1965 Chevrolet Chevelle Body Parts

Essential Body Parts for 1965 Chevrolet Chevelles

Metro Mould – Door Window Seal (Part No.ALP 5500)

Door Window Seal

from

$75.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Seal for Convertibles. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Windshield Seal (Part No.GMK4032533682)

Windshield Seal

from

$88.99
New Goodmark Black Rear Window Windlace, Trims Inside Rear Window

Product Features:
  • Trims Inside Rear Window
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Grille (Part No.GMK4030050651)

Grille

from

$271.99
New Goodmark Grille, Silver, Paint Black, For SS Models

Product Features:
  • Silver Paint Black For SS Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Deck Lid Stop Buffer (Part No.SB 34)

Deck Lid Stop Buffer

from

$28.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Trunk Bumper. Fits lower corner on deck lid. 15/16 In. O.D. 11/16 In. high. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Body Patch Panel (Part No.GMK403219068R)

Body Patch Panel

from

$74.99
New Goodmark Passenger Side Fender Rear Lower Patch Panel, 10 1/4H X 12 1/4L

Product Features:
  • 10 1/4 Inches High X 12 1/4 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Molding (Part No.GMK403225068)

Hood Molding

from

$71.99
New Goodmark Rear Hood Molding, For All Models Except 1970-72 SS

Product Features:
  • For All Models Except 1970-72 SS
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3753)

Door Jamb Switch

from

$5.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Floor Reinforcement (Part No.GMK4030517641)

Floor Reinforcement

from

$122.99
New Goodmark Floor Reinforcement Front Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Window Channel (Part No.VR 2010)

Window Channel

from

$26.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vertical Glass Run Channel. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber flocked to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – A-Pillar Trim Plug (Part No.GMK4010453621S)

A-Pillar Trim Plug

from

$14.99
New Goodmark 12 Piece Trim Panel Mounting Plug Set

Product Features:
  • 12 Piece
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Mirror Assembly: Driver Side, Manual Adjustment, 1 Pk (Part No.GMK4020410682L)

Mirror Assembly: Driver Side, Manual Adjustment, 1 Pk

from

$71.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Goodmark Driver Side Chrome Door Mirror, With OEM Style Ribbed Base, Flat Glass. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • With OEM Style Ribbed Base Flat Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Seal (Part No.LM 12-U)

Door Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door sedans and station wagons. Replaces OEM #771772/3. Each. is 115 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Deck Lid Striker (Part No.GMK4030721642)

Deck Lid Striker

from

$27.99
New Goodmark Deck Lid Striker, For All Models Except Wagon, Bolts To Striker Support

Product Features:
  • For All Models Except Wagon Bolts To Striker Support
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Tailgate Seal (Part No.TG 15)

Tailgate Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Tailgate Seals that all have that show winning look and fit. Our Tailgate Seals have a perfect fit. Tailgate Seal for 4-Door Station Wagons. Each.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Carquest Premium – Trunk Lock (Part No.TLC1052)

Trunk Lock

from

$13.49
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

KAI – Rocker Panel (Part No.GMK403047064R)

Rocker Panel

from

$148.99
New Goodmark Rocker Panel Passenger Side Outer

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Spare Tire Stop (Part No.GMK4010726621)

Spare Tire Stop

from

$7.99
New Goodmark Spare Tire Hold Down Bracket

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Brace (Part No.GMK403312070)

Fender Brace

from

$8.99
New Goodmark Front Fender Brace, Made Of Steel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – License Plate Bracket (Part No.SB 82)

License Plate Bracket

from

$6.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. License Plate Bumper. Fits a 1/4 In. hole. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Fuel Door Rubber Stop (Part No.SB 81)

Fuel Door Rubber Stop

from

$8.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Fuel Door Bumper. 7/8 In. high, 5/16 In. O.D. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Cowl Seal (Part No.CS 5)

Cowl Seal

from

$21.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood to Cowl Seal, with clips. 59-1/8 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Frame Crossmember (Part No.GMK403079064)

Frame Crossmember

from

$142.99
New Goodmark Rear Body Crossmember

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Hood Stop Buffer (Part No.SBK 204)

Hood Stop Buffer

from

$80.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Snap-In-Bumper Kit. 15-Piece Set Includes: (2)HA 5, (4)HF, (4)SB 32, (2)SB 34, (2)SB 36, (1)SB 81

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

AmeriSeal – Flexible Flocked Lining All-Rubber Window Glass Run Channel 96" Length (Part No.10873)

Flexible Flocked Lining All-Rubber Window Glass Run Channel 96" Length

from

$21.99
This Ameriseal 96″ Flexible Flocked Lining All-Rubber Window Glass Run Channel 96″ Length For Application- 1969-1971 Chevy II Chevelle is the ideal solution for all your car leakage problems. This window glass run channel is perfectly compatible with the 1979-1993 Ford Mustang Coupe model. It features a strong adhesive to keep your car completely protected from dust and water. It is an ideal solution for your old or worn-out counterpart.

