1965 Chevrolet G10 Van Differentials

Essential 1965 Chevrolet G10 Van Differentials

Yukon Gear – Ring Gear Bolt (Part No.33046)

Ring Gear Bolt

from

$6.99
Ring gear bolt for GM 12 bolt car & truck, 8.2″, 8.2″ for Buick/Olds/Pontiac, 63-79 Corvette & 55-62 GM Car & Truck. 3/8″ x 24.

Product Features:
  • Ring gear bolt for GM 12 bolt passenger car and truck, 1955-1964 passenger car and truck, GM 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
  • 3/8″ x 24 thread
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Tapered Roller Bearing

from

$6.79
Product Features:
  • Brand may vary by location
See More

Powertrax – Grip LOK Traction System (Part No.LK444430)

Grip LOK Traction System

from

$658.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Pinion Nut (Part No.33150)

Pinion Nut

from

$11.99
Pinion nut for GM 12 bolt car & truck, 55-62 car & truck, 8.2″, 8.2″ Buick/Olds/Pontiac & 63-79 Corvette. 1 1/8″ socket, 7/8″ x 16 thread.

Product Features:
  • Pinion nut for GM 12 bolt car and truck, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and 1963-1979 Corvette
  • 7/8″ x 16 thread
  • 1 1/8″ socket
See More

USA Standard Gear – Bearing Kit For GM 12 Bolt Truck (Part No.58045)

Bearing Kit For GM 12 Bolt Truck

from

$179.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits GM 12 bolt truck
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Yukon Gear – Chrome Cover For GM 12 Bolt Truck (Part No.32012)

Chrome Cover For GM 12 Bolt Truck

from

$64.99
Chrome cover for GM 12T.

Product Features:
  • Fits GM 12 bolt truck
  • Chrome
See More

National – Bearings (Part No.HM89449)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1118)

Differential Pinion Shim Kit

from

$6.49


Product Features:
  • DANA PRELOAD SHIMS (D60 & D70)
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 13391)

DIFFERENTIAL GASKET

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – 12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver (Part No.30225)

12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver

from

$109.99
12P, 12T, CI VET, & 55GM 8460N REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 12 bolt passenger car, 12 bolt truck and 1963-1979 Corvette
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Differential Pinion Shim Kit

from

$12.99


Product Features:
  • KIT SHIM
See More

Felpro – Differential Carrier Gasket (Part No.RDS 4305)

Differential Carrier Gasket

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 44 Standard Rotation, 5.13 Ratio (Part No.24042)

High Performance Replacement Ring & Pinion Gear Set For Dana 44 Standard Rotation, 5.13 Ratio

from

$354.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • 8.50″ ring gear diameter
  • 26 spline pinion
  • 10 ring gear bolts
  • 5.13 ratio
See More

USA Standard Gear – Open Spider Gear Set For Dana Spicer 44, 30 Spline (Part No.39006)

Open Spider Gear Set For Dana Spicer 44, 30 Spline

from

$203.99
Product Features:
  • Spider gear kit
  • Fit Dana Spicer 44 open differential with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Yukon Gear – Bearing Race Driver (Part No.56011)

Bearing Race Driver

from

$215.99
Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.

Product Features:
  • Bearing race driver
  • Fits HM803110 race
  • All steel construction
See More

Yukon Gear – GM 12 Bolt Truck Cover Gasket (Part No.23015)

GM 12 Bolt Truck Cover Gasket

from

$12.99
12T cover gasket.

Product Features:
  • Cover gasket
  • Fits GM 12 bolt truck
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-545)

Differential Pinion Yoke Assembly

from

$313.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Driveworks – Oil Seal (Part No.S-8460N)

Oil Seal

from

$6.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

FAG US – SHAFT SEAL (Part No.SS2776)

SHAFT SEAL

from

$19.79
SHAFT SEAL

Motive Gear – Differential Gear Install Kit (Part No.GM8.5IK)

Differential Gear Install Kit

from

$65.99


Product Features:
  • MINI INSTALL KIT GM 8.5 REAR
See More

Motive Gear – Differential Gear Install Kit (Part No.GM12IK)

Differential Gear Install Kit

from

$69.99


Product Features:
  • MINI INSTALL KIT GM 12BLT 8.875 TRUCK
See More

Pro-King – Differential Internal Nest Kit (Part No.742J717)

Differential Internal Nest Kit

from

$219.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Powertrax – Lock Right Locker (Part No.1940-LR)

Lock Right Locker

from

$441.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Powertrax – Grip PRO Traction System (Part No.GT436035)

    Grip PRO Traction System

    from

    $596.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
    See More

    Yukon Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.32042)

    Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down

    from

    $414.99
    Yukon Performance steel spool for Dana 60 with 35 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits Chrysler Dana Spicer 60 with 35 spline axles
    • 4.10 and down ratio only
    • Provides 100% traction to both wheels at all times
    • Not recommended for street driven vehicles
    See More

    USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.59018)

    Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up

    from

    $369.99
    Product Features:
    • Fits Chrysler Dana Spicer 60 with 35 spline axles
    • 4.56 and up ratio only
    • Provides 100% traction to both wheels at all times
    • Not recommended for street driven vehicles
    See More

    USA Standard Gear – Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.59015)

    Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up

    from

    $289.99
    Product Features:
    • Fits Chrysler Dana Spicer 44 with 30 spline axles
    • 3.92 and up ratio only
    • Provides 100% traction to both wheels at all times
    • Not recommended for street driven vehicles
    See More

    1965 Chevrolet G10 Van Differentials

    Maybe you’re in the middle of a full rebuild of that 1965 Chevrolet G10 Van. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 74 different Differentials in our inventory ranging from $0.91 to $1,566.99. That means you can find the exact parts or products you need to keep that 1965 Chevrolet G10 Van running smoothly.

    Differentials are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1965 Chevrolet G10 Van. Valvoline, Yukon Gear, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1965 Chevrolet G10 Van, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 84 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 5.0 stars and Differential Carrier Shim Kit with 2.7 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1965 Chevrolet G10 Van rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1965 Chevrolet G10 Van Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1965 Chevrolet G10 Van demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your G10 Van the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Driveworks Differentials

    We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1965 Chevrolet G10 Van, our most popular Driveworks Differentials include:
    Oil Seal
    from $6.29
    (1)
    Oil Seal
    Differential Pinion Seals

    FAQs for 1965 Chevrolet G10 Van Differentials

    What are the most purchased Differentials for the 1965 Chevrolet G10 Van?

    Out of 74 Differentials for the 1965 Chevrolet G10 Van, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    DIFFERENTIAL GASKET
    from $7.99
    (3)
    DIFFERENTIAL GASKET
    Rear Housing Cover Gaskets
    Multi Purpose Seal
    from $13.99
    (2)
    Multi Purpose Seal
    Differential Pinion Seals

    What are the top-rated 1965 Chevrolet G10 Van Differentials?

    Top-rated Differentials for your 1965 Chevrolet G10 Van based on customer reviews/ratings are:
    Differential Ring And Pinion
    from $350.99
    (7)
    Differential Ring And Pinion
    “Great spark plugs.”
    Differential Carrier Shim Kit
    from $8.49
    (3)
    Differential Carrier Shim Kit
    “worked great”
    Differential Ring And Pinion
    from $350.99
    (2)
    Differential Ring And Pinion
    “I have a Chevy Impala 07 that runs on 3 cylinders when not needing the power of 6, and the new plugs have significantly provided an inexpensive tuneup”