accurate timing
  • Made from aluminum
See More

Cloyes Gear – Engine Camshaft Thrust Button (Part No.9-5193)

Engine Camshaft Thrust Button

from

$14.99
Camshaft Thrust Button utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:
  • Fully Rollerized Operation
  • Heat-Treated Steel
  • Needle Roller Bearing
  • Meet or exceed OEM performance requirements
See More

Mahle – Camshaft Retainer (Part No.A4355425751MAH)

Camshaft Retainer

from

$31.69
Camshaft Retainer

Victor Reinz – Engine Camshaft Retainer Plate (Part No.71-17533-00)

Engine Camshaft Retainer Plate

from

$29.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

National – Shaft Repair Sleeve (Part No.99176)

Shaft Repair Sleeve

from

$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Cloyes Performance – Engine Camshaft Thrust Washer (Part No.9-203)

Engine Camshaft Thrust Washer

from

$13.99
Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engiine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.

Product Features:
  • Heat Treated Steel Bearing Race Material
  • Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
  • Prevents Wear On Engine Block
  • Can be Used to Repair a Damaged Engine Block Thrust Surface.
See More

Felpro – CAMSHAFT THRUST PLATE SEAL SET (Part No.ES 73115)

CAMSHAFT THRUST PLATE SEAL SET

from

$41.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Cloyes Performance – Engine Camshaft Thrust Plate (Part No.9-220B)

Engine Camshaft Thrust Plate

from

$18.99
0.150″ Thick. Bronze Thrust Washer.

Product Features:
  • 0.150″ Thick
  • Bronze Thrust Washer.
See More

Dorman – Steel Cup Expansion Plug 2-3/32 In., Height 0.530 (sold by each) (Part No.555-085)

Steel Cup Expansion Plug 2-3/32 In., Height 0.530 (sold by each)

from

$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278 (Part No.362566.1)

Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278

from

$2.29
This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (Part No.555-030.1)

Steel Cup Expansion Plug 1-5/8 In., Height 0.500

from

$2.79
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1235M 1)

Engine Camshaft Bearing Set

from

$30.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Advance And Retard Cam Bushings

from

$42.49
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:
  • Advance the cam for increased torque and horsepower
  • Tune your powerband for more end torque or increase top end horsepower
  • Includes (4) offset bushings and (1) 0 degree bushing
  • Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
  • Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
  • Increase Top-End Horsepower
See More

Sealed Power – Engine Camshaft Bearing Set (Part No.1466M)

Engine Camshaft Bearing Set

from

$41.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Steel-backed Babbitt lining material
  • Used in automotive and high-performance
  • Babbitt is designed to perform under extreme loads w/o damaging other engine parts
  • Babbitt is more environmentally friendly than other material
  • ISO & QS certified manufacturing
See More

ARP Auto Racing – Chevy Geniii/Ls Series Small Block, 20 Mm Under Head L, 10 Mm Socket Size (Part No.134-1002)

Chevy Geniii/Ls Series Small Block, 20 Mm Under Head L, 10 Mm Socket Size

from

$9.99
Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:
  • Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
  • Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
  • Increased Material Strength Overcomes Valve Train Harmonics And Stress
  • Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
  • Set of 4
  • 180,000 PSI
  • .787″ Underhead Length
See More

Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)

Cam Bolt Lock Plate Kit

from

$18.09
Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.

Product Features:
  • Black oxide finished steel
  • Includes (3) grade 5 bolts & locking plate
  • Fits Chevrolet Small and Big Block without OE roller cam
  • Tabs bend up around bolt head to secure
See More

Mr. Gasket – Special Cam Bolt (Part No.944G)

Special Cam Bolt

from

$12.99
These Mr. Gasket cam bolt kits feature specially hardened bolts to keep the cam button secure so the cam won’t walk out of place. Can also be used as original equipment replacement. Includes three 5/16 inch-18 x 3/4 inch Long Grade 5 Bolts with Black Oxide Finish.