Product Features:
  • Flexible model
  • Easy installation allows for user-friendly operability
  • Durably designed for longevity
  • Allows you to keep dust and water away from your car
  • Highly dense rubber body built
See More

KAI – Door Handle Set (Part No.GMK403044064S)

Door Handle Set

from

$65.99
New Goodmark Door Handle Out Frt Driver Side/Passenger Side Kit Includes Handles/Gaskets/Pushbuttons/Hardware

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Handle Remote (Part No.GMK4020443671P)

Door Handle Remote

from

$75.99
New Goodmark Driver And Passenger Side Pair Of Door Latch Mechanical Relays, For Vehicles With Standard Interior

Product Features:
  • For Vehicles With Standard Interior
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Emblem (Part No.GMK4032130692P)

Fender Emblem

from

$72.99
New Goodmark Fender Emblem, SS, 2 Required

Product Features:
  • SS 2 Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Energy Suspension – Body Mount Set (Part No.3.4114R)

Body Mount Set

from

$126.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

Upgrade your 1965 Chevrolet Chevelle with Top-Quality Body Parts

When it comes to maintaining or upgrading your 1965 Chevrolet Chevelle, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Body Parts are key to keeping your Chevelle functioning at its best. At Advance Auto Parts, we offer a wide selection of 110 Body Parts for the 1965 Chevrolet Chevelle, designed to meet your needs without breaking the bank. From Vehicle Door replacements to Vehicle Windows upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 1965 Chevrolet Chevelle at great prices. Our Body Parts inventory for this model ranges from just $1.79 to $356.99, with an average price of $65.66. Our 110 Body Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1965 Chevrolet Chevelle without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Chevrolet Chevelle, we stock popular OEM and aftermarket Body Parts from top names like Dorman Locksmart, and more. Dorman Body Parts start at just $7.99 and boast an impressive 4 stars average rating from customers. With 170 customer reviews and counting, our 1965 Chevrolet Chevelle Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1965 Chevrolet Chevelle is always ready to roll. We’re committed to providing you with everything you need to keep your Chevelle in top shape, all in one place. Start shopping confidently below for your 1965 Chevrolet Chevelle!

Best-Selling Vehicle Doors for 1965 Chevrolet Chevelles

Enhance the driving experience in your Chevrolet with 20 quality Vehicle Door components, starting at $1.79.

Dorman – Help – Door Striker Bolt Kit – 7/16 In.-14 (Part No.38428)

Door Striker Bolt Kit - 7/16 In.-14

from

$11.99
This door lock striker is designed to match the fit and function of the original striker on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this door lock striker is designed to match the fit and function of the original striker on specified vehicles.
  • Restores functionality – reliable replacement for an original part that has failed due to collision damage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Locksmart – Door Lock Kit (Part No.DL15800)

Door Lock Kit

from

$24.29
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:
  • All door locks are perfectly matched to the original for precision installation
  • Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Dorman – Help – Door Hinge Bushing Assortment – 4 Sizes (Part No.38374)

Door Hinge Bushing Assortment - 4 Sizes

from

$7.99
This door hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Needa Parts – Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height (Part No.38375)

Door Hinge Bushings, .345 In. Id X .420 In. Od X .305 In. Height

from

$1.79
This door hinge bushing is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge bushing matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Door Jamb Switch (Part No.SAA3759)

Door Jamb Switch

from

$10.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Door Sill Plate Screw (Part No.GMK4030575644S)

Door Sill Plate Screw

from

$11.99
New Goodmark 8 Piece Sill Plate Screw Kit

Product Features:
  • 8 Piece
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Seal (Part No.LM 12-P)

Door Seal

from

$195.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Front Molded Door Seals with Clips. For 4-door sedans and station wagons. Replaces OEM #4540546/7. Each. is 124-1/2 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Seal (Part No.LM 12-Q)

Door Seal

from

$195.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door sedans only. Replaces OEM #4895420/1. Each. is 115-1/2 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Hinge (Part No.GMK4030401642R)

