1965 Buick Electra Performance and Racing Products
More 1965 Buick Electra Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1965 Buick Electra, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1965 Buick Electra Performance and Racing Products
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$36.99
Brake Bleeder Screws
Energy Suspension – Track Arm Bushing Set (Part No.3.7111R)
Mr. Gasket – Breather/Oil Filler Cap (Part No.9810)
from
$11.99
This chrome plated breather, embossed with a Mr. Gasket logo, is perfect for race car vacuum balance systems and OEM use. It fits any 1 1/4 inch diameter hole. It has metal baffle/foam element with 1 inch outer diameter neck and 5/8 inch outer diameter breather tube.
Product Features:
See More
Product Features:
- Chrome plated steel
- Internally baffled with filter
- Fits valve covers with 122 in. opening
Accel – 300+Race, Spark Plug Wire Set, 8.8mm (Part No.7043)
from
$141.99
These ACCEL wire sets are custom tailored for race engines and their builders. The oversize 8.8 mm wire is rated for 600 degrees Fahrenheit and 60kV. Resists heat, chemicals and moisture. High density insulation eliminates arcing. Route over and under headers.
Product Features:
See More
Product Features:
- 150 Ohms Per Foot
- 8.8mm Oversize Silicone Jacket
Motive Gear – Performance Differential Ring and Pinion (Part No.G885373)
Mr. Gasket – Intake Manifold Bolts (Part No.957G)
from
$21.99
Choose from grade 5 hex or socket head intake bolts or grade 8 bolts with twelve point smaller-than-standard head and flange, ideal for where space is minimal. Bolts and washers are bright zinc plated for protection and appearance.
Product Features:
See More
Product Features:
- Grade 8 material
- Extra thick flat washers
- Ideal for minimal space
- 12-pt head and flange
- Zinc plated for protection
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Control Arm Bushing Set (Part No.3.3159G)
from
$149.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Mallory – Kit (Part No.401)
from
$14.99
Kit
Accel – Adjustable Vacuum Advance, GM V8 Point Distributor (Part No.31034)
from
$46.99
Comes with detailed instructions. Permits infinite adjustment. Instantly increase your horsepower. Maximum possible spark advance. Not legal for sale or use in CA.
Product Features:
See More
Product Features:
- Adjustable Vacuum Advance
- Increases Horsepower And Throttle Response
- Includes Allen Wrench For Adjustments
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)
from
$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Accel – Super Coil (Part No.140005)
from
$95.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct plug replacements for OEM coils. They feature bodies and, or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-32
Accel – Points Eliminator Kit (Part No.2010)
from
$98.99
Put an end to high maintenance points ignition systems by installing an ACCEL points eliminator ignition conversion kit. By utilizing specialized electronic circuitry and an infrared signal, ignition timing is stable from 1 to 10,000 RPM. More accurate ignition timing than any other type of system. Improves performance and fuel efficiency. Easy to install with simple hand tools. Reduced maintenance-eliminates changing points forever. Latest thermal clad based surface mount construction for maximum dependability and long life. Available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- More Accurate Ignition Timing
- Improves Performance And Fuel Economy
- Provides More Accurate Ignition Timing
- Easy To Install w/Hand Tools
- Reduced Maintenance
- Thermal Clad Based Surface Mount Construction
- Utilizes Specialized Electronic Circuitry
- Ignition Timing Is Stable From 1 To 10000rpm
B & M – Traveler Converter (Part No.30423)
from
$375.99
Torque Converter – Traveler Converter (SUV and Light Truck) for GM 1968 to 1981 TH350, TH375B APPLICATION: GM 1968 to 1981 TH350, TH375B (6) (will not fit TH-350C) Provides slightly higher stall speed than stock to improve pulling power at low speeds. New
Product Features:
See More
Product Features:
- Ideal For Motor Homes
- Ideal For Towing Applications
- Precision Pump Drive Tube
- Heavy Duty Needle Bearings
- Furnace Brazed
Energy Suspension – Control Arm Bushing Set (Part No.3.3132G)
from
$154.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Sway Bar End Link Kit (Part No.9.8119G)
from
$29.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Motive Gear – Differential Mini Spool (Part No.MS10C-28)
Edelbrock – Nitrous Performer EFI Wet System (Part No.71820)
from
$730.99Product Features:
- Best Way To Get A Major Power Increase
- Power Increases From 50-70 HP
- Work With Stock ECU
- Simple Installation
Energy Suspension – Strut Rod Bushing Set (Part No.3.7114G)
from
$23.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
Accel – Distributor Cap And Rotor Kit (Part No.8120)
Edelbrock – Thunder AVS Carburetor #1826 650 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.1826)
from
$464.99
New or reconditioned 650cfm. Square-flange. Electric choke without EGR. Primary jet 0.095. Secondary jet 0.098. Metering Rod 0.065 x 0.047. Dual plane intake. Spring loaded needles and seat increase performance. New qwik-tune adjustable secondary air valve. Distinctive black accented hardware. Lightweight ball burnished aluminum. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage.