Product Features:
  • Black oxide coated Grade 5 steel
  • Includes flat washers to secure Mr. Gasket cam buttons 1180, 1181 and 1183
  • Can be used as OE replacement
See More

Cloyes Performance – Engine Camshaft Bushing (Part No.P9005)

Engine Camshaft Bushing

from

$24.99
Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing; 100% USA Made; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Product Features:
  • Replacement Hex-A-Just Billet Steel Camshaft Dowel Eccentric Bushing
  • 100% USA Made
  • Meets or exceeds OEM performance requirements
  • Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.
See More

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8 (Part No.7102)

Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8

from

$366.99


Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)

Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet

from

$287.99
Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Competition Cams – CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA (Part No.CL12-205-2)

CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA

from

$1257.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Competition Cams – Xtreme Energy 218/224 Hydraulic Roller Cam K-Kit for Chevrolet Big Block 396-454 (Part No.K11-422-8)

Xtreme Energy 218/224 Hydraulic Roller Cam K-Kit for Chevrolet Big Block 396-454

from

$1540.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Sealed Power – Performance Camshaft (Part No.CS-1014R)

Performance Camshaft

from

$98.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:
  • Reliable performance with significant power increase vs stock
  • Good low-end torque
  • Recommended for tow vehicle, street rod or muscle car
  • Power range: 1000-3500rpm
  • Idle: stock
  • Cruise: 1600-2200rpm
See More

Competition Cams – CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA (Part No.12-601-8)

CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA

from

$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

Edelbrock – Rollin’ Thunder Camshaft for 1965-95 B/B Chevy 396-502 (Mark IV/Gen V) (Part No.2261)

Rollin' Thunder Camshaft for 1965-95 B/B Chevy 396-502 (Mark IV/Gen V)

from

$528.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.

Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
  • Use Only Stock Ratio Rocker Arms
See More

Competition Cams – CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA (Part No.54-426-11)

CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA

from

$533.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power. Without sacrificing low RPM torque, these camshafts extend the RPM potential of GM LS e

Product Features:
  • Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
  • Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
  • Provides outstanding low RPM torque with increased stability.
See More

Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)

Rollin' Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8

from

$441.99
Product Features:
  • Hydraulic roller tappet style camshaft
  • Reduces friction and eliminates break-in problems
  • Reduces friction and eliminates break-in problems
  • Permit higher valve velocities for increased performance
  • Maintains good manifold vacuum and drivability
See More

1965 Chevrolet Impala Camshafts

Maybe you’re in the middle of a full rebuild of that 1965 Chevrolet Impala. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 46 different Camshafts in our inventory ranging from $1.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1965 Chevrolet Impala running smoothly.

Camshafts are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 1965 Chevrolet Impala. Dorman, Sealed Power, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Camshafts for your 1965 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 18 reviews in this category, some of the top rated parts include CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA with 1.0 stars.

So if you’re in the market for aftermarket Camshafts to keep your 1965 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Camshafts Brands To Make Your 1965 Chevrolet Impala Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1965 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Camshafts brands and parts.

Popular Mr. Gasket Camshafts

We carry Mr. Gasket parts in our stock across Engine Camshaft Bolts categories, plus more. For a 1965 Chevrolet Impala, our most popular Mr. Gasket Camshafts include:
Cam Bolt Lock Plate Kit
from $18.09
(2)
Cam Bolt Lock Plate Kit
Engine Camshaft Bolts

FAQs for 1965 Chevrolet Impala Camshafts

What are the most purchased Camshafts for the 1965 Chevrolet Impala?

Out of 46 Camshafts for the 1965 Chevrolet Impala, the most popular in our inventory are:
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each)
from $1.49
This product is not rated
Steel Cup Expansion Plug 1-5/8 In., Height 0.500 (sold by each)
Camshaft Plugs
Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278
from $2.29
This product is not rated
Steel Cup Expansion Plug 2-3/32 In., SC, Height 0.278
Camshaft Plugs
Engine Camshaft Bearing Set
from $43.49
(2)
Engine Camshaft Bearing Set
Camshaft Bearings

What are the top-rated 1965 Chevrolet Impala Camshafts?

Top-rated Camshafts for your 1965 Chevrolet Impala based on customer reviews/ratings are:
CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA
from $1257.99
(1)
CAM AND LIFTER KIT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA
“Front window close fit but not perfect. Doesn’t allow windows to close properly. Rear window shade didn’t fit at all. Expected much better fit for the”