Door Hinge

from

$155.99
New Goodmark Passenger Side Front Lower Door Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Pillar Post Seal (Part No.CZ 8108)

Door Pillar Post Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Finely crafted and detailed. All of Metro’s Door Lock Pillar Seals are the best available anywhere. They are the best, with molded-in steel cores and superbly detailed outer rubber. Windshield Pillar Post Seals for Convertibles. Two pieces, 24-1/2 In. long. Pair.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Seal (Part No.LM 12-N)

Door Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Molded Door Seals with clips. For 2-door wagons. Replaces OEM #4406677/8. Each. is 143-1/2 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Seal (Part No.LM 12-Q/W)

Door Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Molded Door Seals with Clips. For 4-door station wagons only. Each. is 117-1/2 In. long. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Door Seal (Part No.LM 12-D)

Door Seal

from

$78.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Seal, with Clips and Molded Ends. For 2-Door Sedans. Replaces OEM #4892622/3. Pair.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Seal (Part No.GMK4030412641P)

Door Seal

from

$76.99
New Goodmark Driver And Passenger Side Pair Of Black Door Jamb Windlaces To Repair Two Doors On Sedan And Wagon Models

Product Features:
  • Pair
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Hinge Bolt (Part No.GMK403040264S)

Door Hinge Bolt

from

$75.99
New Goodmark 24 Piece Door Hinge Bolt Set

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Window Seal (Part No.ALP 5500)

Door Window Seal

from

$75.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Rear Quarter Window Seal for Convertibles. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Hinge (Part No.GMK404340261S)

Door Hinge

from

$39.99
New Goodmark Door Hinge Repair Kit To Repair 2 Front Doors

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Window Seal (Part No.ALP 5001)

Door Window Seal

from

$29.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Ready-to-install Door Weatherstripping that comes with correct tool-installed clips and pins plus molded ends that are truly softer than other available reproductions. All are made of the finest weather resistant and ozone resistant sponge. Door Lock Pillar Seal. Used on lower leading edge of quarter window. Highly detailed, made with steel cores. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Door Lock Striker (Part No.GMK403060664)

Door Lock Striker

from

$17.99
New Goodmark Door Lock Striker, Allen Head Bolt With Collar

Product Features:
  • Allen Head Bolt With Collar
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Door Stop (Part No.SB 35)

Door Stop

from

$4.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Bumper. Made with twin retainers. 1-1/8 In. high X 9/16 In. wide X 1 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Most Popular 1965 Chevrolet Chevelle Vehicle Windows

Customize your Chevrolet with 1 Vehicle Windows products like Window Channels, all priced under $26.99.

Metro Mould – Window Channel (Part No.VR 2010)

Window Channel

from

$26.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Vertical Glass Run Channel. Pair.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber flocked to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Top Picks for 1965 Chevrolet Chevelle Bodies and Fender Parts

Upgrade Chevrolet Chevelles with top-quality Bodies and Fender Parts parts, including 31 OEM and aftermarket selections for your 1965 model.

Energy Suspension – Body Mount Set (Part No.3.4111R)

Body Mount Set

from

$148.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

KAI – Deck Lid Seal (Part No.GMK403070364)

Deck Lid Seal

from

$29.99
New Goodmark Trunk Weatherstrip, Fits All A-Body Models And X Body Models Except Hatchback Or Wagon

Product Features:
  • Fits All A-Body Models And X Body Models Except Hatchback Or Wagon
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – A-Pillar Trim Plug (Part No.GMK4010453621S)

A-Pillar Trim Plug

from

$14.99
New Goodmark 12 Piece Trim Panel Mounting Plug Set

Product Features:
  • 12 Piece
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rear Body Panel (Part No.GMK4030850641)

Rear Body Panel

from

$186.99
New Goodmark Rear Body Panel, Center Section, Excludes Wagon

Product Features:
  • Center Section Excludes Wagon
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Reinforcement (Part No.GMK4030517643)

Floor Reinforcement

from

$155.99
New Goodmark Floor Reinforcement Rear Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Energy Suspension – Body Mount Set (Part No.3.4111G)

Body Mount Set

from

$148.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:
  • Replace to Restore Ride Height
  • Gain Durability
  • Stronger Than Original Rubber Mounts
See More

KAI – Rocker Panel (Part No.GMK403047064R)

Rocker Panel

from

$148.99
New Goodmark Rocker Panel Passenger Side Outer

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.GMK403047064L)