Product Features:
See More
Product Features:
- Spring Loaded Needles/Seat Increase Performance
- New Qwik-Tune Adjustable Secondary Air Valve
- Distinctive Black Accented Hardware
- Lightweight Ball-Burnished Aluminum
- No Gaskets Below Fuel Level to Prevent Leakage
- Metering Rod/Step Up Springs Can Be Changed Easily
- GM/AMC-Style Throttle Linkage
MSD Ignition – Distributor; Buick V8 Billet; 400-455 (Part No.8517)
from
$461.99
This distributor uses a high output magnetic trigger to fire an MSD Ignition control. Accurate trigger signals and spark delivery are the responsibility of the QPQ-coated steel shaft. A sealed ball bearing and long sintered bushing hold this shaft stable at any RPM. An adjustable mechanical advance mechanism is mounted on top of the shaft. Nylon pads ensure smooth movement of the fine balanced weights for accurate timing advancement. A variety of advance stop bushings and springs are supplied so you can dial in a custom curve.
Product Features:
See More
Product Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- Must Be Used w/An MSD Ignition Control
- Must Be Used w/An MSD 6/7/8/10 Series Ignition
- Mech. advance assem. can be locked out for crank trigger systems
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- No CARB Exemption Order Number
Hays – Street/Strip; Clutch Kit (Part No.85-114)
from
$553.99
High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.
Product Features:
See More
Product Features:
- Built As Matched Assembly
- Exceptional Performance
- Exceptional Durability
- Long Term Dependability
Hays – Street; Clutch Kit (Part No.85-111)
from
$701.99
Matched assembly for maximum reliability. An excellent choice for high performance street applications.
Product Features:
See More
Product Features:
- Built As Matched Assembly
- Exceptional Performance
- Exceptional Durability
- Long Term Dependability
- Designed for Street And Street Strip Applications
Hurst – Automatic Shifter, Quarter Stick Powerglide (Part No.3160001)
from
$409.99
The Hurst Quarter Stick is designed for 2 and 3 speed applications. Its precision gate style mechanism ensures a positive feel. It features, a neutral safety switch, NHRA approved reverse lockout, and a brushed aluminum cover.
Product Features:
See More
Product Features:
- Forward and Reverse Shift Patterns
- Chrome Plated Trigger for Detent Activity
- Factory Neutral Safety Switch
- Compact And Lightweight
- Roller Detent with Shifter Pattern
B & M – Automatic Shifter, Megashifter-Right Hand Drive (Part No.80685)
from
$456.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat app
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (200-300-400+ Hp) (Part No.70056)
from
$1243.99
Designed for carburetor V8 engines. Power increases from 200 to 400 horsepower. Simple to install. Shorter spray bars. More even distribution across the plenum. A more balanced air and fuel ratio. Quicker response time.
Product Features:
See More
Product Features:
- Designed For Carbureted V8 Engines
- Power Increases From 200-400_ HP
- Simple To Install
- Shorter Spray Bars
- More Even Distribution Across The Plenum
- A More Balanced Air/Fuel ratio
- Quicker Response Time
Popular 1965 Buick Electra Performance and Racing Products Categories
1965 Buick Electra Performance and Racing Products
You count on your 1965 Buick Electra to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 58 Performance and Racing Products ranging in price from $5.99 to $1,243.99, you’re sure to find everything you need for your 1965 Buick Electra.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 12 different brands like Energy Suspension, Accel, and Mr. Gasket. 1965 Buick Electra Performance and Racing Products start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 88 extensive product reviews on 1965 Buick Electra Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Distributor Cap And Rotor Kit with 4.3 stars and Automatic Shifter, Unimatic Shifter with 4.3 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1965 Buick Electra below to get started!
Top-Rated Performance and Racing Products Brands For Your 1965 Buick Electra
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Buick Electra running right for years to come. In our inventory you’ll find brands like Energy Suspension, Accel, Mr. Gasket, and even more.
Popular Mallory Performance and Racing Products
You’ll find popular Mallory brand products across Performance Ignition Products. All are waiting to get your 1965 Buick Electra back on the road. Some of the top-rated Mallory products in these categories are:
Top-Rated Performance and Racing Products
If are what you’re looking for, our inventory holds plenty. We stock brand Performance and Racing Products for your 1965 Buick Electra, and some of our most reviewed parts include:
FAQs for 1965 Buick Electra Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1965 Buick Electra?
Out of 58 Performance and Racing Products for the 1965 Buick Electra, the most popular in our inventory are:
What are the top-rated 1965 Buick Electra Performance and Racing Products?
Top-rated Performance and Racing Products for your 1965 Buick Electra based on customer reviews/ratings are:
from
$40.99
(3)
Distributor Cap And Rotor Kit
“the distributer cap has copper electrodes not like the cheeper aluminum electrodes you get in other distributer caps.
the rotor had no screws. had to ”