Rocker Panel

from

$143.99
New Goodmark Rocker Panel Driver Side Outer

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Frame Crossmember (Part No.GMK403079064)

Frame Crossmember

from

$142.99
New Goodmark Rear Body Crossmember

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Reinforcement (Part No.GMK4030517641)

Floor Reinforcement

from

$122.99
New Goodmark Floor Reinforcement Front Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Reinforcement (Part No.GMK4030517642)

Floor Reinforcement

from

$118.99
New Goodmark Floor Reinforcement Cntr Brace Floor Pan Brace

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK403051164R)

Floor Pan

from

$113.99
New Goodmark Cab Floor Rear Passenger Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated

Product Features:
  • Under Rear Seat 30 Inch X 26 Inch EDP Coated
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan (Part No.GMK403051164L)

Floor Pan

from

$112.99
New Goodmark Cab Floor Rear Driver Side, Under Rear Seat, 30 Inch X 26 Inch, EDP Coated

Product Features:
  • Under Rear Seat 30 Inch X 26 Inch EDP Coated
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Body Mount Set (Part No.GMK4030990641S)

Body Mount Set

from

$108.99
New Goodmark Body Mount Set, 10 Bushings, Except Convertible/Wagon/El Camino/SS

Product Features:
  • 10 Bushings Except Convertible/Wagon/EL Camino/SS
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Hardtop Moulding (Part No.RR 5000)

Hardtop Moulding

from

$94.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro makes a huge line of Roof Rail Seals that all have that show winning look and fit. Our Roof Rail Seals have a perfect fit. Molded Roof Rail Seals for 2-Door Hardtop Only. Pair. R&L.

Product Features:
  • Jet black to match the color of the original part
  • There’s no need to slam when you use Metro SUPERsoft weatherstripping products
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Rocker Panel (Part No.GMK403046064L)

Rocker Panel

from

$93.99
New Goodmark Rocker Panel Driver Side Inner

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan Toe Board (Part No.GMK403037064R)

Floor Pan Toe Board

from

$92.99
New Goodmark Passenger Side T Board Patch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Pan Toe Board (Part No.GMK403037064L)

Floor Pan Toe Board

from

$92.99
New Goodmark Driver Side T Board Patch

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Dash Panel Patch (Part No.GMK403052164)

Dash Panel Patch

from

$80.99
New Goodmark Dash Panel Patch Upper, 57 Inch X 2 Inch, Between Dash And Windshield

Product Features:
  • 57 Inch X 2 Inch Between Dash And Windshield
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel (Part No.GMK403069064R)

Quarter Panel

from

$79.99
New Goodmark Passenger Side Rear Lower Quarter Panel, 7 3/4 Inches High X 29 1/2 Inches Long

Product Features:
  • 7 3/4 Inches High X 29 1/2 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Quarter Panel (Part No.GMK403069064L)

Quarter Panel

from

$79.99
New Goodmark Driver Side Rear Lower Quarter Panel, 7 3/4 Inches High X 29 1/2 Inches Long

Product Features:
  • 7 3/4 Inches High X 29 1/2 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Body Patch Panel (Part No.GMK403019064R)

Body Patch Panel

from

$74.99
New Goodmark Passenger Side Fender Rear Lower Patch Panel, 11 Inches High X 13 1/2 Inches Long

Product Features:
  • 11 Inches High X 13 1/2 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Body Patch Panel (Part No.GMK403019064L)

Body Patch Panel

from

$74.99
New Goodmark Driver Side Fender Rear Lower Patch Panel, 11 Inches High X 13 1/2 Inches Long

Product Features:
  • 11 Inches High X 13 1/2 Inches Long
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Liftgate Seal (Part No.GMK403071464S)

Liftgate Seal

from

$73.99
New Goodmark Trunk Lid Weatherstrip Gutter, 2 Piece, Except Wagon/El Camino

Product Features:
  • 2 Piece Except Wagon/El Camino
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Trim (Part No.GMK403095565L)

Wheel Arch Trim

from

$55.99
New Goodmark Driver Side Rear Wheel Opening Molding, For Malibu And SS Models, Made Of Aluminum

Product Features:
  • For Malibu And SS Models Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Emblem (Part No.GMK4010130653)

Fender Emblem

from

$44.99
New Goodmark Fender Emblem, 327, Made Of Steel

Product Features:
  • 327 Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Molding Clip (Part No.GMK4030711642)

Rocker Molding Clip

from

$7.99
New Goodmark Pinchweld Moulding Clip, Use As Required

Product Features:
  • Use As Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Spare Tire Stop (Part No.GMK4010726621)

Spare Tire Stop

from

$7.99
New Goodmark Spare Tire Hold Down Bracket

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Brace (Part No.GMK403012064)

Fender Brace

from

$5.99
New Goodmark Driver Or Passenger Side Front Fender Brace Front, Made Of Steel

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Plug (Part No.GMK4030512641A)

Floor Plug

from

$4.99
New Goodmark Galvanized Floor Drain Plug With Notch

Product Features:
  • With Notch
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Floor Plug (Part No.GMK403051264A)

Floor Plug

from

$4.99
New Goodmark Galvanized Floor Drain Plug, Use As Required

Product Features:
  • Use As Required
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

In-Demand Vehicle Hoods for 1965 Chevrolet Chevelles

Select from 16 premium Vehicle Hoods parts for your 1965 Chevrolet Chevelle, with prices ranging from $5.99 to $233.99.

KAI – Hood Hinge (Part No.GMK4020210672L)

Hood Hinge

from

$67.99
New Goodmark Hood Hinge, Driver Side, With Spring

Product Features:
  • Driver Side With Spring
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Buffer (Part No.GMK4010205642S)

Buffer

from

$18.99
Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GMK402021067AR)

Hood Hinge

from

$233.99
New Goodmark Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GMK402021067AL)

Hood Hinge

from

$233.99
New Goodmark Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Hood Stop Buffer (Part No.SBK 201)

Hood Stop Buffer

from

$100.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Snap-In-Bumper Kit. 14-Piece Set Includes: (4)DB 33, (2)HA 5, (4)HF 38, (2)SB 34, (2)SB 36

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Hood Hinge (Part No.GMK4020210672R)

Hood Hinge

from

$67.99
New Goodmark Hood Hinge, Passenger Side, With Spring

Product Features:
  • Passenger Side With Spring
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GMK402021067R)

Hood Hinge

from

$63.99
New Goodmark Passenger Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Hinge (Part No.GMK402021067L)

Hood Hinge

from

$63.99
New Goodmark Driver Side Hood Hinge

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Cowl Seal (Part No.CS 4)

Cowl Seal

from

$18.99
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Cowl and Hood Seal. 43-1/2 In. long. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Hood Hinge Spring (Part No.GMK401021164)

Hood Hinge Spring

from

$15.99
New Goodmark Driver Or Passenger Side Hood Hinge Spring

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Hood Stop Buffer (Part No.HF 5)

Hood Stop Buffer

from

$11.79
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Hood Molding (Part No.GMK4030250641S)

Hood Molding

from

$9.99
New Goodmark 9 Piece Hood Lip Molding Hardware Kit

Product Features:
  • 9 Piece
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Hood Stop Buffer (Part No.GMK401020562P)

Hood Stop Buffer

from

$9.99
New Goodmark Pair Of Hood Adjustment Bumper Caps

Product Features:
  • Made Of Rubber
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Hood Stop Buffer (Part No.HF 38)

Hood Stop Buffer

from

$9.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood Side Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense material to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Metro Mould – Hood Stop Buffer (Part No.HF 74)

Hood Stop Buffer

from

$6.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Hood to Fender Bumper. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Cowl Seal (Part No.GMK4030386644P)

Cowl Seal

from

$5.99
New Goodmark Pair Of Driver And Passenger Side Cowl Vent Gaskets

Product Features:
  • Pair
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Most Sold 1965 Chevrolet Chevelle Vehicle Latches and Handles

Explore our best-selling Chevrolet parts for the 1965 Chevelle among 8 OEM and aftermarket options starting from $11.29.

KAI – Window Crank Handle (Part No.GMK403042165)

Window Crank Handle

from

$22.99
New Goodmark Window Crank Handle With Chrome Knob

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Handle Remote (Part No.GMK4020443671P)

Door Handle Remote

from

$75.99
New Goodmark Driver And Passenger Side Pair Of Door Latch Mechanical Relays, For Vehicles With Standard Interior

Product Features:
  • For Vehicles With Standard Interior
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Door Handle Set (Part No.GMK403044064S)

Door Handle Set

from

$65.99
New Goodmark Door Handle Out Frt Driver Side/Passenger Side Kit Includes Handles/Gaskets/Pushbuttons/Hardware

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Vent Window Latch (Part No.GMK401041962L)

Vent Window Latch

from

$47.99
New Goodmark Driver Side Vent Window Handle, For All Except 1966-67 A-Body Sport Models

Product Features:
  • For All Except 1966-67 A-Body Sport Models
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Exterior Door Handle Gasket (Part No.MP 989-C)

Exterior Door Handle Gasket

from

$20.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Door Handle Pads. 2-5/8 In. long & 1-1/4 In. long. Set R&L.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

KAI – Crank Handle C-Clip (Part No.GMKHWB2404)

Crank Handle C-Clip

from

$13.99
New Goodmark Box Of 100 Horsesh Type Door And Window Crank Handle Clips

Product Features:
  • Made Of Die Cast
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Interior Door Handle (Part No.GMK401044165)

Interior Door Handle

from

$13.99
New Goodmark Driver Or Passenger Side Inside Door Handle, For All Models Except Paddle Style Or Camaro/Firebird With Deluxe Interior

Product Features:
  • For All Models Except Paddle Style Or Camaro/Firebird With Deluxe Interior
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metro Mould – Exterior Door Handle Gasket (Part No.UM 2005-100)

Exterior Door Handle Gasket

from

$11.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Unbeaded Door Handle Mounting Pads. 4-Piece Set

Product Features:
  • Jet black to match the color of the original part
  • Flat Gasket
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Top-Rated Body Parts Brands For Your 1965 Chevrolet Chevelle

Shop for the best-rated brands offering Body Parts and other products for your 1965 Chevrolet Chevelles. Below you’ll find some of our best rated Body Parts from Dorman and Locksmart, and more. Body Parts from these brands that fit a 1965 Chevelle start at just $7.99 and are rated as high as 4 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 1965 Chevrolet Chevelle Body Parts

When it comes to maintaining or upgrading your 1965 Chevrolet Chevelle, using quality Body Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Body Parts, specifically designed for the 1965 Chevrolet Chevelle. With over 2 Dorman brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.99, with an average price of just $9.99. Plus, with over 12 customer reviews and an average rating of 4 stars, you can trust that our Dorman Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Door Striker Bolt Kit - 7/16 In.-14
from
$11.99

(5)

Door Striker Bolt Kit – 7/16 In.-14

“Works well with new door latch.”

Door Hinge Bushing Assortment - 4 Sizes
from
$7.99

(7)

Door Hinge Bushing Assortment – 4 Sizes

“Returned because I didn’t need them.”

Popular Locksmart 1965 Chevrolet Chevelle Body Parts

Locksmart auto parts is one of the highest quality Body Part brands in the market. Any 1965 Chevrolet Chevelle owner should feel confident when installing genuine Locksmart parts in their vehicle. To ensure the best fit and performance for your 1965 Chevelle, Advance Auto Parts carries a full inventory of 1 Locksmart Body Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Locksmart Body Parts range up to $24.29, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

Door Lock Kit
from
$24.29

(4)

Door Lock Kit

“Easy to install. The lock kit works great too”

FAQs for 1965 Chevrolet Chevelle Body Parts

Which Body Parts are best-sellers for 1965 Chevrolet Chevelles?

Out of 110 Body Parts that fit 1965 Chevrolet Chevelles, the following parts are the top sellers:

What’s the price range for 1965 Chevrolet Chevelle Body Parts?

Body Part prices for the 1965 Chevrolet Chevelle start at $1.79 and go up to $356.99 for the most premium parts.

What’s the average price of a Body Part for a 1965 Chevrolet Chevelle?

The average price for Body Parts for the 1965 Chevrolet Chevelle is $65.66. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Chevrolet Chevelle model years?

Yes, we currently carry Body Parts for 11 model years of Chevrolet Chevelles between 1964 and 1975. Body Parts are bought most frequently for the following model years: 1975, 1974, 1973, 1972, 1971, 1970, 1969, 1968, and 1967.

What are the cheapest Body Parts for my 1965 Chevrolet Chevelle?

The cheapest 1965 Chevrolet Chevelle Body Parts we carry in stock are:

What are the top-rated Body Parts that fit the 1965 Chevrolet Chevelle?

Out of 170 reviews by customers, our 1965 Chevrolet Chevelle Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 1965 Chevrolet Chevelle and their top-rated products:

What types of Body Parts do you sell for my 1965 Chevrolet Chevelle?

Can I get help with 1965 Chevrolet Chevelle Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Body Parts and more.

What is your return policy for Chevrolet Chevelle Body Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Chevelle Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.